Cip-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32 , IpAddress FROM SNMPv2-SMI DisplayString, DateAndTime FROM SNMPv2-TC UsrLongString, common FROM USR-DEFINITIONS-MIB; usrCip MODULE-IDENTITY LAST-UPDATED "200208012020Z" ORGANIZATION "CommWorks Corporation, a 3Com Company" CONTACT-INFO "Customer Support" DESCRIPTION "The commWorks enterprise defined MIB objects for CIP" -- REVISION "200202182020Z" -- DESCRIPTION -- "Converted to SNMPv2" ::= { common 10 } -- textual conventions -- -- textual conventions are like pre-processor macro in 'C' -- (i.e. #define statements) -- Use them to define your own 'datatypes' NetNumber ::= OCTET STRING (SIZE(4)) -- Begin managed object definitions here... usrCipPortParamTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the serial port parameters." ::= { usrCip 1 } usrCipPortParamEntry OBJECT-TYPE SYNTAX USRCIPPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a serial interface." INDEX { usrCipPortIndex } ::= {usrCipPortParamTable 1} USRCIPPortParamEntry ::= SEQUENCE { usrCipPortIndex Integer32, usrCipPortType INTEGER, usrCipPortAccess INTEGER, usrCipPortHostType INTEGER, usrCipPortLoginService INTEGER, usrCipPortTcpPortNumber Integer32, usrCipPortLoginMsg OCTET STRING, usrCipPortLoginPrompt OCTET STRING, usrCipPortIpAddress IpAddress, usrCipPortHostIpAddress IpAddress, usrCipPortNetMask Integer32, usrCipPortProtocol INTEGER, usrCipPortMtu Integer32, usrCipPortIdleTimeOut Integer32, usrCipPortState INTEGER, usrCipPortNumConns Counter32, usrCipPortConnType INTEGER, usrCipUserName OCTET STRING, usrCipConnStartTime Integer32, usrCipDataLinkConn INTEGER, usrCipInitScriptName DisplayString, usrCipIfConnType INTEGER, usrCipPromptUserName OCTET STRING, usrCipUserPasswd OCTET STRING, usrCipPortIfName OCTET STRING, usrCipPortDialPrefix OCTET STRING, usrCipPortCfgScript DisplayString, usrCipPortCfgScriptResult UsrLongString, usrCipPortPromptingStyle INTEGER, usrCipPortLoginProcessing INTEGER, usrCipPortCallType INTEGER, usrCipPortDNISAuthentication INTEGER, usrCipPortDNISAuthTime INTEGER, usrCipPortDNISAuthType INTEGER, usrCipPortDNISPassword OCTET STRING, usrCipPortDNISTimeout Integer32, usrCipPortParity INTEGER, usrCipPortDomainName OCTET STRING, usrCipPortDelimiter OCTET STRING, usrCipPromptDelay Integer32, usrCipPromptTimeout Integer32, usrCipSpecialXonXoffFlow INTEGER, usrCipCalledPhoneNumber OCTET STRING, usrCipCallingPhoneNumber OCTET STRING, usrCipPortGlobalConnId Integer32, usrCipPortUseDnisPool INTEGER, usrCipPortLoginTable OCTET STRING, usrCipPortMobileType INTEGER } usrCipPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of the physical interface." ::= {usrCipPortParamEntry 1} usrCipPortType OBJECT-TYPE SYNTAX INTEGER { login (1), network (2), login-network (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the physical port." --CONFIGURABLE ::= {usrCipPortParamEntry 2} usrCipPortAccess OBJECT-TYPE SYNTAX INTEGER { dial-in(1), dial-out(2), two-way(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports." --CONFIGURABLE ::= {usrCipPortParamEntry 3} usrCipPortHostType OBJECT-TYPE SYNTAX INTEGER { undefined (0), default (1), prompt (2), specified (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The host type that the dial-in user will be connected to." --CONFIGURABLE ::= {usrCipPortParamEntry 4} usrCipPortLoginService OBJECT-TYPE SYNTAX INTEGER { telnet (1), rlogin (2), cleartcp (3), ping (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Service type that the dial-in user will be connected to." --CONFIGURABLE ::= {usrCipPortParamEntry 5} usrCipPortTcpPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The tcp port number associated with the service type." --CONFIGURABLE ::= {usrCipPortParamEntry 6} usrCipPortLoginMsg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..800)) MAX-ACCESS read-write STATUS current DESCRIPTION "The salutation message associated with a specific port." --CONFIGURABLE ::= {usrCipPortParamEntry 7} usrCipPortLoginPrompt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The login prompt associated with a specific port." --CONFIGURABLE ::= {usrCipPortParamEntry 8} usrCipPortIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for a specific serial port." --CONFIGURABLE ::= {usrCipPortParamEntry 9} usrCipPortHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A host IP address specified for this interface." --CONFIGURABLE ::= {usrCipPortParamEntry 10} usrCipPortNetMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The netmask associated with a specific serial interface." --CONFIGURABLE ::= {usrCipPortParamEntry 11} usrCipPortProtocol OBJECT-TYPE SYNTAX INTEGER { ppp (1), slip (2), arap (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol type configured for a specific interface." --CONFIGURABLE ::= {usrCipPortParamEntry 12} usrCipPortMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The mtu value associated with a specific interface." --CONFIGURABLE ::= {usrCipPortParamEntry 13} usrCipPortIdleTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum idle time specified for an interface." --CONFIGURABLE ::= {usrCipPortParamEntry 14} usrCipPortState OBJECT-TYPE SYNTAX INTEGER { port-disabled (0), port-initializing(1), port-available(2), port-connecting(3), port-connected(4), port-disconnecting(5), port-disconnected(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the serial line." ::= {usrCipPortParamEntry 15} usrCipPortNumConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections made on this if." ::= {usrCipPortParamEntry 16} usrCipPortConnType OBJECT-TYPE SYNTAX INTEGER { undefined-conn(0), on-demand-conn(1), dial-back-conn(2), continuous-conn(3), manual-conn(4), timed-conn(5), shared-modem-conn(6), dial-in-conn(7), bond-conn(8), dedicated-conn (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The connection type on this interface." ::= {usrCipPortParamEntry 17} usrCipUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name user connected to this interface. " ::= {usrCipPortParamEntry 18} usrCipConnStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The start time of a connection specified on an interface." ::= {usrCipPortParamEntry 19} usrCipDataLinkConn OBJECT-TYPE SYNTAX INTEGER { undefined(0), telnet (1), rlogin (2), clear-tcp (3), ppp (4), arap (5), slip (6), admin(7), ping(8), none(9), lt2p(10), pptp(11), tap(12), cliNas(13), shell(14), pingIp (15), vtp (16), sipRpt7111a (17), -- wireline only sipRpt7111m (18), -- wireline only