All MIBs › Cip-MIB
Organization: CommWorks Corporation, a 3Com Company
Last Updated: 2002-08-01
Category: CommWorks / 3Com Broadband
Description: Defines SNMP objects for managing IP-over-cable (CIP) interfaces on CommWorks (3Com) broadband access devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Cip-MIB?
Cip-MIB is a CommWorks (3Com) vendor-specific MIB that manages IP-over-cable-style dial/serial access interfaces (CIP, an acronym for the vendor's serial/modem port access architecture) on broadband access devices. Its usrCipPortParamTable (indexed by usrCipPortIndex) is the central configuration table, exposing usrCipPortType, usrCipPortAccess, usrCipPortState, usrCipPortIpAddress, and usrCipPortNumConns for each serial interface, while related tables cover modem groups (usrCipModemGroupTable, usrCipModemPortParamTable), login handling (usrCipPortLoginTable, usrCipModemLoginTable), and chat scripts (usrCipChatScriptTable). Operational statistics are tracked in usrCipCallStatisticsTable, usrCipCallDurationStatisticsTable, usrCipModemUtilizationStatisticsTable, usrCipSpeedStatisticsTable, and usrCipPPPCompressionStatisticsTable, giving visibility into call volume, duration, modem utilization, and PPP link performance, alongside usrSlotUtilizationTable for chassis-level slot capacity. It depends on USR-DEFINITIONS-MIB for its common textual conventions and enterprise OID root and is deployed on CommWorks/3Com Total Control-style broadband access chassis, where an administrator running Cip-MIB SNMP monitoring watches port and modem-level call statistics.
IPNetwork Monitor allows you to monitor SNMP objects defined in Cip-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- CommWorks (3Com) Total Control-style broadband/dial access chassis
Monitoring Examples
An operator polls usrCipPortParamTable for usrCipPortState and usrCipPortNumConns on a given serial port, then checks usrCipCallStatisticsTable and usrCipModemUtilizationStatisticsTable to see call volume and modem usage trends; a port showing usrCipPortState as down alongside a spike in call failures across usrCipCallStatisticsTable would indicate a hardware or line problem on that access port.
What Can Be Monitored
- per-port CIP configuration and state table
- modem group and modem port parameter tables
- call statistics (volume/duration)
- modem utilization statistics
- PPP compression statistics
- chassis slot utilization
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| DisplayString |
From USR-DEFINITIONS-MIB
| UsrLongString | |
| common | OBJECT-IDENTITY |
How to Use in IPNetwork Monitor
Example using usrCipGlblNumCalls OID:
Select a CommWorks (3Com) Total Control-style broadband/dial access chassis as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usrCipGlblNumCalls into the Find box to locate it in the OID tree, then select it and click OK. The total number of calls received since the boot up time. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| usrCip | 1.3.6.1.4.1.429.4.10 | The commWorks enterprise defined MIB objects for CIP | ||
| usrCipPortParamTable | 1.3.6.1.4.1.429.4.10.1 | not-accessible | This table contains the serial port parameters. | |
| usrCipPortParamEntry | 1.3.6.1.4.1.429.4.10.1.1 | not-accessible | Each entry corresponds to a serial interface. | |
| I32 usrCipPortIndex | 1.3.6.1.4.1.429.4.10.1.1.1 | Integer32 | not-accessible | The identifier of the physical interface. |
| INT usrCipPortType | 1.3.6.1.4.1.429.4.10.1.1.2 | INTEGER | read-write | The type of the physical port. |
| INT usrCipPortAccess | 1.3.6.1.4.1.429.4.10.1.1.3 | INTEGER | read-write | This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports. |
| INT usrCipPortHostType | 1.3.6.1.4.1.429.4.10.1.1.4 | INTEGER | read-write | The host type that the dial-in user will be connected to. |
| INT usrCipPortLoginService | 1.3.6.1.4.1.429.4.10.1.1.5 | INTEGER | read-write | The Service type that the dial-in user will be connected to. |
| I32 usrCipPortTcpPortNumber | 1.3.6.1.4.1.429.4.10.1.1.6 | Integer32 | read-write | The tcp port number associated with the service type. |
| OCT usrCipPortLoginMsg | 1.3.6.1.4.1.429.4.10.1.1.7 | OCTET STRING | read-write | The salutation message associated with a specific port. |
| OCT usrCipPortLoginPrompt | 1.3.6.1.4.1.429.4.10.1.1.8 | OCTET STRING | read-write | The login prompt associated with a specific port. |
| IP usrCipPortIpAddress | 1.3.6.1.4.1.429.4.10.1.1.9 | IpAddress | read-write | The IP address for a specific serial port. |
| IP usrCipPortHostIpAddress | 1.3.6.1.4.1.429.4.10.1.1.10 | IpAddress | read-write | A host IP address specified for this interface. |
| I32 usrCipPortNetMask | 1.3.6.1.4.1.429.4.10.1.1.11 | Integer32 | read-write | The netmask associated with a specific serial interface. |
| INT usrCipPortProtocol | 1.3.6.1.4.1.429.4.10.1.1.12 | INTEGER | read-write | The protocol type configured for a specific interface. |
| I32 usrCipPortMtu | 1.3.6.1.4.1.429.4.10.1.1.13 | Integer32 | read-write | The mtu value associated with a specific interface. |
| I32 usrCipPortIdleTimeOut | 1.3.6.1.4.1.429.4.10.1.1.14 | Integer32 | read-write | The maximum idle time specified for an interface. |
| INT usrCipPortState | 1.3.6.1.4.1.429.4.10.1.1.15 | INTEGER | read-only | The state of the serial line. |
| C32 usrCipPortNumConns | 1.3.6.1.4.1.429.4.10.1.1.16 | Counter32 | read-only | The total number of connections made on this if. |
| INT usrCipPortConnType | 1.3.6.1.4.1.429.4.10.1.1.17 | INTEGER | read-only | The connection type on this interface. |
| OCT usrCipUserName | 1.3.6.1.4.1.429.4.10.1.1.18 | OCTET STRING | read-only | The name user connected to this interface. |
| I32 usrCipConnStartTime | 1.3.6.1.4.1.429.4.10.1.1.19 | Integer32 | read-only | The start time of a connection specified on an interface. |
| INT usrCipDataLinkConn | 1.3.6.1.4.1.429.4.10.1.1.20 | INTEGER | read-only | The data link layer that a specific dial-in session is connected to. |
| STR usrCipInitScriptName | 1.3.6.1.4.1.429.4.10.1.1.21 | DisplayString | read-write | The name of the script |
| INT usrCipIfConnType | 1.3.6.1.4.1.429.4.10.1.1.22 | INTEGER | read-write | The type of the connection that i/f is configured for. |
| OCT usrCipPromptUserName | 1.3.6.1.4.1.429.4.10.1.1.23 | OCTET STRING | read-write | This could only be set if the port is configured not to prompt for username. |
| OCT usrCipUserPasswd | 1.3.6.1.4.1.429.4.10.1.1.24 | OCTET STRING | read-write | This could only be set if the port is configured to not prompt for password. |
| OCT usrCipPortIfName | 1.3.6.1.4.1.429.4.10.1.1.25 | OCTET STRING | read-only | The name of the serial line interface. |
| OCT usrCipPortDialPrefix | 1.3.6.1.4.1.429.4.10.1.1.26 | OCTET STRING | read-write | This string defines the prefix to the phone number. |
| STR usrCipPortCfgScript | 1.3.6.1.4.1.429.4.10.1.1.27 | DisplayString | read-write | This string defines an I-modem or V.34 AT command a value of RESET will cause the modem to be reset and reinitialized with the string found in usrInitScriptCommands. A value of zero indicates no command exists. It cannot be SET to NULL. |
