Com-Server-Intern-MIB :: wtSeriTcpCAddress

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Com-Server-Intern-MIB › wtSeriTcpCAddress

wtSeriTcpCAddress

Module: Com-Server-Intern-MIB

OID (symbolic): Com-Server-Intern-MIB::wtSeriTcpCAddress

OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.5.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Activating this switch activates TCP client mode for changing TCP servers. The address of the TCP server does not have to be permanently configured, but rather is sent on the serial interface before the user data as an ASCII string. The string for the addressing is not sent. There are two possibilities for string format: 1. The parameters 'wtSeriTcpServerPort' and 'wtSeriTcpServerIp' are equal to zero. Format: C IP address, Port number (e.g. 'C172.16.231.101,4800') C URL, Port number (e.g. 'Cworkpc.homeip.net,4800') 2. The parameter 'wtSeriTcpServerPort' contains the Default Port (e.g., 4800), 'wtSeriTcpServerIP' contains the first three bytes of the IP address (e.g., 172.16.231.0) Format: C4.byte IP address (e.g., 'C101') The string is not allowed to contain any spaces!

What is wtSeriTcpCAddress?

Read-write INTEGER switch enabling 'changing address' TCP client mode, where the destination server's address/port is sent as an ASCII command string (e.g. 'C172.16.231.101,4800<CR>') on the serial line ahead of the actual data rather than being fixed in wtSeriTcpServerIp/Port, letting an admin's serial equipment redirect the Com-Server to a different server on the fly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.8
snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpCAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.8.1
snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtSeriTcpCAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.5.1.8.1 i <value>

Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtSeriTcpCAddress OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5040wutCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1wtComServerCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1wtComServerInternCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1wtConfigurationCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3wtSeriPortSetupCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.5wtSeriTcpClientTableCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.5.1wtSeriTcpClientEntryCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.1.3.5.1.8wtSeriTcpCAddressCom-Server-Intern-MIB