sipRpt729 (19) -- wireline only } MAX-ACCESS read-only STATUS current DESCRIPTION "The data link layer that a specific dial-in session is connected to." ::= {usrCipPortParamEntry 20} usrCipInitScriptName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the script" --CONFIGURABLE ::= { usrCipPortParamEntry 21 } usrCipIfConnType OBJECT-TYPE SYNTAX INTEGER { if-direct-conn (1), if-direct-network-conn (2), if-normal-conn (3), if-prompt-passwd (4), if-prompt-none (5), if-ppp-only(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the connection that i/f is configured for." --CONFIGURABLE ::= { usrCipPortParamEntry 22 } usrCipPromptUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This could only be set if the port is configured not to prompt for username." --CONFIGURABLE ::= {usrCipPortParamEntry 23} usrCipUserPasswd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This could only be set if the port is configured to not prompt for password." --CONFIGURABLE ::= { usrCipPortParamEntry 24 } usrCipPortIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the serial line interface." ::= { usrCipPortParamEntry 25 } usrCipPortDialPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This string defines the prefix to the phone number." --CONFIGURABLE ::= {usrCipPortParamEntry 26} usrCipPortCfgScript OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This string defines an I-modem or V.34 AT command a value of RESET will cause the modem to be reset and reinitialized with the string found in usrInitScriptCommands. A value of zero indicates no command exists. It cannot be SET to NULL." ::= { usrCipPortParamEntry 27 } usrCipPortCfgScriptResult OBJECT-TYPE SYNTAX UsrLongString (SIZE(0..1350)) MAX-ACCESS read-only STATUS current DESCRIPTION "This string defines the result of the AT command. NVT ASCII characters." ::= { usrCipPortParamEntry 28 } usrCipPortPromptingStyle OBJECT-TYPE SYNTAX INTEGER { local-prompting(1), remote-prompting(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server." --CONFIGURABLE ::= { usrCipPortParamEntry 29 } usrCipPortLoginProcessing OBJECT-TYPE SYNTAX INTEGER { disable-auth-for-none (1), disable-auth-for-async-ppp (2), disable-auth-for-sync-ppp (3), disable-auth-for-ppp (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls login processing. This value can be set for controlling user authentication for different types of autodetected PPP calls. Default is authentication is done for all types of PPP calls.." --CONFIGURABLE ::= {usrCipPortParamEntry 30} usrCipPortDomainName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..240)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Domain Name associated with this port " --CONFIGURABLE ::= { usrCipPortParamEntry 31 } usrCipPortDelimiter OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..1)) MAX-ACCESS read-write STATUS current DESCRIPTION "The delimiter string port domain configuration" --CONFIGURABLE ::= { usrCipPortParamEntry 32 } usrCipPortCallType OBJECT-TYPE SYNTAX INTEGER { call-type-pptp(1), call-type-l2tp(2), call-type-none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable call type associated with the interface." --CONFIGURABLE ::= {usrCipPortParamEntry 33} usrCipPortDNISAuthentication OBJECT-TYPE SYNTAX INTEGER { dnis-auth-disabled (1), dnis-auth-preferred (2), dnis-auth-required (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication type" --CONFIGURABLE ::= { usrCipPortParamEntry 34 } usrCipPortDNISAuthTime OBJECT-TYPE SYNTAX INTEGER { before-answer (1), after-answer (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication Time" --CONFIGURABLE ::= { usrCipPortParamEntry 35 } usrCipPortDNISAuthType OBJECT-TYPE SYNTAX INTEGER { dnis (1), ani (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication type" --CONFIGURABLE ::= { usrCipPortParamEntry 36 } usrCipPortDNISPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNIS password." --CONFIGURABLE ::= { usrCipPortParamEntry 37 } usrCipPortDNISTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout if no auth within this time" --CONFIGURABLE ::= {usrCipPortParamEntry 38} usrCipPortParity OBJECT-TYPE SYNTAX INTEGER { no-parity-eight-bit (1), even-seven-bit (2), odd-seven-bit (3), no-parity-seven-bit (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port Parity" --CONFIGURABLE ::= { usrCipPortParamEntry 39 } usrCipPromptDelay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay" --CONFIGURABLE ::= { usrCipPortParamEntry 40 } usrCipPromptTimeout OBJECT-TYPE SYNTAX Integer32 (5..600) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs" --CONFIGURABLE ::= { usrCipPortParamEntry 41 } usrCipSpecialXonXoffFlow OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Special Xon Xoff flow control in modem control receive side" --CONFIGURABLE ::= { usrCipPortParamEntry 42 } usrCipCallingPhoneNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Calling phone number" ::= { usrCipPortParamEntry 43 } usrCipCalledPhoneNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Called phone number" ::= { usrCipPortParamEntry 44 } usrCipPortGlobalConnId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Global Connection Id" ::= { usrCipPortParamEntry 45 } usrCipPortUseDnisPool OBJECT-TYPE SYNTAX INTEGER { dnis-pool-disabled (1), dnis-pool-preferred (2), dnis-pool-required (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "User DNIS pool" --CONFIGURABLE ::= { usrCipPortParamEntry 46 } usrCipPortLoginTable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Login Host Table " --CONFIGURABLE ::= { usrCipPortParamEntry 47 } usrCipPortMobileType OBJECT-TYPE SYNTAX INTEGER { undefined-conn(0), mobile-ip(1), simple-ip(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Mobile Node connected" ::= {usrCipPortParamEntry 48} -- Modem Group Table usrCipModemGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPModemGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the serial port parameters." ::= { usrCip 2 } usrCipModemGroupEntry OBJECT-TYPE SYNTAX USRCIPModemGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a serial interface. All objects required for row creation." INDEX { usrCipModemGroupName } ::= {usrCipModemGroupTable 1} USRCIPModemGroupEntry ::= SEQUENCE { usrCipModemGroupName DisplayString, usrCipModemGroupStatus INTEGER, usrCipModemGroupCount Integer32 } usrCipModemGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of a modem group." ::= { usrCipModemGroupEntry 1 } usrCipModemGroupStatus