All MIBs › Cisco90Series-MIB › frxDCktBe

frxDCktBe

OID (symbolic): Cisco90Series-MIB::frxDCktBe

OID (numeric): 1.3.6.1.4.1.1570.1.2.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: System Default for frxCktBe - used when the Download Configuration pushbutton on the channel unit faceplate is pushed and when frxDefaultEnable is set to 1. This is the excess BurstSize (Be) in bits. The time interval over which the excess burst is measured is Be/CIR. (Typical value 1536000).

What is frxDCktBe?

Default excess burst size (Be), in bits, loaded onto a circuit via Download Configuration; typical factory value is 1536000, controlling how much traffic above CIR the circuit tolerates as discard-eligible before it's dropped.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1570.1.2.13
snmpwalk -v2c -c public <target> Cisco90Series-MIB::frxDCktBe

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1570.1.2.13.1
snmpget -v2c -c public <target> Cisco90Series-MIB::frxDCktBe.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1570.1.2.13.1 i <value>

Start monitoring Cisco 90 series router/access server (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Cisco90Series-MIB::frxDCktBe OID value, configure state conditions and alerts, and monitor any Cisco 90 series router/access server (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.1570	ciscoTelesend	Cisco90Series-MIB
1.3.6.1.4.1.1570.1	frMux	Cisco90Series-MIB
1.3.6.1.4.1.1570.1.2	frxDefault	Cisco90Series-MIB
1.3.6.1.4.1.1570.1.2.13	frxDCktBe	Cisco90Series-MIB

Cisco90Series-MIB :: frxDCktBe

frxDCktBe

Module

This MIB depends on