DC-ISIS-MIB :: isisSysMaxLSPGenInt

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DC-ISIS-MIB › isisSysMaxLSPGenInt

isisSysMaxLSPGenInt

Module: DC-ISIS-MIB

OID (symbolic): DC-ISIS-MIB::isisSysMaxLSPGenInt

OID (numeric): 1.2.826.0.1.1578918.5.63.1.1.1.1.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: Maximum interval, in seconds, between generated LSPs by this instance of the protocol. This object follows the resettingTimer behavior. The value must be greater than any value configured for isisSysLevelMinLSPGenInt, and should be at least 300 seconds less than isisSysMaxAge.

Note that this value is specified in seconds whereas isisSysLevelMinLSPGenInt is specified in milliseconds.

What is isisSysMaxLSPGenInt?

Sets the maximum interval, in seconds, between regenerations of this router's own LSPs, defaulting to 900 seconds; it must be set higher than isisSysLevelMinLSPGenInt and should be at least 300 seconds below isisSysMaxAge so a refreshed LSP always arrives before the old one would expire. An admin tightens this interval on a network where faster LSP refresh is needed, while keeping the 300-second safety margin against isisSysMaxAge to avoid routes flapping from premature expiry.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.2member_bodyIEEE802dot11-MIB
1.2.826gbMETASWITCH-MIB
1.2.826.0gbNationalMETASWITCH-MIB
1.2.826.0.1gbNatCompanyMETASWITCH-MIB
1.2.826.0.1.1578918dataConnectionMETASWITCH-MIB
Numeric OIDNameModule
1.2.826.0.1.1578918.5.63.1dcIsisMibDC-ISIS-MIB
1.2.826.0.1.1578918.5.63.1.1isisObjectsDC-ISIS-MIB
1.2.826.0.1.1578918.5.63.1.1.1isisSystemDC-ISIS-MIB
1.2.826.0.1.1578918.5.63.1.1.1.1isisSysTableDC-ISIS-MIB
1.2.826.0.1.1578918.5.63.1.1.1.1.1isisSysEntryDC-ISIS-MIB
1.2.826.0.1.1578918.5.63.1.1.1.1.1.6isisSysMaxLSPGenIntDC-ISIS-MIB