All MIBs › Cisco90Series-MIB › frxTestType
frxTestType
Module: Cisco90Series-MIB
OID (symbolic): Cisco90Series-MIB::frxTestType
OID (numeric): 1.3.6.1.4.1.1570.1.6.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter indicates the type of test to perform. It has no effect until frxStartTest is set to start the test. 1=Set up a loopback and run a PN-2047 Bit Error Rate Test. 2=Run a (straightaway) PN-2047 Bit Error Rate Test. This test assumes a loopback has been manually set up somewhere downstream or another test set running PN-2047 BERT is connected downstream. 3=Send corrupted CRC on the DSL. This has no effect on the frame relay CRC, only the out-of-band DSL CRC (used for performance monitoring) is corrupted. 4=Set up a loopback at the specified location to loop the frame relay or PPP data in both directions. 5=Setup a local loopback on all 4 ports. frxTestPort and frxLoopLoc are ignored for this test.
What is frxTestType?
Selects which kind of diagnostic test to run on frxTestPort once frxStartTest is set - a combined loopback+BERT, a standalone BERT, an out-of-band corrupt-CRC injection, a plain loopback, or a local loopback on all 4 ports at once; an admin picks this before starting a circuit test to isolate a suspected DSL fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1570.1.6.3.1.2 snmpwalk -v2c -c public <target> Cisco90Series-MIB::frxTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1570.1.6.3.1.2.1 snmpget -v2c -c public <target> Cisco90Series-MIB::frxTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1570.1.6.3.1.2.1 i <value>
Start monitoring Cisco 90 series router/access server (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Cisco90Series-MIB::frxTestType OID value, configure state conditions and alerts, and monitor any Cisco 90 series router/access server (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1570 | ciscoTelesend | Cisco90Series-MIB |
| 1.3.6.1.4.1.1570.1 | frMux | Cisco90Series-MIB |
| 1.3.6.1.4.1.1570.1.6 | frxPort | Cisco90Series-MIB |
| 1.3.6.1.4.1.1570.1.6.3 | frxUEocTable | Cisco90Series-MIB |
| 1.3.6.1.4.1.1570.1.6.3.1 | frxUEocEntry | Cisco90Series-MIB |
| 1.3.6.1.4.1.1570.1.6.3.1.2 | frxTestType | Cisco90Series-MIB |