| STR usrCipPortCfgScriptResult | 1.3.6.1.4.1.429.4.10.1.1.28 | UsrLongString | read-only | This string defines the result of the AT command. NVT ASCII characters. |
| INT usrCipPortPromptingStyle | 1.3.6.1.4.1.429.4.10.1.1.29 | INTEGER | read-write | This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server. |
| INT usrCipPortLoginProcessing | 1.3.6.1.4.1.429.4.10.1.1.30 | INTEGER | read-write | This variable controls login processing. This value can be set for controlling user authentication for different types of autodetected PPP calls. Default is authentication is done for all types of PPP calls.. |
| OCT usrCipPortDomainName | 1.3.6.1.4.1.429.4.10.1.1.31 | OCTET STRING | read-write | The Domain Name associated with this port |
| OCT usrCipPortDelimiter | 1.3.6.1.4.1.429.4.10.1.1.32 | OCTET STRING | read-write | The delimiter string port domain configuration |
| INT usrCipPortCallType | 1.3.6.1.4.1.429.4.10.1.1.33 | INTEGER | read-write | This variable call type associated with the interface. |
| INT usrCipPortDNISAuthentication | 1.3.6.1.4.1.429.4.10.1.1.34 | INTEGER | read-write | DNIS Authentication type |
| INT usrCipPortDNISAuthTime | 1.3.6.1.4.1.429.4.10.1.1.35 | INTEGER | read-write | DNIS Authentication Time |
| INT usrCipPortDNISAuthType | 1.3.6.1.4.1.429.4.10.1.1.36 | INTEGER | read-write | DNIS Authentication type |
| OCT usrCipPortDNISPassword | 1.3.6.1.4.1.429.4.10.1.1.37 | OCTET STRING | read-write | The DNIS password. |
| I32 usrCipPortDNISTimeout | 1.3.6.1.4.1.429.4.10.1.1.38 | Integer32 | read-write | Timeout if no auth within this time |
| INT usrCipPortParity | 1.3.6.1.4.1.429.4.10.1.1.39 | INTEGER | read-write | Port Parity |
| I32 usrCipPromptDelay | 1.3.6.1.4.1.429.4.10.1.1.40 | Integer32 | read-write | If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay |
| I32 usrCipPromptTimeout | 1.3.6.1.4.1.429.4.10.1.1.41 | Integer32 | read-write | This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs |
| INT usrCipSpecialXonXoffFlow | 1.3.6.1.4.1.429.4.10.1.1.42 | INTEGER | read-write | Special Xon Xoff flow control in modem control receive side |
| OCT usrCipCallingPhoneNumber | 1.3.6.1.4.1.429.4.10.1.1.43 | OCTET STRING | read-only | Calling phone number |
| OCT usrCipCalledPhoneNumber | 1.3.6.1.4.1.429.4.10.1.1.44 | OCTET STRING | read-only | Called phone number |
| I32 usrCipPortGlobalConnId | 1.3.6.1.4.1.429.4.10.1.1.45 | Integer32 | read-only | Global Connection Id |
| INT usrCipPortUseDnisPool | 1.3.6.1.4.1.429.4.10.1.1.46 | INTEGER | read-write | User DNIS pool |
| OCT usrCipPortLoginTable | 1.3.6.1.4.1.429.4.10.1.1.47 | OCTET STRING | read-write | Login Host Table |
| INT usrCipPortMobileType | 1.3.6.1.4.1.429.4.10.1.1.48 | INTEGER | read-only | The Mobile Node connected |
| usrCipModemGroupTable | 1.3.6.1.4.1.429.4.10.2 | not-accessible | This table contains the serial port parameters. | |
| usrCipModemGroupEntry | 1.3.6.1.4.1.429.4.10.2.1 | not-accessible | Each entry corresponds to a serial interface. All objects required for row creation. | |
| STR usrCipModemGroupName | 1.3.6.1.4.1.429.4.10.2.1.1 | DisplayString | not-accessible | The identifier of a modem group. |
| INT usrCipModemGroupStatus | 1.3.6.1.4.1.429.4.10.2.1.2 | INTEGER | read-write | The status could be add or delete the group member specified in the usrCipGroupMembers MIB. |
| I32 usrCipModemGroupCount | 1.3.6.1.4.1.429.4.10.2.1.3 | Integer32 | read-only | The number of modem ports in a specific group. |
| usrCipGlblHostTable | 1.3.6.1.4.1.429.4.10.3 | not-accessible | This table contains the global host addresses. | |
| usrCipGlblHostEntry | 1.3.6.1.4.1.429.4.10.3.1 | not-accessible | Each entry contains a host address with tcp port numbers. | |
| I32 usrCipGlblHostIndex | 1.3.6.1.4.1.429.4.10.3.1.1 | Integer32 | read-write | The identifier of a default host table. |
| IP usrCipGlblHostAddress | 1.3.6.1.4.1.429.4.10.3.1.2 | IpAddress | read-write | The global host IP address. |
| I32 usrCipGlblHostRloginPort | 1.3.6.1.4.1.429.4.10.3.1.3 | Integer32 | read-write | The host rlogin tcp port number. |
| I32 usrCipGlblHostTelnetPort | 1.3.6.1.4.1.429.4.10.3.1.4 | Integer32 | read-write | The host telnet port number. |
| I32 usrCipGlblHostTcpClearPort | 1.3.6.1.4.1.429.4.10.3.1.5 | Integer32 | read-write | The host tcp clear port number. |
| OCT usrCipGlblHostName | 1.3.6.1.4.1.429.4.10.3.1.6 | OCTET STRING | read-write | The global host name. |
| INT usrCipGlblHostState | 1.3.6.1.4.1.429.4.10.3.1.7 | INTEGER | read-write | The state of a default host entry. |
| INT usrCipGlblHostSelectionMethod | 1.3.6.1.4.1.429.4.10.4 | INTEGER | read-write | The method that will be used to select the default host. |
| INT usrCipGlblHostType | 1.3.6.1.4.1.429.4.10.5 | INTEGER | read-write | The default host type. |
| OCT usrCipGlblLoginMsg | 1.3.6.1.4.1.429.4.10.6 | OCTET STRING | read-write | The user login message |
| OCT usrCipGlblUsrCommandPrompt | 1.3.6.1.4.1.429.4.10.7 | OCTET STRING | read-write | The user command prompt. |
| OCT usrCipGlblLogNetUserPrompt | 1.3.6.1.4.1.429.4.10.8 | OCTET STRING | read-write | The login/network command prompt. |
| OCT usrCipGlblMgPrompt | 1.3.6.1.4.1.429.4.10.9 | OCTET STRING | read-write | The manage prompt. |
| OCT usrCipGlblUserName | 1.3.6.1.4.1.429.4.10.10 | OCTET STRING | read-write | The default user name used in case the dial-in users don't get prompted for the user name and no user name is configured for the i/f. |
| C32 usrCipGlblNumCallsEx | 1.3.6.1.4.1.429.4.10.11 | Counter32 | read-only | The total number of calls received since the boot up time. |
| INT usrCipAllowManageOnDialups | 1.3.6.1.4.1.429.4.10.12 | INTEGER | read-write | This variable turns on/off the ability to manage the system through the dialup ports. |
| I32 usrCipHangUp | 1.3.6.1.4.1.429.4.10.13 | Integer32 | read-write | This variable is set only if a hangup message is sent out. The value of this variable is the interface index. |
| OCT usrCipDialOut | 1.3.6.1.4.1.429.4.10.14 | OCTET STRING | read-write | This variable is set through the CLI when the user manually issues a dial-out. |
| I32 usrCipBusyOut | 1.3.6.1.4.1.429.4.10.15 | Integer32 | read-write | This variable is set only in case the user wants to take the phone off hook. |
| usrInitScriptTable | 1.3.6.1.4.1.429.4.10.16 | not-accessible | This table contains the global host addresses. | |
| usrInitScriptEntry | 1.3.6.1.4.1.429.4.10.16.1 | not-accessible | Each entry contains a host address with tcp port numbers. | |
| STR usrInitScriptName | 1.3.6.1.4.1.429.4.10.16.1.1 | DisplayString | not-accessible | The name of the script |
| STR usrInitScriptCommands | 1.3.6.1.4.1.429.4.10.16.1.2 | DisplayString | read-write | The AT commands that will be sent to the serial line driver every time a connection goes away. |
| INT usrInitScriptStatus | 1.3.6.1.4.1.429.4.10.16.1.3 | INTEGER | read-write | This variable is used to delete a script from the init script list. |
| usrCipCfmPortIndexTable | 1.3.6.1.4.1.429.4.10.17 | not-accessible | This table contains CIP port indices. It is defined so that CFM process would be able to save a specific row of portal table. | |
