All MIBs › Com-Server-Intern-MIB › wtSeriTcpResponseMode
wtSeriTcpResponseMode
Module: Com-Server-Intern-MIB
OID (symbolic): Com-Server-Intern-MIB::wtSeriTcpResponseMode
OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.5.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: In Response Mode the application, special characters are output which are used to inform the application in the serial terminal device about the network-side connection status of the Com-Server This function is only available in TCP client mode. The following messages are output on the serial port: C (connected): The connection was opened successfully. There is a TCP connection to the server. N (not connected): The connection was not opened successfully. The TCP server is not responding. D (disconnected): The connection query was rejected by the TCP server or a previously open connection was properly ended by the TCP server or by the Com-Server. Ixxx.xxx.xxx.xxx (invoked by...): A client application on the indicated station has successfully opened a TCP connection to the Com-Server (e.g., I172.20.20.1).
What is wtSeriTcpResponseMode?
Read-write INTEGER switch that, in TCP client mode, makes the Com-Server emit single-character status codes on the serial port ('C'=connected, 'N'=not connected, 'D'=disconnected, 'Ixxx.xxx.xxx.xxx'=inbound connection from that IP) so an attached serial device can react to the network connection state without polling SNMP.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.10 snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpResponseMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.10.1 snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpResponseMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.10.1 i <value>
Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtSeriTcpResponseMode OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1 | wtComServerIntern | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1 | wtConfiguration | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3 | wtSeriPortSetup | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5 | wtSeriTcpClientTable | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1 | wtSeriTcpClientEntry | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.10 | wtSeriTcpResponseMode | Com-Server-Intern-MIB |