OBJECT-TYPE SYNTAX INTEGER { add(0), delete(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status could be add or delete the group member specified in the usrCipGroupMembers MIB." --CONFIGURABLE ::= { usrCipModemGroupEntry 2 } usrCipModemGroupCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of modem ports in a specific group." ::= { usrCipModemGroupEntry 3 } -- The Global Host Table usrCipGlblHostTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPGlblHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the global host addresses." ::= { usrCip 3 } usrCipGlblHostEntry OBJECT-TYPE SYNTAX USRCIPGlblHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a host address with tcp port numbers." INDEX { usrCipGlblHostIndex } ::= {usrCipGlblHostTable 1} USRCIPGlblHostEntry ::= SEQUENCE { usrCipGlblHostIndex Integer32, usrCipGlblHostAddress IpAddress, usrCipGlblHostRloginPort Integer32, usrCipGlblHostTelnetPort Integer32, usrCipGlblHostTcpClearPort Integer32, usrCipGlblHostName OCTET STRING, usrCipGlblHostState INTEGER } usrCipGlblHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The identifier of a default host table." ::= { usrCipGlblHostEntry 1 } usrCipGlblHostAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The global host IP address." --CONFIGURABLE ::= { usrCipGlblHostEntry 2 } usrCipGlblHostRloginPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The host rlogin tcp port number." --CONFIGURABLE ::= { usrCipGlblHostEntry 3 } usrCipGlblHostTelnetPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The host telnet port number." --CONFIGURABLE ::= { usrCipGlblHostEntry 4 } usrCipGlblHostTcpClearPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The host tcp clear port number." --CONFIGURABLE ::= { usrCipGlblHostEntry 5 } usrCipGlblHostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The global host name." --CONFIGURABLE ::= { usrCipGlblHostEntry 6 } usrCipGlblHostState OBJECT-TYPE SYNTAX INTEGER { host-undefined (0), host-valid (1), host-invalid (2), host-pending (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of a default host entry." ::= { usrCipGlblHostEntry 7 } -- The Global Parameters usrCipGlblHostSelectionMethod OBJECT-TYPE SYNTAX INTEGER { round-robin(0), random(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The method that will be used to select the default host." --CONFIGURABLE ::= {usrCip 4} usrCipGlblHostType OBJECT-TYPE SYNTAX INTEGER { undefined-host(0), default-host(1), prompt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default host type." --CONFIGURABLE ::= { usrCip 5 } usrCipGlblLoginMsg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user login message" --CONFIGURABLE ::= { usrCip 6 } usrCipGlblUsrCommandPrompt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user command prompt." --CONFIGURABLE ::= { usrCip 7 } usrCipGlblLogNetUserPrompt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The login/network command prompt." --CONFIGURABLE ::= { usrCip 8 } usrCipGlblMgPrompt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The manage prompt." --CONFIGURABLE ::= { usrCip 9 } usrCipGlblUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The default user name used in case the dial-in users don't get prompted for the user name and no user name is configured for the i/f." --CONFIGURABLE ::= { usrCip 10 } usrCipGlblNumCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of calls received since the boot up time." ::= { usrCip 11 } usrCipAllowManageOnDialups OBJECT-TYPE SYNTAX INTEGER { manage-off(0), manage-on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable turns on/off the ability to manage the system through the dialup ports." --CONFIGURABLE ::= { usrCip 12 } usrCipHangUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is set only if a hangup message is sent out. The value of this variable is the interface index." ::= {usrCip 13 } usrCipDialOut OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is set through the CLI when the user manually issues a dial-out." ::= { usrCip 14 } usrCipBusyOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is set only in case the user wants to take the phone off hook." ::= {usrCip 15} usrInitScriptTable OBJECT-TYPE SYNTAX SEQUENCE OF USRInitScriptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the global host addresses." ::= { usrCip 16} usrInitScriptEntry OBJECT-TYPE SYNTAX USRInitScriptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a host address with tcp port numbers." INDEX { usrInitScriptName } ::= {usrInitScriptTable 1} USRInitScriptEntry ::= SEQUENCE { usrInitScriptName DisplayString, usrInitScriptCommands DisplayString, usrInitScriptStatus INTEGER } usrInitScriptName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the script" ::= { usrInitScriptEntry 1 } usrInitScriptCommands OBJECT-TYPE SYNTAX DisplayString (SIZE(0..56)) MAX-ACCESS read-write STATUS current DESCRIPTION "The AT commands that will be sent to the serial line driver every time a connection goes away." --CONFIGURABLE ::= { usrInitScriptEntry 2 } usrInitScriptStatus OBJECT-TYPE SYNTAX INTEGER { normal-status(0), delete-script(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is used to delete a script from the init script list." ::= { usrInitScriptEntry 3 } -- MIB Variables defined for CFM purposes usrCipCfmPortIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPCfmPortIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains CIP port indices. It is defined so that CFM process would be able to save a specific row of portal table." ::= { usrCip 17 } usrCipCfmPortIndexEntry OBJECT-TYPE SYNTAX USRCIPCfmPortIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a serial interface." INDEX { usrCipCfmPortIndex } ::= {usrCipCfmPortIndexTable 1} USRCIPCfmPortIndexEntry ::= SEQUENCE { usrCipCfmPortIndex Integer32, usrCipCfmPortFlag Integer32 } usrCipCfmPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier of the physical interface." ::= {usrCipCfmPortIndexEntry 1} usrCipCfmPortFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The flag that triggers a cfm operation on each interface." ::= {usrCipCfmPortIndexEntry 2 } -- Scalar Flags usrCipCfmAllPortsFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a CFM action." ::= { usrCip 18 } usrCipCfmModemGroupFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of modem group table." ::= { usrCip 19 } usrCipCfmGlblHostTableFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of global host table." ::= { usrCip 20 } usrCipCfmInitScriptFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of init script table." ::= { usrCip 21 } usrCipCfmGlblVarFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of global variables." ::= { usrCip 22 } usrCipCfmSaveAllFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save for all of CIP tables." ::= { usrCip 23 } -- Port Parameters Grouped in a Modem Group usrCipModemPortParamTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPModemPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the serial port parameters." ::= { usrCip 24 } usrCipModemPortParamEntry OBJECT-TYPE SYNTAX USRCIPModemPortParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a serial interface." INDEX { usrCipModemPortName } ::= {usrCipModemPortParamTable 1} USRCIPModemPortParamEntry ::= SEQUENCE { usrCipModemPortName OCTET STRING, usrCipModemPortType INTEGER, usrCipModemPortAccess INTEGER, usrCipModemPortHostType INTEGER, usrCipModemPortLoginService INTEGER, usrCipModemPortTcpPortNumber Integer32, usrCipModemPortLoginMsg OCTET STRING, usrCipModemPortLoginPrompt OCTET STRING, usrCipModemPortIpAddress IpAddress, usrCipModemPortHostIpAddress IpAddress, usrCipModemPortNetMask Integer32, usrCipModemPortProtocol INTEGER, usrCipModemPortMtu Integer32, usrCipModemPortIdleTimeOut Integer32, usrCipModemInitScriptName DisplayString, usrCipModemIfConnType INTEGER, usrCipModemPromptUserName OCTET STRING, usrCipModemUserPasswd OCTET STRING, usrCipModemDialPrefix OCTET STRING, usrCipModemPortPromptingStyle INTEGER, usrCipModemPortLoginProcessing INTEGER, usrCipModemPortDNISAuthentication INTEGER, usrCipModemPortDNISAuthTime INTEGER, usrCipModemPortDNISAuthType INTEGER, usrCipModemPortDNISPassword OCTET STRING, usrCipModemPortDNISTimeout Integer32, usrCipModemPortParity INTEGER, usrCipModemPromptDelay Integer32, usrCipModemPromptTimeout Integer32, usrCipModemSpecialXonXoffFlow INTEGER, usrCipModemUseDnisPool INTEGER, usrCipModemLoginTable OCTET STRING } usrCipModemPortName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of a modem group." ::= {usrCipModemPortParamEntry 1} usrCipModemPortType OBJECT-TYPE SYNTAX INTEGER { login (1), network (2), login-network (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the physical port." ::= {usrCipModemPortParamEntry 2} usrCipModemPortAccess OBJECT-TYPE SYNTAX INTEGER { dial-in(1), dial-out(2), two-way(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports." ::= {usrCipModemPortParamEntry 3} usrCipModemPortHostType OBJECT-TYPE SYNTAX INTEGER { default (1), prompt (2), specified (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The host type that the dial-in user will be connected to." ::= {usrCipModemPortParamEntry 4} usrCipModemPortLoginService OBJECT-TYPE SYNTAX INTEGER { telnet (1), rlogin (2), netdata (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Service type that the dial-in user will be connected to." ::= {usrCipModemPortParamEntry 5} usrCipModemPortTcpPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The tcp port number associated with the service type." ::= {usrCipModemPortParamEntry 6} usrCipModemPortLoginMsg OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The salutation message associated with a specific port." ::= {usrCipModemPortParamEntry 7} usrCipModemPortLoginPrompt OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The login prompt associated with a specific port." ::= {usrCipModemPortParamEntry 8} usrCipModemPortIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address for a specific serial port." ::= {usrCipModemPortParamEntry 9} usrCipModemPortHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A host IP address specified for this interface." ::= {usrCipModemPortParamEntry 10} usrCipModemPortNetMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The netmask associated with a specific serial interface." ::= {usrCipModemPortParamEntry 11} usrCipModemPortProtocol OBJECT-TYPE SYNTAX INTEGER { ppp (1), slip (2), arap (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol type configured for a specific interface." ::= {usrCipModemPortParamEntry 12} usrCipModemPortMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The mtu value associated with a specific interface." ::= {usrCipModemPortParamEntry 13} usrCipModemPortIdleTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum idle time specified for an interface." ::= {usrCipModemPortParamEntry 14} usrCipModemInitScriptName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..7)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the script" ::= { usrCipModemPortParamEntry 15 } usrCipModemIfConnType OBJECT-TYPE SYNTAX INTEGER { if-direct-conn (1), if-direct-network-conn (2), if-normal-conn (3), if-prompt-passwd (4), if-prompt-none (5), if-ppp-only(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the connection that i/f is configured for." ::= { usrCipModemPortParamEntry 16 } usrCipModemPromptUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This could only be set if the port is configured not to prompt for username." ::= { usrCipModemPortParamEntry 17 } usrCipModemUserPasswd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This could only be set if the port is configured to not prompt for password." ::= { usrCipModemPortParamEntry 18 } usrCipModemDialPrefix OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This string defines the prefix to the phone number." ::= { usrCipModemPortParamEntry 19 } usrCipModemPortPromptingStyle OBJECT-TYPE SYNTAX INTEGER { local-prompting(1), remote-prompting(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server." --CONFIGURABLE ::= { usrCipModemPortParamEntry 20 } usrCipModemPortLoginProcessing OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable controls login processing. Setting the value to disable will cause the box to not prompt a user for login name or password. Enabling this value will cause the box to perform normal login name and password prompting." --CONFIGURABLE ::= {usrCipModemPortParamEntry 21} usrCipModemPortDNISAuthentication OBJECT-TYPE SYNTAX INTEGER { dnis-auth-disabled (1), dnis-auth-preferred (2), dnis-auth-required (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication type" --CONFIGURABLE ::= { usrCipModemPortParamEntry 22 } usrCipModemPortDNISAuthTime OBJECT-TYPE SYNTAX INTEGER { before-answer (1), after-answer (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication Time" --CONFIGURABLE ::= { usrCipModemPortParamEntry 23 } usrCipModemPortDNISAuthType OBJECT-TYPE SYNTAX INTEGER { dnis (1), ani (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "DNIS Authentication type" --CONFIGURABLE ::= { usrCipModemPortParamEntry 24 } usrCipModemPortDNISPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNIS password." --CONFIGURABLE ::= { usrCipModemPortParamEntry 25 } usrCipModemPortDNISTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout if no auth within this time" --CONFIGURABLE ::= {usrCipModemPortParamEntry 26} usrCipModemPortParity OBJECT-TYPE SYNTAX INTEGER { no-parity-eight-bit (1), even-seven-bit (2), odd-seven-bit (3), no-parity-seven-bit (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Port Parity" --CONFIGURABLE ::= { usrCipModemPortParamEntry 27 } usrCipModemPromptDelay OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay" --CONFIGURABLE ::= { usrCipModemPortParamEntry 28 } usrCipModemPromptTimeout OBJECT-TYPE SYNTAX Integer32 (5..600) MAX-ACCESS read-write STATUS current DESCRIPTION " This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs" --CONFIGURABLE ::= { usrCipModemPortParamEntry 29 } usrCipModemSpecialXonXoffFlow OBJECT-TYPE SYNTAX INTEGER { disbaled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Special Xon Xoff flow control in modem control receive side" --CONFIGURABLE ::= { usrCipModemPortParamEntry 30 } usrCipModemUseDnisPool OBJECT-TYPE SYNTAX INTEGER { dnis-pool-disabled (1), dnis-pool-preferred (2), dnis-pool-required (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "User DNIS pool" --CONFIGURABLE ::= { usrCipModemPortParamEntry 31 } usrCipModemLoginTable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Login Host Table " --CONFIGURABLE ::= { usrCipModemPortParamEntry 32 } usrCipConfigFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the default name `@file://CallInitProcess.cfg' is used." ::= { usrCip 25 } -- Modem Group Interface Table usrCipModemGroupInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPModemGroupInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the list of interfaces that belong to a particular modem group." ::= { usrCip 26 } usrCipModemGroupInterfaceEntry OBJECT-TYPE SYNTAX USRCIPModemGroupInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a serial interface." INDEX { usrCipModemGroupInterfaceGroupName, usrCipModemGroupInterfaceName } ::= {usrCipModemGroupInterfaceTable 1} USRCIPModemGroupInterfaceEntry ::= SEQUENCE { usrCipModemGroupInterfaceName DisplayString, usrCipModemGroupInterfaceStatus INTEGER, usrCipModemGroupInterfaceGroupName DisplayString } usrCipModemGroupInterfaceGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Group name that this interface belongs to." ::= { usrCipModemGroupInterfaceEntry 1 } usrCipModemGroupInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier of a modem group." --CONFIGURABLE ::= { usrCipModemGroupInterfaceEntry 2 } usrCipModemGroupInterfaceStatus OBJECT-TYPE SYNTAX INTEGER { add(0), delete(1), active(2), inactive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status could be add or delete the group member specified in the usrCipGroupMembers MIB." --CONFIGURABLE ::= { usrCipModemGroupInterfaceEntry 3 } usrCipGlobalCallType OBJECT-TYPE SYNTAX INTEGER { pptp(1),l2tp(3),none(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Global Call Type determiner . " --CONFIGURABLE ::= { usrCip 27 } usrCipSingleLevelPrompting OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, Login/Network users are presented with the HiPer prompt, by-passing the initial Login/Network prompt (def: disabled)." --CONFIGURABLE ::= { usrCip 28 } usrCipCfmChatScriptFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of chat script table." ::= { usrCip 29 } usrCipChatScriptTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPChatScriptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the chatscript names." ::= { usrCip 30 } usrCIPChatScriptEntry OBJECT-TYPE SYNTAX USRCIPChatScriptEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a chat script." INDEX { usrCipChatScriptName } ::= {usrCipChatScriptTable 1} USRCIPChatScriptEntry ::= SEQUENCE { usrCipChatScriptName OCTET STRING, usrCipChatScriptStatus INTEGER, usrCipChatScriptString OCTET STRING } usrCipChatScriptName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The character name for this chatscript." ::= { usrCIPChatScriptEntry 1 } usrCipChatScriptStatus OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2), verify(3), normal(4), -- Chat Script reading in progress reading(5), -- Chat Script reading in progress verifyFailed(6), -- Chat Script verification failed starting(7), -- Chat Script operation starting verifying(8) -- Chat script verification in progress } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this chatscript entry. Valid row entries in this table have the status field set to normal. The settable values are normal and delete. If the instance is in the table and the status is starting/reading, this will be an add operation." --CONFIGURABLE ::= { usrCIPChatScriptEntry 2 } usrCipChatScriptString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Chat script buffer" ::= { usrCIPChatScriptEntry 3 } usrCipDNISAuthFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the switch to enable/disable DNIS based call-authorization" --CONFIGURABLE ::= { usrCip 31 } usrCipDNISAuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Password for the DNIS authorization request being sent out" --CONFIGURABLE ::= { usrCip 32 } usrCipBannerFileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is file name for port banner file, value zero if none." --CONFIGURABLE ::= { usrCip 33 } usrCipAutoAnswerFlag OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the switch to enable/disable the Auto Answering of Modem-Sharing-Dialout Calls" --CONFIGURABLE ::= { usrCip 34 } usrSlotUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF USRSlotUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the chatscript names." ::= { usrCip 35 } usrSlotUtilizationEntry OBJECT-TYPE SYNTAX USRSlotUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to a chat script." INDEX { usrSlotIndex } ::= {usrSlotUtilizationTable 1} USRSlotUtilizationEntry ::= SEQUENCE { usrSlotIndex Integer32, usrSlotId Integer32, usrSlotActiveCalls Integer32, usrSlotNumberOfPorts Integer32, usrSlotUtilization Integer32 } usrSlotIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The slot index." ::= { usrSlotUtilizationEntry 1 } usrSlotId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The slot number in human readable format where proper offset is computed." ::= { usrSlotUtilizationEntry 2 } usrSlotActiveCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active calls on that slot at that instant." ::= { usrSlotUtilizationEntry 3 } usrSlotNumberOfPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports on that slot." ::= { usrSlotUtilizationEntry 4 } usrSlotUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percent utilization of that slot. This is computed as number of active calls on that slot divided by the number of ports on that slot." ::= { usrSlotUtilizationEntry 5 } usrCipTotalCalls OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls on the chassis." ::= { usrCip 36 } usrCipTotalAvailablePorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ports on the chassis." ::= { usrCip 37 } usrCipTotalChassisUtilization OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent utilization of all ports on the chassis." ::= { usrCip 38 } usrCipCallsInLast24Hours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls in last 24 hours." ::= { usrCip 39 } usrCipDialinAccessManageUser OBJECT-TYPE SYNTAX INTEGER { disabled(2), enabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "No Manage user dialin access" --CONFIGURABLE ::= { usrCip 40 } -- CIP login table definition. An interface pointing to this table -- use the login host ip address and login port from the table. usrCipCfmLoginTableFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This flag triggers a save of cip login table." ::= { usrCip 69 } usrCipLoginTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrCipLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { usrCip 70 } usrCipLoginEntry OBJECT-TYPE SYNTAX UsrCipLoginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { usrCipLoginListName, usrCipLoginPref } ::= { usrCipLoginTable 1 } UsrCipLoginEntry ::= SEQUENCE { usrCipLoginListName OCTET STRING, usrCipLoginPref Integer32, usrCipLoginIpAddress IpAddress, usrCipLoginPort Integer32, usrCipLoginListNameForPrint OCTET STRING, usrCipLoginEntryDelete Integer32 } usrCipLoginListName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..9)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the cip login list name" ::= { usrCipLoginEntry 1 } usrCipLoginPref OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "login preference index" ::= { usrCipLoginEntry 2 } usrCipLoginIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the cip login host ip address" --CONFIGURABLE ::= { usrCipLoginEntry 3 } usrCipLoginPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is the cip login host port" --CONFIGURABLE ::= { usrCipLoginEntry 4 } usrCipLoginListNameForPrint OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..9)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the cip login list name. Added the second mib to print the login table name. The first mib is an index to table" --CONFIGURABLE ::= { usrCipLoginEntry 5 } usrCipLoginEntryDelete OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this entry will delete the particular table" ::= { usrCipLoginEntry 6 } usrCipModemUtilizationStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPModemUtilizationStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The active calls during every hour gives 24 samples." ::= { usrCip 41 } usrCipModemUtilizationStatisticsEntry OBJECT-TYPE SYNTAX USRCIPModemUtilizationStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP PPP Modem Utilizationstatistics" INDEX { usrCipModemUtilizationStatisticsIndex } ::= { usrCipModemUtilizationStatisticsTable 1 } USRCIPModemUtilizationStatisticsEntry ::= SEQUENCE { usrCipModemUtilizationStatisticsIndex Integer32, usrCipModemUtilization Counter32, usrCipCallsPerHour Counter32, usrCipPacketsForwadedPerHour Counter32 } usrCipModemUtilizationStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the call duration samples." ::= { usrCipModemUtilizationStatisticsEntry 1 } usrCipModemUtilization OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage utilization of the modems per hour." ::= { usrCipModemUtilizationStatisticsEntry 2 } usrCipCallsPerHour OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls per hour." ::= { usrCipModemUtilizationStatisticsEntry 3 } usrCipPacketsForwadedPerHour OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets forwarded per hour." ::= { usrCipModemUtilizationStatisticsEntry 4 } usrCipCallStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPCallStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Cip Call statistics for all the calls coming in." ::= { usrCip 42 } usrCipCallStatisticsEntry OBJECT-TYPE SYNTAX USRCIPCallStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP Call statistics" INDEX { usrCipCallStatisticsIndex } ::= { usrCipCallStatisticsTable 1 } USRCIPCallStatisticsEntry ::= SEQUENCE { usrCipCallStatisticsIndex Integer32, usrCipCallStatisticsOnDemandConns Counter32, usrCipCallStatisticsContinuousConns Counter32, usrCipCallStatisticsDialBackConns Counter32, usrCipCallStatisticsManualConns Counter32, usrCipCallStatisticsTimedConns Counter32, usrCipCallStatisticsSharedConns Counter32, usrCipCallStatisticsDialInConns Counter32, usrCipCallStatisticsBondConns Counter32, usrCipCallStatisticsDedicatedConns Counter32, usrCipCallStatisticsAnalogCalls Counter32, usrCipCallStatisticsIsdnCalls Counter32, usrCipCallStatisticsDialInUsers Counter32, usrCipCallStatisticsNetworkUsers Counter32, usrCipCallStatisticsCounterResetTime DateAndTime, usrCipCallStatisticsIs95cPppConns Counter32, usrCipCallStatisticsEvdoPppConns Counter32 } usrCipCallStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the call statistics display. they are 0-now, 1-max, 2-today & 3-total." ::= { usrCipCallStatisticsEntry 1 } usrCipCallStatisticsOnDemandConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of On Demand connections." ::= { usrCipCallStatisticsEntry 2 } usrCipCallStatisticsContinuousConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Continuous connections." ::= { usrCipCallStatisticsEntry 3 } usrCipCallStatisticsDialBackConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dial back connections." ::= { usrCipCallStatisticsEntry 4 } usrCipCallStatisticsManualConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of manual connections." ::= { usrCipCallStatisticsEntry 5 } usrCipCallStatisticsTimedConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Timed