| usrCipCfmPortIndexEntry | 1.3.6.1.4.1.429.4.10.17.1 | not-accessible | Each entry corresponds to a serial interface. | |
| I32 usrCipCfmPortIndex | 1.3.6.1.4.1.429.4.10.17.1.1 | Integer32 | read-only | The identifier of the physical interface. |
| I32 usrCipCfmPortFlag | 1.3.6.1.4.1.429.4.10.17.1.2 | Integer32 | read-write | The flag that triggers a cfm operation on each interface. |
| I32 usrCipCfmAllPortsFlag | 1.3.6.1.4.1.429.4.10.18 | Integer32 | read-write | This flag triggers a CFM action. |
| I32 usrCipCfmModemGroupFlag | 1.3.6.1.4.1.429.4.10.19 | Integer32 | read-write | This flag triggers a save of modem group table. |
| I32 usrCipCfmGlblHostTableFlag | 1.3.6.1.4.1.429.4.10.20 | Integer32 | read-write | This flag triggers a save of global host table. |
| I32 usrCipCfmInitScriptFlag | 1.3.6.1.4.1.429.4.10.21 | Integer32 | read-write | This flag triggers a save of init script table. |
| I32 usrCipCfmGlblVarFlag | 1.3.6.1.4.1.429.4.10.22 | Integer32 | read-write | This flag triggers a save of global variables. |
| I32 usrCipCfmSaveAllFlag | 1.3.6.1.4.1.429.4.10.23 | Integer32 | read-write | This flag triggers a save for all of CIP tables. |
| usrCipModemPortParamTable | 1.3.6.1.4.1.429.4.10.24 | not-accessible | This table contains the serial port parameters. | |
| usrCipModemPortParamEntry | 1.3.6.1.4.1.429.4.10.24.1 | not-accessible | Each entry corresponds to a serial interface. | |
| OCT usrCipModemPortName | 1.3.6.1.4.1.429.4.10.24.1.1 | OCTET STRING | not-accessible | The identifier of a modem group. |
| INT usrCipModemPortType | 1.3.6.1.4.1.429.4.10.24.1.2 | INTEGER | read-write | The type of the physical port. |
| INT usrCipModemPortAccess | 1.3.6.1.4.1.429.4.10.24.1.3 | INTEGER | read-write | This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports. |
| INT usrCipModemPortHostType | 1.3.6.1.4.1.429.4.10.24.1.4 | INTEGER | read-write | The host type that the dial-in user will be connected to. |
| INT usrCipModemPortLoginService | 1.3.6.1.4.1.429.4.10.24.1.5 | INTEGER | read-write | The Service type that the dial-in user will be connected to. |
| I32 usrCipModemPortTcpPortNumber | 1.3.6.1.4.1.429.4.10.24.1.6 | Integer32 | read-write | The tcp port number associated with the service type. |
| OCT usrCipModemPortLoginMsg | 1.3.6.1.4.1.429.4.10.24.1.7 | OCTET STRING | read-write | The salutation message associated with a specific port. |
| OCT usrCipModemPortLoginPrompt | 1.3.6.1.4.1.429.4.10.24.1.8 | OCTET STRING | read-write | The login prompt associated with a specific port. |
| IP usrCipModemPortIpAddress | 1.3.6.1.4.1.429.4.10.24.1.9 | IpAddress | read-write | The IP address for a specific serial port. |
| IP usrCipModemPortHostIpAddress | 1.3.6.1.4.1.429.4.10.24.1.10 | IpAddress | read-write | A host IP address specified for this interface. |
| I32 usrCipModemPortNetMask | 1.3.6.1.4.1.429.4.10.24.1.11 | Integer32 | read-write | The netmask associated with a specific serial interface. |
| INT usrCipModemPortProtocol | 1.3.6.1.4.1.429.4.10.24.1.12 | INTEGER | read-write | The protocol type configured for a specific interface. |
| I32 usrCipModemPortMtu | 1.3.6.1.4.1.429.4.10.24.1.13 | Integer32 | read-write | The mtu value associated with a specific interface. |
| I32 usrCipModemPortIdleTimeOut | 1.3.6.1.4.1.429.4.10.24.1.14 | Integer32 | read-write | The maximum idle time specified for an interface. |
| STR usrCipModemInitScriptName | 1.3.6.1.4.1.429.4.10.24.1.15 | DisplayString | read-write | The name of the script |
| INT usrCipModemIfConnType | 1.3.6.1.4.1.429.4.10.24.1.16 | INTEGER | read-write | The type of the connection that i/f is configured for. |
| OCT usrCipModemPromptUserName | 1.3.6.1.4.1.429.4.10.24.1.17 | OCTET STRING | read-write | This could only be set if the port is configured not to prompt for username. |
| OCT usrCipModemUserPasswd | 1.3.6.1.4.1.429.4.10.24.1.18 | OCTET STRING | read-write | This could only be set if the port is configured to not prompt for password. |
| OCT usrCipModemDialPrefix | 1.3.6.1.4.1.429.4.10.24.1.19 | OCTET STRING | read-write | This string defines the prefix to the phone number. |
| INT usrCipModemPortPromptingStyle | 1.3.6.1.4.1.429.4.10.24.1.20 | INTEGER | read-write | This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server. |
| INT usrCipModemPortLoginProcessing | 1.3.6.1.4.1.429.4.10.24.1.21 | INTEGER | read-write | This variable controls login processing. Setting the value to disable will cause the box to not prompt a user for login name or password. Enabling this value will cause the box to perform normal login name and password prompting. |
| INT usrCipModemPortDNISAuthentication | 1.3.6.1.4.1.429.4.10.24.1.22 | INTEGER | read-write | DNIS Authentication type |
| INT usrCipModemPortDNISAuthTime | 1.3.6.1.4.1.429.4.10.24.1.23 | INTEGER | read-write | DNIS Authentication Time |
| INT usrCipModemPortDNISAuthType | 1.3.6.1.4.1.429.4.10.24.1.24 | INTEGER | read-write | DNIS Authentication type |
| OCT usrCipModemPortDNISPassword | 1.3.6.1.4.1.429.4.10.24.1.25 | OCTET STRING | read-write | The DNIS password. |
| I32 usrCipModemPortDNISTimeout | 1.3.6.1.4.1.429.4.10.24.1.26 | Integer32 | read-write | Timeout if no auth within this time |
| INT usrCipModemPortParity | 1.3.6.1.4.1.429.4.10.24.1.27 | INTEGER | read-write | Port Parity |
| I32 usrCipModemPromptDelay | 1.3.6.1.4.1.429.4.10.24.1.28 | Integer32 | read-write | If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay |
| I32 usrCipModemPromptTimeout | 1.3.6.1.4.1.429.4.10.24.1.29 | Integer32 | read-write | This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs |
| INT usrCipModemSpecialXonXoffFlow | 1.3.6.1.4.1.429.4.10.24.1.30 | INTEGER | read-write | Special Xon Xoff flow control in modem control receive side |
| INT usrCipModemUseDnisPool | 1.3.6.1.4.1.429.4.10.24.1.31 | INTEGER | read-write | User DNIS pool |
| OCT usrCipModemLoginTable | 1.3.6.1.4.1.429.4.10.24.1.32 | OCTET STRING | read-write | Login Host Table |
| OCT usrCipConfigFileName | 1.3.6.1.4.1.429.4.10.25 | OCTET STRING | read-only | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the default name `@file://CallInitProcess.cfg' is used. |
| usrCipModemGroupInterfaceTable | 1.3.6.1.4.1.429.4.10.26 | not-accessible | This table contains the list of interfaces that belong to a particular modem group. | |
| usrCipModemGroupInterfaceEntry | 1.3.6.1.4.1.429.4.10.26.1 | not-accessible | Each entry corresponds to a serial interface. | |
| STR usrCipModemGroupInterfaceGroupName | 1.3.6.1.4.1.429.4.10.26.1.1 | DisplayString | not-accessible | Group name that this interface belongs to. |
| STR usrCipModemGroupInterfaceName | 1.3.6.1.4.1.429.4.10.26.1.2 | DisplayString | not-accessible | The identifier of a modem group. |
| INT usrCipModemGroupInterfaceStatus | 1.3.6.1.4.1.429.4.10.26.1.3 | INTEGER | read-write | The status could be add or delete the group member specified in the usrCipGroupMembers MIB. |
| INT usrCipGlobalCallType | 1.3.6.1.4.1.429.4.10.27 | INTEGER | read-write | Global Call Type determiner . |
