All MIBs › Cxr-connect-MIB › cpu1
cpu1
Module: Cxr-connect-MIB
OID (symbolic): Cxr-connect-MIB::cpu1
OID (numeric): 1.3.6.1.4.1.3810.1.1.1
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: An estimate of the CPU current load based on the idle/busy state of processor. The measurement is done with a pre-calibrated loop, that means it's possible to have more than 100%.
What is cpu1?
This Gauge estimates the current CPU load, as a percentage, of the device's processor based on its idle/busy cycles measured against a pre-calibrated loop. The MIB notes the measurement method can report over 100% under heavy load, so an admin should watch for sustained high readings rather than treating a brief spike above 100 as an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3810.1.1.1 snmpwalk -v2c -c public <target> Cxr-connect-MIB::cpu1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3810.1.1.1.1 snmpget -v2c -c public <target> Cxr-connect-MIB::cpu1.1
Start monitoring CXR serial/WAN connectivity equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Cxr-connect-MIB::cpu1 OID value, configure state conditions and alerts, and monitor any CXR serial/WAN connectivity equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3810 | cxr_connect | Cxr-connect-MIB |
| 1.3.6.1.4.1.3810.1 | cxr_connect_sys | Cxr-connect-MIB |
| 1.3.6.1.4.1.3810.1.1 | cpuload | Cxr-connect-MIB |
| 1.3.6.1.4.1.3810.1.1.1 | cpu1 | Cxr-connect-MIB |