connections." ::= { usrCipCallStatisticsEntry 6 } usrCipCallStatisticsSharedConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Shared connections." ::= { usrCipCallStatisticsEntry 7 } usrCipCallStatisticsDialInConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dial-In connections." ::= { usrCipCallStatisticsEntry 8 } usrCipCallStatisticsBondConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bond connections." ::= { usrCipCallStatisticsEntry 9 } usrCipCallStatisticsDedicatedConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Dedicated connections." ::= { usrCipCallStatisticsEntry 10 } usrCipCallStatisticsAnalogCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of analog calls." ::= { usrCipCallStatisticsEntry 11 } usrCipCallStatisticsIsdnCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of digital calls." ::= { usrCipCallStatisticsEntry 12 } usrCipCallStatisticsDialInUsers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of login users." ::= { usrCipCallStatisticsEntry 13 } usrCipCallStatisticsNetworkUsers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Network users." ::= { usrCipCallStatisticsEntry 14 } usrCipCallStatisticsCounterResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Time the call statistics counters were last reset to value zero." ::= { usrCipCallStatisticsEntry 15 } usrCipCallStatisticsIs95cPppConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter of IS-95C PPP Connections." ::= { usrCipCallStatisticsEntry 16 } usrCipCallStatisticsEvdoPppConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter of EVDO PPP Connections." ::= { usrCipCallStatisticsEntry 17 } usrCipCallDurationStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPCallDurationStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Number of calls which lasted 1, 2, 5, 10, 20, 60, 120, 360, 720, 1440, 2160 and 3600 minutes & over. This gives 12 samples." ::= { usrCip 43 } usrCipCallDurationStatisticsEntry OBJECT-TYPE SYNTAX USRCIPCallDurationStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP Call Duration statistics" INDEX { usrCipCallDurationStatisticsIndex } ::= { usrCipCallDurationStatisticsTable 1 } USRCIPCallDurationStatisticsEntry ::= SEQUENCE { usrCipCallDurationStatisticsIndex Integer32, usrCipCallDurations Counter32 } usrCipCallDurationStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the call duration samples." ::= { usrCipCallDurationStatisticsEntry 1 } usrCipCallDurations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls for each samples." ::= { usrCipCallDurationStatisticsEntry 2 } usrCipPPPCompressionStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPPPPCompressionStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Cip PPP Compression statistics for all the calls coming in." ::= { usrCip 44 } usrCipPPPCompressionStatisticsEntry OBJECT-TYPE SYNTAX USRCIPPPPCompressionStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP PPPCompression statistics" INDEX { usrCipPPPCompressionStatisticsIndex } ::= { usrCipPPPCompressionStatisticsTable 1 } USRCIPPPPCompressionStatisticsEntry ::= SEQUENCE { usrCipPPPCompressionStatisticsIndex Integer32, usrCipPPPCompressionStatisticsMicrosoftComp Counter32, usrCipPPPCompressionStatisticsAscendComp Counter32, usrCipPPPCompressionStatisticsStackComp Counter32, usrCipPPPCompressionStatisticsPPPUsers Counter32, usrCipPPPCompressionStatisticsPPPBundlesFormed Counter32, usrCipPPPCompressionStatisticsMrruNegotiated Counter32, usrCipPPPCompressionStatisticsIPXNegotiated Counter32, usrCipPPPCompressionStatisticsIPNegotiated Counter32, usrCipPPPCompressionStatisticsVJCompression Counter32, usrCipPPPCompressionStatisticsBACPNegotiated Counter32, usrCipPPPCompressionStatisticsCHAPAuthenticated Counter32, usrCipPPPCompressionStatisticsPAPAuthenticated Counter32, usrCipPPPCompressionStatisticsMSCHAPAuthenticated Counter32, usrCipPPPCompressionStatisticsEAPAuthenticated Counter32, usrCipPPPCompressionStatisticsResetTime DateAndTime, usrCipPPPCompressionStatisticsDeflateComp Counter32, usrCipPPPStatisticsConnInitiated Counter32, usrCipPPPStatisticsConnRenegotiated Counter32, usrCipPPPStatisticsConnSuccess Counter32, usrCipPPPStatisticsConnFailed Counter32, usrCipPPPStatisticsConnRelease Counter32, usrCipPPPStatisticsConnMobileRelease Counter32, usrCipPPPStatisticsConnPDSNRelease Counter32, usrCipPPPStatisticsConnLCPFailed Counter32, usrCipPPPStatisticsConnAuthFailed Counter32, usrCipPPPStatisticsConnIPCPFailed Counter32, usrCipPPPStatisticsConnRenegPDSN Counter32, usrCipPPPStatisticsConnRenegMobile Counter32, usrCipPPPStatisticsConnRenegIPMismatch Counter32, usrCipPPPStatisticsConnRenegOtherReasons Counter32, usrCipPPPStatisticsConnCHAPAuthSuccess Counter32, usrCipPPPStatisticsConnCHAPAuthFailed Counter32, usrCipPPPStatisticsConnPAPAuthSuccess Counter32, usrCipPPPStatisticsConnPAPAuthFailed Counter32, usrCipPPPStatisticsConnMSCHAPAuthSuccess Counter32, usrCipPPPStatisticsConnMSCHAPAuthFailed Counter32, usrCipPPPStatisticsConnEAPAuthSuccess Counter32, usrCipPPPStatisticsConnEAPAuthFailed Counter32, usrCipPPPStatisticsNumLCPFailMaxRetx Counter32, usrCipPPPStatisticsNumLCPFailUnsupport Counter32, usrCipPPPStatisticsNumLCPFailUnknown Counter32, usrCipPPPStatisticsNumIPCPFailMaxRetx Counter32, usrCipPPPStatisticsNumIPCPFailUnsupport Counter32, usrCipPPPStatisticsNumIPCPFailUnknown Counter32, usrCipPPPStatisticsConnLCPEntered Counter32, usrCipPPPStatisticsConnAuthEntered Counter32, usrCipPPPStatisticsConnIPCPEntered Counter32, usrCipPPPStatisticsTotalCallsWithCompression Counter32, usrCipPPPStatisticsConnsFailedBeforeLcp Counter32, usrCipPPPStatisticsConnsReachedLcpOpen Counter32, usrCipPPPStatisticsConnsAuthSkipped Counter32, usrCipPPPStatisticsConnsCHAPAuthAborted Counter32, usrCipPPPStatisticsConnsPAPAuthAborted Counter32, usrCipPPPStatisticsConnsMSCHAPAuthAborted Counter32, usrCipPPPStatisticsConnsEAPAuthAborted Counter32, usrCipPPPStatisticsConnsAuthPassed Counter32, usrCipPPPStatisticsConnsRenegotiatedAfterSetup Counter32 } usrCipPPPCompressionStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the PPPCompression statistics display." ::= { usrCipPPPCompressionStatisticsEntry 1 } usrCipPPPCompressionStatisticsMicrosoftComp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls uses microsoft compression." ::= { usrCipPPPCompressionStatisticsEntry 2 } usrCipPPPCompressionStatisticsAscendComp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls uses ascend