| INT usrCipSingleLevelPrompting | 1.3.6.1.4.1.429.4.10.28 | INTEGER | read-write | If enabled, Login/Network users are presented with the HiPer prompt, by-passing the initial Login/Network prompt (def: disabled). |
| I32 usrCipCfmChatScriptFlag | 1.3.6.1.4.1.429.4.10.29 | Integer32 | read-write | This flag triggers a save of chat script table. |
| usrCipChatScriptTable | 1.3.6.1.4.1.429.4.10.30 | not-accessible | This table contains the chatscript names. | |
| usrCIPChatScriptEntry | 1.3.6.1.4.1.429.4.10.30.1 | not-accessible | Each entry corresponds to a chat script. | |
| OCT usrCipChatScriptName | 1.3.6.1.4.1.429.4.10.30.1.1 | OCTET STRING | not-accessible | The character name for this chatscript. |
| INT usrCipChatScriptStatus | 1.3.6.1.4.1.429.4.10.30.1.2 | INTEGER | read-write | The status of this chatscript entry. Valid row entries in this table have the status field set to normal. The settable values are normal and delete. If the instance is in the table and the status is starting/reading, this will be an add operation. |
| OCT usrCipChatScriptString | 1.3.6.1.4.1.429.4.10.30.1.3 | OCTET STRING | read-only | Chat script buffer |
| INT usrCipDNISAuthFlag | 1.3.6.1.4.1.429.4.10.31 | INTEGER | read-write | This is the switch to enable/disable DNIS based call-authorization |
| OCT usrCipDNISAuthPassword | 1.3.6.1.4.1.429.4.10.32 | OCTET STRING | read-write | This is the Password for the DNIS authorization request being sent out |
| OCT usrCipBannerFileName | 1.3.6.1.4.1.429.4.10.33 | OCTET STRING | read-write | This is file name for port banner file, value zero if none. |
| INT usrCipAutoAnswerFlag | 1.3.6.1.4.1.429.4.10.34 | INTEGER | read-write | This is the switch to enable/disable the Auto Answering of Modem-Sharing-Dialout Calls |
| usrSlotUtilizationTable | 1.3.6.1.4.1.429.4.10.35 | not-accessible | This table contains the chatscript names. | |
| usrSlotUtilizationEntry | 1.3.6.1.4.1.429.4.10.35.1 | not-accessible | Each entry corresponds to a chat script. | |
| I32 usrSlotIndex | 1.3.6.1.4.1.429.4.10.35.1.1 | Integer32 | not-accessible | The slot index. |
| I32 usrSlotId | 1.3.6.1.4.1.429.4.10.35.1.2 | Integer32 | read-only | The slot number in human readable format where proper offset is computed. |
| I32 usrSlotActiveCalls | 1.3.6.1.4.1.429.4.10.35.1.3 | Integer32 | read-only | The number of active calls on that slot at that instant. |
| I32 usrSlotNumberOfPorts | 1.3.6.1.4.1.429.4.10.35.1.4 | Integer32 | read-only | The number of ports on that slot. |
| I32 usrSlotUtilization | 1.3.6.1.4.1.429.4.10.35.1.5 | Integer32 | read-only | The percent utilization of that slot. This is computed as number of active calls on that slot divided by the number of ports on that slot. |
| I32 usrCipTotalCalls | 1.3.6.1.4.1.429.4.10.36 | Integer32 | read-only | Total number of calls on the chassis. |
| I32 usrCipTotalAvailablePorts | 1.3.6.1.4.1.429.4.10.37 | Integer32 | read-only | Total number of ports on the chassis. |
| I32 usrCipTotalChassisUtilization | 1.3.6.1.4.1.429.4.10.38 | Integer32 | read-only | Percent utilization of all ports on the chassis. |
| I32 usrCipCallsInLast24Hours | 1.3.6.1.4.1.429.4.10.39 | Integer32 | read-only | The number of calls in last 24 hours. |
| INT usrCipDialinAccessManageUser | 1.3.6.1.4.1.429.4.10.40 | INTEGER | read-write | No Manage user dialin access |
| usrCipModemUtilizationStatisticsTable | 1.3.6.1.4.1.429.4.10.41 | not-accessible | The active calls during every hour gives 24 samples. | |
| usrCipModemUtilizationStatisticsEntry | 1.3.6.1.4.1.429.4.10.41.1 | not-accessible | CIP PPP Modem Utilizationstatistics | |
| I32 usrCipModemUtilizationStatisticsIndex | 1.3.6.1.4.1.429.4.10.41.1.1 | Integer32 | not-accessible | The index for the call duration samples. |
| C32 usrCipModemUtilization | 1.3.6.1.4.1.429.4.10.41.1.2 | Counter32 | read-only | The percentage utilization of the modems per hour. |
| C32 usrCipCallsPerHour | 1.3.6.1.4.1.429.4.10.41.1.3 | Counter32 | read-only | The number of calls per hour. |
| C32 usrCipPacketsForwadedPerHour | 1.3.6.1.4.1.429.4.10.41.1.4 | Counter32 | read-only | The number of packets forwarded per hour. |
| usrCipCallStatisticsTable | 1.3.6.1.4.1.429.4.10.42 | not-accessible | The table listing the Cip Call statistics for all the calls coming in. | |
| usrCipCallStatisticsEntry | 1.3.6.1.4.1.429.4.10.42.1 | not-accessible | CIP Call statistics | |
| I32 usrCipCallStatisticsIndex | 1.3.6.1.4.1.429.4.10.42.1.1 | Integer32 | not-accessible | The index for the call statistics display. they are 0-now, 1-max, 2-today & 3-total. |
| C32 usrCipCallStatisticsOnDemandConns | 1.3.6.1.4.1.429.4.10.42.1.2 | Counter32 | read-only | The number of On Demand connections. |
| C32 usrCipCallStatisticsContinuousConns | 1.3.6.1.4.1.429.4.10.42.1.3 | Counter32 | read-only | The number of Continuous connections. |
| C32 usrCipCallStatisticsDialBackConns | 1.3.6.1.4.1.429.4.10.42.1.4 | Counter32 | read-only | The number of Dial back connections. |
| C32 usrCipCallStatisticsManualConns | 1.3.6.1.4.1.429.4.10.42.1.5 | Counter32 | read-only | The number of manual connections. |
| C32 usrCipCallStatisticsTimedConns | 1.3.6.1.4.1.429.4.10.42.1.6 | Counter32 | read-only | The number of Timed connections. |
| C32 usrCipCallStatisticsSharedConns | 1.3.6.1.4.1.429.4.10.42.1.7 | Counter32 | read-only | The number of Shared connections. |
| C32 usrCipCallStatisticsDialInConns | 1.3.6.1.4.1.429.4.10.42.1.8 | Counter32 | read-only | The number of Dial-In connections. |
| C32 usrCipCallStatisticsBondConns | 1.3.6.1.4.1.429.4.10.42.1.9 | Counter32 | read-only | The number of Bond connections. |
| C32 usrCipCallStatisticsDedicatedConns | 1.3.6.1.4.1.429.4.10.42.1.10 | Counter32 | read-only | The number of Dedicated connections. |
| C32 usrCipCallStatisticsAnalogCalls | 1.3.6.1.4.1.429.4.10.42.1.11 | Counter32 | read-only | The number of analog calls. |
| C32 usrCipCallStatisticsIsdnCalls | 1.3.6.1.4.1.429.4.10.42.1.12 | Counter32 | read-only | The number of digital calls. |
| C32 usrCipCallStatisticsDialInUsers | 1.3.6.1.4.1.429.4.10.42.1.13 | Counter32 | read-only | The number of login users. |
| C32 usrCipCallStatisticsNetworkUsers | 1.3.6.1.4.1.429.4.10.42.1.14 | Counter32 | read-only | The number of Network users. |
| DAT usrCipCallStatisticsCounterResetTime | 1.3.6.1.4.1.429.4.10.42.1.15 | DateAndTime | read-write | Time the call statistics counters were last reset to value zero. |
| C32 usrCipCallStatisticsIs95cPppConns | 1.3.6.1.4.1.429.4.10.42.1.16 | Counter32 | read-only | Counter of IS-95C PPP Connections. |
| C32 usrCipCallStatisticsEvdoPppConns | 1.3.6.1.4.1.429.4.10.42.1.17 | Counter32 | read-only | Counter of EVDO PPP Connections. |
| usrCipCallDurationStatisticsTable | 1.3.6.1.4.1.429.4.10.43 | not-accessible | Number of calls which lasted 1, 2, 5, 10, 20, 60, 120, 360, 720, 1440, 2160 and 3600 minutes & over. This gives 12 samples. | |
| usrCipCallDurationStatisticsEntry | 1.3.6.1.4.1.429.4.10.43.1 | not-accessible | CIP Call Duration statistics | |
