All MIBs › Com-Server-Intern-MIB › wtSeriNetPckDelay
wtSeriNetPckDelay
Module: Com-Server-Intern-MIB
OID (symbolic): Com-Server-Intern-MIB::wtSeriNetPckDelay
OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.4.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value indicates the minimum wait time in 10ms ticks of the Com-Server after the arrival of serial data. After this time has expired, it packs the data into a network packet and sends them to the respective communication partner. Default setting 0 means an attempt is made to send the data as quickly as possible. The resulting high time transparency comes with the drawback of a higher number of network packets. If the serial transmission is done in predictable block sizes, adjusting this value will optimize the network load. In addition, there is the advantage that the serial blocks are sent within a network packet and thus reach the recipient at the same time. Please refer also to the Com-Server manual.
What is wtSeriNetPckDelay?
Read-write INTEGER (0-65535, in 10ms ticks) setting how long the Com-Server waits after serial data arrives before packing it into a network packet; the default of 0 sends data as fast as possible at the cost of more, smaller packets, while raising it lets an admin batch predictable serial blocks into single network packets to cut network overhead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.4.1.10 snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtSeriNetPckDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.4.1.10.1 snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtSeriNetPckDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.4.1.10.1 i <value>
Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtSeriNetPckDelay OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1 | wtComServerIntern | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1 | wtConfiguration | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3 | wtSeriPortSetup | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.4 | wtSeriPortTable | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1 | wtSeriPortEntry | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.4.1.10 | wtSeriNetPckDelay | Com-Server-Intern-MIB |