Com-Server-Intern-MIB :: wtSeriUdpCAddress

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Com-Server-Intern-MIB › wtSeriUdpCAddress

wtSeriUdpCAddress

Module: Com-Server-Intern-MIB

OID (symbolic): Com-Server-Intern-MIB::wtSeriUdpCAddress

OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.6.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Activating this option activates UDP client mode for changing UDP servers. The address of the UDP server does not have to be permanently configured, but rather is sent on the serial interface before the user data as an ASCII string. The string for the addressing is not sent. There are two possibilities for string format: 1. The parameters 'wtSeriUdpServerPort' and 'wtSeriUdpServerIp' are equal to zero. Format: C IP address, Port number (e.g. 'C172.16.231.101,4800') C URL, Portnummer (e.g. 'Cworkpc.homeip.net,4800') 2. The parameter 'wtSeriUdpServerPort' contains the Default Port (e.g., 4800), 'wtSeriUdpServerIP' contains the first three bytes of the IP address (e.g., 172.16.231.0) Format: C4.byte IP address (e.g., 'C101') The string is not allowed to contain any spaces!

What is wtSeriUdpCAddress?

Read-write INTEGER switch enabling UDP 'changing address' client mode, where the destination server's address/port is sent as an ASCII command string on the serial line (e.g. 'C172.16.231.101,4800<CR>') ahead of the data rather than fixed in wtSeriUdpServerIp/Port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.6.1.7
snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtSeriUdpCAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.6.1.7.1
snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtSeriUdpCAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.6.1.7.1 i <value>

Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtSeriUdpCAddress OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5040wutCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1wtComServerCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1wtComServerInternCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1wtConfigurationCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3wtSeriPortSetupCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.6wtSeriUdpClientTableCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.6.1wtSeriUdpClientEntryCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.6.1.7wtSeriUdpCAddressCom-Server-Intern-MIB