| I32 usrCipCallDurationStatisticsIndex | 1.3.6.1.4.1.429.4.10.43.1.1 | Integer32 | not-accessible | The index for the call duration samples. |
| C32 usrCipCallDurations | 1.3.6.1.4.1.429.4.10.43.1.2 | Counter32 | read-only | The number of calls for each samples. |
| usrCipPPPCompressionStatisticsTable | 1.3.6.1.4.1.429.4.10.44 | not-accessible | The table listing the Cip PPP Compression statistics for all the calls coming in. | |
| usrCipPPPCompressionStatisticsEntry | 1.3.6.1.4.1.429.4.10.44.1 | not-accessible | CIP PPPCompression statistics | |
| I32 usrCipPPPCompressionStatisticsIndex | 1.3.6.1.4.1.429.4.10.44.1.1 | Integer32 | not-accessible | The index for the PPPCompression statistics display. |
| C32 usrCipPPPCompressionStatisticsMicrosoftComp | 1.3.6.1.4.1.429.4.10.44.1.2 | Counter32 | read-only | The number of calls uses microsoft compression. |
| C32 usrCipPPPCompressionStatisticsAscendComp | 1.3.6.1.4.1.429.4.10.44.1.3 | Counter32 | read-only | The number of calls uses ascend compression.. |
| C32 usrCipPPPCompressionStatisticsStackComp | 1.3.6.1.4.1.429.4.10.44.1.4 | Counter32 | read-only | The number of calls uses stack compression.. |
| C32 usrCipPPPCompressionStatisticsPPPUsers | 1.3.6.1.4.1.429.4.10.44.1.5 | Counter32 | read-only | The number of PPP users.. |
| C32 usrCipPPPCompressionStatisticsPPPBundlesFormed | 1.3.6.1.4.1.429.4.10.44.1.6 | Counter32 | read-only | The number of PPP Bundles formed.. |
| C32 usrCipPPPCompressionStatisticsMrruNegotiated | 1.3.6.1.4.1.429.4.10.44.1.7 | Counter32 | read-only | The number of calls negotiated MRRU for making a multi-link.. |
| C32 usrCipPPPCompressionStatisticsIPXNegotiated | 1.3.6.1.4.1.429.4.10.44.1.8 | Counter32 | read-only | The number of calls negotiated IPX. |
| C32 usrCipPPPCompressionStatisticsIPNegotiated | 1.3.6.1.4.1.429.4.10.44.1.9 | Counter32 | read-only | The number of calls negotiated IP. |
| C32 usrCipPPPCompressionStatisticsVJCompression | 1.3.6.1.4.1.429.4.10.44.1.10 | Counter32 | read-only | The number of calls negotiated VJ Compression |
| C32 usrCipPPPCompressionStatisticsBACPNegotiated | 1.3.6.1.4.1.429.4.10.44.1.11 | Counter32 | read-only | The number of calls negotiated BAP. |
| C32 usrCipPPPCompressionStatisticsCHAPAuthenticated | 1.3.6.1.4.1.429.4.10.44.1.12 | Counter32 | read-only | The number of calls attempted authentication using CHAP. |
| C32 usrCipPPPCompressionStatisticsPAPAuthenticated | 1.3.6.1.4.1.429.4.10.44.1.13 | Counter32 | read-only | The number of calls attempted authentication using PAP. |
| C32 usrCipPPPCompressionStatisticsMSCHAPAuthenticated | 1.3.6.1.4.1.429.4.10.44.1.14 | Counter32 | read-only | The number of calls attempted authentication using MSCHAP. |
| C32 usrCipPPPCompressionStatisticsEAPAuthenticated | 1.3.6.1.4.1.429.4.10.44.1.15 | Counter32 | read-only | The number of calls attempted authentication using EAP. |
| DAT usrCipPPPCompressionStatisticsResetTime | 1.3.6.1.4.1.429.4.10.44.1.16 | DateAndTime | read-write | Time the PPP statistics counters were last reset to value zero. |
| C32 usrCipPPPCompressionStatisticsDeflateComp | 1.3.6.1.4.1.429.4.10.44.1.17 | Counter32 | read-only | The number of calls uses Deflate compression.. |
| C32 usrCipPPPStatisticsConnInitiated | 1.3.6.1.4.1.429.4.10.44.1.18 | Counter32 | read-only | The number of PPP calls initiated. |
| C32 usrCipPPPStatisticsConnRenegotiated | 1.3.6.1.4.1.429.4.10.44.1.19 | Counter32 | read-only | The number of PPP calls renegotiated. |
| C32 usrCipPPPStatisticsConnSuccess | 1.3.6.1.4.1.429.4.10.44.1.20 | Counter32 | read-only | The number of PPP calls succeeded. |
| C32 usrCipPPPStatisticsConnFailed | 1.3.6.1.4.1.429.4.10.44.1.21 | Counter32 | read-only | The number of PPP calls failed. |
| C32 usrCipPPPStatisticsConnRelease | 1.3.6.1.4.1.429.4.10.44.1.22 | Counter32 | read-only | The number of PPP calls released. |
| C32 usrCipPPPStatisticsConnMobileRelease | 1.3.6.1.4.1.429.4.10.44.1.23 | Counter32 | read-only | The number of PPP calls released by Mobile. |
| C32 usrCipPPPStatisticsConnPDSNRelease | 1.3.6.1.4.1.429.4.10.44.1.24 | Counter32 | read-only | The number of PPP calls released by PDSN. |
| C32 usrCipPPPStatisticsConnLCPFailed | 1.3.6.1.4.1.429.4.10.44.1.25 | Counter32 | read-only | The number of PPP calls failed at LCP state. |
| C32 usrCipPPPStatisticsConnAuthFailed | 1.3.6.1.4.1.429.4.10.44.1.26 | Counter32 | read-only | The number of PPP calls failed at authentication state. |
| C32 usrCipPPPStatisticsConnIPCPFailed | 1.3.6.1.4.1.429.4.10.44.1.27 | Counter32 | read-only | The number of PPP calls failed at IPCP state. |
| C32 usrCipPPPStatisticsConnRenegPDSN | 1.3.6.1.4.1.429.4.10.44.1.28 | Counter32 | read-only | The number of PPP calls renegotiated by PDSN. |
| C32 usrCipPPPStatisticsConnRenegMobile | 1.3.6.1.4.1.429.4.10.44.1.29 | Counter32 | read-only | The number of PPP calls renegotiated by Mobile. |
| C32 usrCipPPPStatisticsConnRenegIPMismatch | 1.3.6.1.4.1.429.4.10.44.1.30 | Counter32 | read-only | The number of PPP calls renegotiated due to IP mismatch. |
| C32 usrCipPPPStatisticsConnRenegOtherReasons | 1.3.6.1.4.1.429.4.10.44.1.31 | Counter32 | read-only | The number of PPP calls renegotiated due to some reason. |
| C32 usrCipPPPStatisticsConnCHAPAuthSuccess | 1.3.6.1.4.1.429.4.10.44.1.32 | Counter32 | read-only | The number of PPP calls successfully authenticated with CHAP. |
| C32 usrCipPPPStatisticsConnCHAPAuthFailed | 1.3.6.1.4.1.429.4.10.44.1.33 | Counter32 | read-only | The number of PPP calls failed in CHAP authentication. |
| C32 usrCipPPPStatisticsConnPAPAuthSuccess | 1.3.6.1.4.1.429.4.10.44.1.34 | Counter32 | read-only | The number of PPP calls successfully authenticated with PAP. |
| C32 usrCipPPPStatisticsConnPAPAuthFailed | 1.3.6.1.4.1.429.4.10.44.1.35 | Counter32 | read-only | The number of PPP calls failed in PAP authentication. |
| C32 usrCipPPPStatisticsConnMSCHAPAuthSuccess | 1.3.6.1.4.1.429.4.10.44.1.36 | Counter32 | read-only | The number of PPP calls successfully authenticated with MSCHAP. |
| C32 usrCipPPPStatisticsConnMSCHAPAuthFailed | 1.3.6.1.4.1.429.4.10.44.1.37 | Counter32 | read-only | The number of PPP calls failed in MSCHAP authentication. |
| C32 usrCipPPPStatisticsConnEAPAuthSuccess | 1.3.6.1.4.1.429.4.10.44.1.38 | Counter32 | read-only | The number of PPP calls successfully authenticated with EAP. |
| C32 usrCipPPPStatisticsConnEAPAuthFailed | 1.3.6.1.4.1.429.4.10.44.1.39 | Counter32 | read-only | The number of PPP calls failed in EAP authentication. |
| C32 usrCipPPPStatisticsNumLCPFailMaxRetx | 1.3.6.1.4.1.429.4.10.44.1.40 | Counter32 | read-only | The number of PPP calls failed after maximum retries while negotiating LCP. |
| C32 usrCipPPPStatisticsNumLCPFailUnsupport | 1.3.6.1.4.1.429.4.10.44.1.41 | Counter32 | read-only | The number of PPP calls failed due to unsupported attribute while negotiating LCP. |
| C32 usrCipPPPStatisticsNumLCPFailUnknown | 1.3.6.1.4.1.429.4.10.44.1.42 | Counter32 | read-only | The number of PPP calls failed due to unknown reason while negotiating LCP. |
| C32 usrCipPPPStatisticsNumIPCPFailMaxRetx | 1.3.6.1.4.1.429.4.10.44.1.43 | Counter32 | read-only | The number of PPP calls failed after maximum retries while negotiating IPCP. |
