Com-Server-Intern-MIB :: wtDeaDrvTrapInputMask

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Com-Server-Intern-MIB › wtDeaDrvTrapInputMask

wtDeaDrvTrapInputMask

Module: Com-Server-Intern-MIB

OID (symbolic): Com-Server-Intern-MIB::wtDeaDrvTrapInputMask

OID (numeric): 1.3.6.1.4.1.5040.1.1.2.1.1.5

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: Here the inputs to be polled by the card driver are configured. When a level change occurs on one or more inputs, an SNMP trap is sent to the configured SNMP Manager with the variable wtDeaDrvInputRegister (see TRAP-DEFINITIONS). The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1, Bit 4-7: unused Bit 0-3: Digital inputs 8-11 OCTET 2, Bit 0-7: Digital inputs 0-7 This setting is no longer valid after a Com-Server restart. If you want the setting to be permanent, configure the variable wtDeaSnmpInputMask in the list wtDeaSnmpAgentTable.

What is wtDeaDrvTrapInputMask?

Read-write 2-octet OCTET STRING selecting which digital inputs, when they change level, cause the Com-Server to send an SNMP trap carrying wtDeaDrvInputRegister; the vendor notes this setting does not survive a restart and that wtDeaSnmpInputMask should be used instead for a persistent equivalent.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.2.1.1.5
snmpwalk -v2c -c public <target> Com-Server-Intern-MIB::wtDeaDrvTrapInputMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.1.2.1.1.5.1
snmpget -v2c -c public <target> Com-Server-Intern-MIB::wtDeaDrvTrapInputMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.1.2.1.1.5.1 s <value>

Start monitoring W&T Com-Server serial-to-Ethernet terminal server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Com-Server-Intern-MIB::wtDeaDrvTrapInputMask OID value, configure state conditions and alerts, and monitor any W&T Com-Server serial-to-Ethernet terminal server from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5040wutCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1wtComServerCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1wtComServerInternCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.2wtDeaDriverCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.2.1wtDeaDrvTableCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.2.1.1wtDeaDrvEntryCom-Server-Intern-MIB
1.3.6.1.4.1.5040.1.1.2.1.1.5wtDeaDrvTrapInputMaskCom-Server-Intern-MIB