All MIBs › Com-Server-Intern-MIB › wtHsLines
wtHsLines
Module: Com-Server-Intern-MIB
OID (symbolic): Com-Server-Intern-MIB::wtHsLines
OID (numeric): 1.3.6.1.4.1.5040.1.1.1.3.3.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: These two octets are interpreted bit-by-bit and describe individual values
for configuring the handshake procedure. Bit 0 corresponds to the LSB.
Octet Bit Name Description
---- ---- ------------ ------------------------
1 0,1,6,7 not used
2 inxfilter 1: enable xon/xoff filter while receiving
3 outxfilter 1: enable xon/xoff filter while sending
4 rts-default 1: while RTS is not used, RTS is active
5 dtr-default 1: while DTR is not used, DTR is active
2 0 rts-disable 1: RTS will not change at LOCK/UNLOCK
1 dtr-disable 1: DTR will not change at LOCK/UNLOCK
2 outx 1: enable software handshake while sending
3 inx 1: enable software handshake while receiving
4 outx-cts 1: enable hardware handshake on CTS
5 outx-dsr 1: enable hardware handshake on DSR
6 inx-dtr 1: enable hardware handshake on DTR
7 inx-rts 1: enable hardware handshake on RTS
Standard default settings:
OCTET 1 OCTET 2 Function
-------- -------- ----------------
30h 03h No Handshake
00h 91h Hardware Handshake
3Ch 0Fh Software Handshake (Send/Receive Filter ON)What is wtHsLines?
Read-write 2-octet OCTET STRING whose 16 bits individually enable/disable RTS/DTR defaults and hardware/software (XON/XOFF) handshake behavior on the serial port; the vendor documents standard byte pairs for no handshake (30h/03h), hardware handshake (00h/91h), and software handshake (3Ch/0Fh), which an admin can use as ready-made presets instead of computing the bitmask by hand.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.3.1.5 snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtHsLines
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.1.3.3.1.5.1 snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtHsLines.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.1.3.3.1.5.1 s <value>
Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtHsLines OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1 | wtComServerIntern | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1 | wtConfiguration | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3 | wtSeriPortSetup | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.3 | wtSeriUartTable | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1 | wtSeriUartEntry | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.1.1.3.3.1.5 | wtHsLines | Com-Server-Intern-MIB |