| C32 usrCipPPPStatisticsNumIPCPFailUnsupport | 1.3.6.1.4.1.429.4.10.44.1.44 | Counter32 | read-only | The number of PPP calls failed due to unsupported attribute while negotiating IPCP. |
| C32 usrCipPPPStatisticsNumIPCPFailUnknown | 1.3.6.1.4.1.429.4.10.44.1.45 | Counter32 | read-only | The number of PPP calls failed due to unknown reason while negotiating IPCP. |
| C32 usrCipPPPStatisticsConnLCPEntered | 1.3.6.1.4.1.429.4.10.44.1.46 | Counter32 | read-only | The number of PPP calls which entered LCP state. |
| C32 usrCipPPPStatisticsConnAuthEntered | 1.3.6.1.4.1.429.4.10.44.1.47 | Counter32 | read-only | The number of PPP calls which entered authentication state. |
| C32 usrCipPPPStatisticsConnIPCPEntered | 1.3.6.1.4.1.429.4.10.44.1.48 | Counter32 | read-only | The number of PPP calls which entered IPCP state. |
| C32 usrCipPPPStatisticsTotalCallsWithCompression | 1.3.6.1.4.1.429.4.10.44.1.49 | Counter32 | read-only | The total number of PPP calls which used compression. |
| C32 usrCipPPPStatisticsConnsFailedBeforeLcp | 1.3.6.1.4.1.429.4.10.44.1.50 | Counter32 | read-only | The number of PPP calls failed before LCP negotiated even started. An example is running out of memmory or some other internal failure before LCP begins. |
| C32 usrCipPPPStatisticsConnsReachedLcpOpen | 1.3.6.1.4.1.429.4.10.44.1.51 | Counter32 | read-only | The number of PPP calls that have successfully negotiated the LCP options, have reached the LCP Open stane, and have proceeded to the next PPP phase (usually Authentication). |
| C32 usrCipPPPStatisticsConnsAuthSkipped | 1.3.6.1.4.1.429.4.10.44.1.52 | Counter32 | read-only | The number of PPP calls that have negotiated to have no authentication protocol, have reached the LCP Open state, and therefore have skipped the PPP Authentication phase, and proceeded directly to the PPP Network phase. |
| C32 usrCipPPPStatisticsConnsCHAPAuthAborted | 1.3.6.1.4.1.429.4.10.44.1.53 | Counter32 | read-only | The number of PPP calls failed during CHAP authentication at a different layer than CHAP authentication prior to CHAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server. |
| C32 usrCipPPPStatisticsConnsPAPAuthAborted | 1.3.6.1.4.1.429.4.10.44.1.54 | Counter32 | read-only | The number of PPP calls failed during PAP authentication at a different layer than PAP authentication prior to PAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server. |
| C32 usrCipPPPStatisticsConnsMSCHAPAuthAborted | 1.3.6.1.4.1.429.4.10.44.1.55 | Counter32 | read-only | The number of PPP calls failed during MSCHAP authentication at a different layer than MSCHAP authentication prior to MSCHAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server. |
| C32 usrCipPPPStatisticsConnsEAPAuthAborted | 1.3.6.1.4.1.429.4.10.44.1.56 | Counter32 | read-only | The number of PPP calls failed during EAP authentication at a different layer than EAP authentication prior to EAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server. |
| C32 usrCipPPPStatisticsConnsAuthPassed | 1.3.6.1.4.1.429.4.10.44.1.57 | Counter32 | read-only | The number of PPP calls that have successfully passed the authentication phase, and have proceeded to the PPP Network phase. |
| C32 usrCipPPPStatisticsConnsRenegotiatedAfterSetup | 1.3.6.1.4.1.429.4.10.44.1.58 | Counter32 | read-only | The number of PPP calls that have initiated renegotiation after PPP link reached the fully setup state. |
| usrCipSpeedStatisticsTable | 1.3.6.1.4.1.429.4.10.45 | not-accessible | The table listing the CIP Speed statistics for all the calls coming in. | |
| usrCipSpeedStatisticsEntry | 1.3.6.1.4.1.429.4.10.45.1 | not-accessible | CIP Speed statistics of the incoming calls. | |
| I32 usrCipSpeedStatisticsIndex | 1.3.6.1.4.1.429.4.10.45.1.1 | Integer32 | not-accessible | The index for the speed statistics display. they are 0-now & 1-total. |
| C32 usrCipSpeedStatisticsSpeed300 | 1.3.6.1.4.1.429.4.10.45.1.2 | Counter32 | read-only | The number of calls with speed of 300. |
| C32 usrCipSpeedStatisticsSpeed1200 | 1.3.6.1.4.1.429.4.10.45.1.3 | Counter32 | read-only | The number of calls with speed of 1200. |
| C32 usrCipSpeedStatisticsSpeed2400 | 1.3.6.1.4.1.429.4.10.45.1.4 | Counter32 | read-only | The number of calls with speed of 2400. |
| C32 usrCipSpeedStatisticsSpeed4800 | 1.3.6.1.4.1.429.4.10.45.1.5 | Counter32 | read-only | The number of calls with speed of 4800. |
| C32 usrCipSpeedStatisticsSpeed7200 | 1.3.6.1.4.1.429.4.10.45.1.6 | Counter32 | read-only | The number of calls with speed of 7200. |
| C32 usrCipSpeedStatisticsSpeed9600 | 1.3.6.1.4.1.429.4.10.45.1.7 | Counter32 | read-only | The number of calls with speed of 9600. |
| C32 usrCipSpeedStatisticsSpeed12000 | 1.3.6.1.4.1.429.4.10.45.1.8 | Counter32 | read-only | The number of calls with speed of 12000. |
| C32 usrCipSpeedStatisticsSpeed14400 | 1.3.6.1.4.1.429.4.10.45.1.9 | Counter32 | read-only | The number of calls with speed of 14400. |
| C32 usrCipSpeedStatisticsSpeed16800 | 1.3.6.1.4.1.429.4.10.45.1.10 | Counter32 | read-only | The number of calls with speed of 16800. |
| C32 usrCipSpeedStatisticsSpeed19200 | 1.3.6.1.4.1.429.4.10.45.1.11 | Counter32 | read-only | The number of calls with speed of 19200. |
| C32 usrCipSpeedStatisticsSpeed21600 | 1.3.6.1.4.1.429.4.10.45.1.12 | Counter32 | read-only | The number of calls with speed of 21600. |
| C32 usrCipSpeedStatisticsSpeed28800 | 1.3.6.1.4.1.429.4.10.45.1.13 | Counter32 | read-only | The number of calls with speed of 28800. |
| C32 usrCipSpeedStatisticsSpeed38400 | 1.3.6.1.4.1.429.4.10.45.1.14 | Counter32 | read-only | The number of calls with speed of 38400. |
| C32 usrCipSpeedStatisticsSpeed57600 | 1.3.6.1.4.1.429.4.10.45.1.15 | Counter32 | read-only | The number of calls with speed of 57600. |
| C32 usrCipSpeedStatisticsSpeed115200 | 1.3.6.1.4.1.429.4.10.45.1.16 | Counter32 | read-only | The number of calls with speed of 115200. |
| C32 usrCipSpeedStatisticsSpeed288000 | 1.3.6.1.4.1.429.4.10.45.1.17 | Counter32 | read-only | The number of calls with speed of 288000. |
| C32 usrCipSpeedStatisticsSpeed751200 | 1.3.6.1.4.1.429.4.10.45.1.18 | Counter32 | read-only | The number of calls with speed of 75_1200. |
| C32 usrCipSpeedStatisticsSpeed120075 | 1.3.6.1.4.1.429.4.10.45.1.19 | Counter32 | read-only | The number of calls with speed of 1200_75. |
| C32 usrCipSpeedStatisticsSpeed24000 | 1.3.6.1.4.1.429.4.10.45.1.20 | Counter32 | read-only | The number of calls with speed of 24000. |
| C32 usrCipSpeedStatisticsSpeed26400 | 1.3.6.1.4.1.429.4.10.45.1.21 | Counter32 | read-only | The number of calls with a speed of 26400. |
| C32 usrCipSpeedStatisticsSpeed31200 | 1.3.6.1.4.1.429.4.10.45.1.22 | Counter32 | read-only | The number of calls with a speed of 31200. |
| C32 usrCipSpeedStatisticsSpeed33600 | 1.3.6.1.4.1.429.4.10.45.1.23 | Counter32 | read-only | The number of calls with a speed of 33600. |
| C32 usrCipSpeedStatisticsSpeed32000 | 1.3.6.1.4.1.429.4.10.45.1.24 | Counter32 | read-only | The number of calls with a speed of 32000. |
