All MIBs › Com-Server-Intern-MIB › wtSeriTcpDispString1
wtSeriTcpDispString1
Module: Com-Server-Intern-MIB
OID (symbolic): Com-Server-Intern-MIB::wtSeriTcpDispString1
OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.5.1.6
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: These parameters allow compact sending of serial data to the network; the serial data stream is not broken up randomly, but rather serial packets can be sent in their original context even over the network as one packet. Enter in wtSeriTcpDispString1 and/or wtSeriTcpDispString2 two characters each that you want the serial data stream searched for. Only if one of the two strings is found are the data from the serial port packed into network packets. If you only want to look for one character, set wtSeriTcpDispString2 to 0. If for example you configure wtSeriTcpDispString1 to 3100h and wtSeriTcpDispString2 to 0, only character 1 is searched for. Both Dispatch Strings = 0 deactivates the mode. IMPORTANT: These characters are sent to the TCP server!
What is wtSeriTcpDispString1?
Read-write 2-octet OCTET STRING; together with wtSeriTcpDispString2 it defines up to two 'dispatch' characters that the Com-Server watches for in the serial stream so it can pack data into network packets at natural message boundaries instead of splitting the stream arbitrarily -- both set to 0 disables the feature, and note these characters ARE forwarded to the TCP server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.6 snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpDispString1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.6.1 snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpDispString1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.6.1 s <value>
Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtSeriTcpDispString1 OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1 | wtComServerIntern | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1 | wtConfiguration | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3 | wtSeriPortSetup | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5 | wtSeriTcpClientTable | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1 | wtSeriTcpClientEntry | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.5.1.6 | wtSeriTcpDispString1 | Com-Server-Intern-MIB |