| C32 usrCipSpeedStatisticsSpeed36000 | 1.3.6.1.4.1.429.4.10.45.1.25 | Counter32 | read-only | The number of calls with a speed of 36000. |
| C32 usrCipSpeedStatisticsSpeed40000 | 1.3.6.1.4.1.429.4.10.45.1.26 | Counter32 | read-only | The number of calls with a speed of 40000. |
| C32 usrCipSpeedStatisticsSpeed44000 | 1.3.6.1.4.1.429.4.10.45.1.27 | Counter32 | read-only | The number of calls with a speed of 44000. |
| C32 usrCipSpeedStatisticsSpeed48000 | 1.3.6.1.4.1.429.4.10.45.1.28 | Counter32 | read-only | The number of calls with a speed of 48000. |
| C32 usrCipSpeedStatisticsSpeed49333 | 1.3.6.1.4.1.429.4.10.45.1.29 | Counter32 | read-only | The number of calls with a speed of 49333. |
| C32 usrCipSpeedStatisticsSpeed50666 | 1.3.6.1.4.1.429.4.10.45.1.30 | Counter32 | read-only | The number of calls with a speed of 50666. |
| C32 usrCipSpeedStatisticsSpeed52000 | 1.3.6.1.4.1.429.4.10.45.1.31 | Counter32 | read-only | The number of calls with a speed of 52000. |
| C32 usrCipSpeedStatisticsSpeed53333 | 1.3.6.1.4.1.429.4.10.45.1.32 | Counter32 | read-only | The number of calls with a speed of 53333. |
| C32 usrCipSpeedStatisticsSpeed54666 | 1.3.6.1.4.1.429.4.10.45.1.33 | Counter32 | read-only | The number of calls with a speed of 54666. |
| C32 usrCipSpeedStatisticsSpeed56000 | 1.3.6.1.4.1.429.4.10.45.1.34 | Counter32 | read-only | The number of calls with a speed of 56000. |
| C32 usrCipSpeedStatisticsSpeed57333 | 1.3.6.1.4.1.429.4.10.45.1.35 | Counter32 | read-only | The number of calls with a speed of 57333. |
| C32 usrCipSpeedStatisticsSpeed58666 | 1.3.6.1.4.1.429.4.10.45.1.36 | Counter32 | read-only | The number of calls with a speed of 58666. |
| C32 usrCipSpeedStatisticsSpeed60000 | 1.3.6.1.4.1.429.4.10.45.1.37 | Counter32 | read-only | The number of calls with a speed of 60000. |
| C32 usrCipSpeedStatisticsSpeed61333 | 1.3.6.1.4.1.429.4.10.45.1.38 | Counter32 | read-only | The number of calls with a speed of 61333. |
| C32 usrCipSpeedStatisticsSpeed64000 | 1.3.6.1.4.1.429.4.10.45.1.39 | Counter32 | read-only | The number of calls with speed of 64000. |
| DAT usrCipSpeedStatisticsResetTime | 1.3.6.1.4.1.429.4.10.45.1.40 | DateAndTime | read-write | Time the Speed statistics counters were last reset to value zero. |
| usrCipPacketSizeStatisticsTable | 1.3.6.1.4.1.429.4.10.46 | not-accessible | Size of the PPP packets in each direction. packet size of every 64 bytes. ie 0-64, 64-128, 128-192,, 2048. Which gives 32 samples. | |
| usrCipPacketSizeStatisticsEntry | 1.3.6.1.4.1.429.4.10.46.1 | not-accessible | CIP PPP packet size statistics | |
| I32 usrCipPacketSizeStatisticsIndex | 1.3.6.1.4.1.429.4.10.46.1.1 | Integer32 | not-accessible | The index for the PPP packet size samples. |
| C32 usrCipPacketUpLoadSizes | 1.3.6.1.4.1.429.4.10.46.1.2 | Counter32 | read-only | The PPP Upload packet size samples. |
| C32 usrCipPacketDownLoadSizes | 1.3.6.1.4.1.429.4.10.46.1.3 | Counter32 | read-only | The PPP Download packet size samples. |
| C32 usrCipModemDisconectReasonNoError | 1.3.6.1.4.1.429.4.10.47 | Counter32 | read-only | Number of calls with disconnect reason no_error. |
| C32 usrCipModemDisconectReasonNoCarrier | 1.3.6.1.4.1.429.4.10.48 | Counter32 | read-only | Number of calls with disconnect reason no_carrier. |
| C32 usrCipModemDisconectReasonNoDsr | 1.3.6.1.4.1.429.4.10.49 | Counter32 | read-only | Number of calls with disconnect reason no_dsr. |
| C32 usrCipModemDisconectReasonTimeout | 1.3.6.1.4.1.429.4.10.50 | Counter32 | read-only | Number of calls with disconnect reason timeout. |
| C32 usrCipModemDisconectReasonReset | 1.3.6.1.4.1.429.4.10.51 | Counter32 | read-only | Number of calls with disconnect reason reset. |
| C32 usrCipModemDisconectReasonCallDropReq | 1.3.6.1.4.1.429.4.10.52 | Counter32 | read-only | Number of calls with disconnect reason call_drop_req. |
| C32 usrCipModemDisconectReasonIdleTimeout | 1.3.6.1.4.1.429.4.10.53 | Counter32 | read-only | Number of calls with disconnect reason idle_timeout. |
| C32 usrCipModemDisconectReasonSessionTimeout | 1.3.6.1.4.1.429.4.10.54 | Counter32 | read-only | Number of calls with disconnect reason session_timeout. |
| C32 usrCipModemDisconectReasonUserReqDrop | 1.3.6.1.4.1.429.4.10.55 | Counter32 | read-only | Number of calls with disconnect reason user_req_drop. |
| C32 usrCipModemDisconectReasonHostReqDrop | 1.3.6.1.4.1.429.4.10.56 | Counter32 | read-only | Number of calls with disconnect reason host_req_drop. |
| C32 usrCipModemDisconectReasonServiceInterruption | 1.3.6.1.4.1.429.4.10.57 | Counter32 | read-only | Number of calls with disconnect reason service_interruption. |
| C32 usrCipModemDisconectReasonServiceUnavailable | 1.3.6.1.4.1.429.4.10.58 | Counter32 | read-only | Number of calls with disconnect reason service_unavailable. |
| C32 usrCipModemDisconectReasonUserInputError | 1.3.6.1.4.1.429.4.10.59 | Counter32 | read-only | Number of calls with disconnect reason user_input_error. |
| C32 usrCipModemDisconectReasonNasDropForCallback | 1.3.6.1.4.1.429.4.10.60 | Counter32 | read-only | Number of calls with disconnect reason nas_drop_for_callback. |
| C32 usrCipModemDisconectReasonnasDropMiscNonError | 1.3.6.1.4.1.429.4.10.61 | Counter32 | read-only | Number of calls with disconnect reason nas_drop_misc_non_error. |
| C32 usrCipModemDisconectReasonNasInternalError | 1.3.6.1.4.1.429.4.10.62 | Counter32 | read-only | Number of calls with disconnect reason nas_internal_error. |
| DAT usrCipStatisticsResetCallDuration | 1.3.6.1.4.1.429.4.10.63 | DateAndTime | read-write | Daily time we reset all the call statistics counters. |
| DAT usrCipStatisticsResetPPPUploadPackets | 1.3.6.1.4.1.429.4.10.64 | DateAndTime | read-write | Daily time we reset all the ppp upload packets counters. |
| DAT usrCipStatisticsResetPPPDownloadPackets | 1.3.6.1.4.1.429.4.10.65 | DateAndTime | read-write | Daily time we reset all the PPP download packets counters. |
| DAT usrCipStatisticsResetCallDisconnectReasons | 1.3.6.1.4.1.429.4.10.66 | DateAndTime | read-write | Daily time we reset all the call disconnect reason counters. |
| C32 usrCipStatistics100PercentModemUtilization | 1.3.6.1.4.1.429.4.10.67 | Counter32 | read-only | Number of minutes at modems 100 % utilization. |
| usrCipModemCompressionStatisticsTable | 1.3.6.1.4.1.429.4.10.68 | not-accessible | The table listing the Modem Compression statistics for all the calls coming in. | |
| usrCipModemCompressionStatisticsEntry | 1.3.6.1.4.1.429.4.10.68.1 | not-accessible | CIP Modem Compression statistics | |
| I32 usrCipModemCompressionStatisticsIndex | 1.3.6.1.4.1.429.4.10.68.1.1 | Integer32 | not-accessible | The index for the Modem Compression statistics display. they are 0-now& 1-total. |
| C32 usrCipModemCompressionStatisticsModemCompNone | 1.3.6.1.4.1.429.4.10.68.1.2 | Counter32 | read-only | The number of calls that has No Modem Compression. |
| C32 usrCipModemCompressionStatisticsModemCompV42Bis | 1.3.6.1.4.1.429.4.10.68.1.3 | Counter32 | read-only | The number of calls that has V_42Bis modem compression. |
| C32 usrCipModemCompressionStatisticsModemCompMnp5 | 1.3.6.1.4.1.429.4.10.68.1.4 | Counter32 | read-only | The number of calls that has mnp5 modem compression. |
| DAT usrCipModemCompressionStatisticsResetTime | 1.3.6.1.4.1.429.4.10.68.1.5 | DateAndTime | read-write | Time the Speed statistics counters were last reset to value zero. |
| I32 usrCipCfmLoginTableFlag | 1.3.6.1.4.1.429.4.10.69 | Integer32 | read-write | This flag triggers a save of cip login table. |
| usrCipLoginTable | 1.3.6.1.4.1.429.4.10.70 | not-accessible | ||
| usrCipLoginEntry | 1.3.6.1.4.1.429.4.10.70.1 | not-accessible | ||
| OCT usrCipLoginListName | 1.3.6.1.4.1.429.4.10.70.1.1 | OCTET STRING | not-accessible | This is the cip login list name |
| I32 usrCipLoginPref | 1.3.6.1.4.1.429.4.10.70.1.2 | Integer32 | not-accessible | login preference index |
| IP usrCipLoginIpAddress | 1.3.6.1.4.1.429.4.10.70.1.3 | IpAddress | read-write | This is the cip login host ip address |
| I32 usrCipLoginPort | 1.3.6.1.4.1.429.4.10.70.1.4 | Integer32 | read-write | This is the cip login host port |
| OCT usrCipLoginListNameForPrint | 1.3.6.1.4.1.429.4.10.70.1.5 | OCTET STRING | read-write | This is the cip login list name. Added the second mib to print the login table name. The first mib is an index to table |
| I32 usrCipLoginEntryDelete | 1.3.6.1.4.1.429.4.10.70.1.6 | Integer32 | read-write | Setting this entry will delete the particular table |
| I32 usrCipTelnetConnectionTimeout | 1.3.6.1.4.1.429.4.10.71 | Integer32 | read-write | For host rotation a configurable connection timeout |
| I32 usrCipTelnetBuffering | 1.3.6.1.4.1.429.4.10.72 | Integer32 | read-write | For a login user, whether CIP to TELNET buffering should be turned on or off flag |
| INT usrCipPDSNAcctStyle | 1.3.6.1.4.1.429.4.10.77 | INTEGER | read-write | This flag determines whether the PDSN emulates the IWU while sending the interim accounting packets. |
| C32 usrCipPppTotalReleases | 1.3.6.1.4.1.429.4.10.78 | Counter32 | read-only | Count of PPP sessions which got released for any reason after the PPP session was fully set up, i.e. has successfully exited the IPCP stage and was in the operations stage and then got released. This counter was added for Wireless IP to monitor PPP over the A10 R-P (Radio Node - PDSN) link over which runs multiple PPP over GRE over IP. |
| C32 usrCipPppUserReleases | 1.3.6.1.4.1.429.4.10.79 | Counter32 | read-only | Count of PPP sessions which got released by the user (LCP Term Req). This counter was added for Wireless IP to track the number of Mobile initiated releases which occured after connection was fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released. |
| C32 usrCipPppRpReleases | 1.3.6.1.4.1.429.4.10.80 | Counter32 | read-only | Count of PPP sessions which got released via the 3G R-P interface. This counter was added for Wireless IP to track the number of RAN initiated releases which occured after the PPP connection was fully setup (after IPCP). The RAN (Radio Access Node) aka RN (Radio Node) aka RNN (Radio Network Node) aka PCF (Packet Communication Facility) initiates the release by de-registering that mobile PPP connection by sending a Mobile-IP-like Registration Request with a lifetime of zero for that mobile over the 3GPP2 A11 R-P interface. Note that the PPP session itself is carried over a GRE tunnel that forms the A10 portion of the 3GPP2 R-P interface. |
| C32 usrCipPppFaReleases | 1.3.6.1.4.1.429.4.10.81 | Counter32 | read-only | Count of PPP sessions which got released by request of the FA (Mobile IP Foreign Agent) process in this PDSN. This is only counted when the PPP session is fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released. |
| C32 usrCipPppFacnReleases | 1.3.6.1.4.1.429.4.10.82 | Counter32 | read-only | Count of PPP sessions which got released by request of the FACN (Foreign Agent Control Node). This typically occurs when a handoff has occured for a Mobile Station to another PDSN, and the FACN notifies us of this fact so that the PPP resources can be released faster. This is only counted when the PPP session is fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released. |
| C32 usrCipPppLocalAdminReleases | 1.3.6.1.4.1.429.4.10.83 | Counter32 | read-only | Count of PPP sessions which got released by a local administrative command. This counter was added for Wireless IP to track the number of PDSN initiated releases (Admin Command) which occured after the PPP connection was fully setup (after successful IPCP). |
| C32 usrCipPppIdleTimeoutReleases | 1.3.6.1.4.1.429.4.10.84 | Counter32 | read-only | Count of PPP sessions which got released due to local Idle Timeout. This counter was added for Wireless IP to track the number of PDSN initiated releases (Idle Timeout) which occured after the PPP connection was fully setup (after successful IPCP). |
| C32 usrCipPppL2tpTunnelReleases | 1.3.6.1.4.1.429.4.10.85 | Counter32 | read-only | Count of PPP sessions which got released locally due to attached an L2TP tunnel being released. This counter was added for Wireless IP to track the number of PDSN initiated releases (L2TP tunnel release) which occured after the L2TP connection was fully setup. |
| C32 usrCipPppInsufResourceReleases | 1.3.6.1.4.1.429.4.10.86 | Counter32 | read-only | Count of PPP sessions which got released locally due to insufficient resources. This counter was added for Wireless IP to track the number of PDSN initiated releases (Insufficient resources) which occured after the PPP connection was fully setup (successful IPCP). This unnecessary counter has been removed. |
| C32 usrCipPppIngressFilteringReleases | 1.3.6.1.4.1.429.4.10.87 | Counter32 | read-only | Count of PPP sessions which got released locally due to PPP renegotiations triggered by Ingress Filtering. This counter was added for Wireless IP to track the number of PDSN initiated releases (Ingress Filtering) which occured after the PPP connection was fully setup (successful IPCP). |
| C32 usrCipPppLocalMiscReleases | 1.3.6.1.4.1.429.4.10.88 | Counter32 | read-only | Count of PPP sessions which got released locally due to miscellaneous other reasons not otherwise covered. This counter was added for Wireless IP to track the number of PDSN initiated releases (Miscellaneous Reason) which occured after the PPP connection was fully setup (successful IPCP). |
| G32 usrCipCallCurrentIs95cPppConns | 1.3.6.1.4.1.429.4.10.89 | Gauge32 | read-only | Number of Current Active IS-95C PPP Connections. |
| G32 usrCipCallActivePppConns | 1.3.6.1.4.1.429.4.10.90 | Gauge32 | read-only | Number of Active PPP Connections. |
| INT usrCipShortTimeBillingSolnEnabled | 1.3.6.1.4.1.429.4.10.91 | INTEGER | read-write | This is the switch to enable/disable the Solution to Short Time Billing feature |
| I32 usrCipShortTimeBillingSolnTimer | 1.3.6.1.4.1.429.4.10.92 | Integer32 | read-write | The value of the Short Term Billing Solution Timer |
RFC description
Manages serial port parameters for CIP (CommWorks Internet Protocol) cards in 3Com enterprise devices.
Start monitoring CommWorks (3Com) Total Control-style broadband/dial access chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.