compression.." ::= { usrCipPPPCompressionStatisticsEntry 3 } usrCipPPPCompressionStatisticsStackComp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls uses stack compression.." ::= { usrCipPPPCompressionStatisticsEntry 4 } usrCipPPPCompressionStatisticsPPPUsers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP users.." ::= { usrCipPPPCompressionStatisticsEntry 5 } usrCipPPPCompressionStatisticsPPPBundlesFormed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP Bundles formed.." ::= { usrCipPPPCompressionStatisticsEntry 6 } usrCipPPPCompressionStatisticsMrruNegotiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls negotiated MRRU for making a multi-link.." ::= { usrCipPPPCompressionStatisticsEntry 7 } usrCipPPPCompressionStatisticsIPXNegotiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls negotiated IPX." ::= { usrCipPPPCompressionStatisticsEntry 8 } usrCipPPPCompressionStatisticsIPNegotiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls negotiated IP." ::= { usrCipPPPCompressionStatisticsEntry 9 } usrCipPPPCompressionStatisticsVJCompression OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls negotiated VJ Compression" ::= { usrCipPPPCompressionStatisticsEntry 10 } usrCipPPPCompressionStatisticsBACPNegotiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls negotiated BAP." ::= { usrCipPPPCompressionStatisticsEntry 11 } usrCipPPPCompressionStatisticsCHAPAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls attempted authentication using CHAP." ::= { usrCipPPPCompressionStatisticsEntry 12 } usrCipPPPCompressionStatisticsPAPAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls attempted authentication using PAP." ::= { usrCipPPPCompressionStatisticsEntry 13 } usrCipPPPCompressionStatisticsMSCHAPAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls attempted authentication using MSCHAP." ::= { usrCipPPPCompressionStatisticsEntry 14 } usrCipPPPCompressionStatisticsEAPAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls attempted authentication using EAP." ::= { usrCipPPPCompressionStatisticsEntry 15 } usrCipPPPCompressionStatisticsResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Time the PPP statistics counters were last reset to value zero." ::= { usrCipPPPCompressionStatisticsEntry 16 } usrCipPPPCompressionStatisticsDeflateComp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls uses Deflate compression.." ::= { usrCipPPPCompressionStatisticsEntry 17 } usrCipPPPStatisticsConnInitiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls initiated." ::= { usrCipPPPCompressionStatisticsEntry 18 } usrCipPPPStatisticsConnRenegotiated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls renegotiated." ::= { usrCipPPPCompressionStatisticsEntry 19 } usrCipPPPStatisticsConnSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls succeeded." ::= { usrCipPPPCompressionStatisticsEntry 20 } usrCipPPPStatisticsConnFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed." ::= { usrCipPPPCompressionStatisticsEntry 21 } usrCipPPPStatisticsConnRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls released." ::= { usrCipPPPCompressionStatisticsEntry 22 } usrCipPPPStatisticsConnMobileRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls released by Mobile." ::= { usrCipPPPCompressionStatisticsEntry 23 } usrCipPPPStatisticsConnPDSNRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls released by PDSN." ::= { usrCipPPPCompressionStatisticsEntry 24 } usrCipPPPStatisticsConnLCPFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed at LCP state." ::= { usrCipPPPCompressionStatisticsEntry 25 } usrCipPPPStatisticsConnAuthFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed at authentication state." ::= { usrCipPPPCompressionStatisticsEntry 26 } usrCipPPPStatisticsConnIPCPFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed at IPCP state." ::= { usrCipPPPCompressionStatisticsEntry 27 } usrCipPPPStatisticsConnRenegPDSN OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls renegotiated by PDSN." ::= { usrCipPPPCompressionStatisticsEntry 28 } usrCipPPPStatisticsConnRenegMobile OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls renegotiated by Mobile." ::= { usrCipPPPCompressionStatisticsEntry 29 } usrCipPPPStatisticsConnRenegIPMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls renegotiated due to IP mismatch." ::= { usrCipPPPCompressionStatisticsEntry 30 } usrCipPPPStatisticsConnRenegOtherReasons OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls renegotiated due to some reason." ::= { usrCipPPPCompressionStatisticsEntry 31 } usrCipPPPStatisticsConnCHAPAuthSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls successfully authenticated with CHAP." ::= { usrCipPPPCompressionStatisticsEntry 32 } usrCipPPPStatisticsConnCHAPAuthFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed in CHAP authentication." ::= { usrCipPPPCompressionStatisticsEntry 33 } usrCipPPPStatisticsConnPAPAuthSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls successfully authenticated with PAP." ::= { usrCipPPPCompressionStatisticsEntry 34 } usrCipPPPStatisticsConnPAPAuthFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed in PAP authentication." ::= { usrCipPPPCompressionStatisticsEntry 35 } usrCipPPPStatisticsConnMSCHAPAuthSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls successfully authenticated with MSCHAP." ::= { usrCipPPPCompressionStatisticsEntry 36 } usrCipPPPStatisticsConnMSCHAPAuthFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed in MSCHAP authentication." ::= { usrCipPPPCompressionStatisticsEntry 37 } usrCipPPPStatisticsConnEAPAuthSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls successfully authenticated with EAP." ::= { usrCipPPPCompressionStatisticsEntry 38 } usrCipPPPStatisticsConnEAPAuthFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed in EAP authentication." ::= { usrCipPPPCompressionStatisticsEntry 39 } usrCipPPPStatisticsNumLCPFailMaxRetx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed after maximum retries while negotiating LCP." ::= { usrCipPPPCompressionStatisticsEntry 40 } usrCipPPPStatisticsNumLCPFailUnsupport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed due to unsupported attribute while negotiating LCP." ::= { usrCipPPPCompressionStatisticsEntry 41 } usrCipPPPStatisticsNumLCPFailUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed due to unknown reason while negotiating LCP." ::= { usrCipPPPCompressionStatisticsEntry 42 } usrCipPPPStatisticsNumIPCPFailMaxRetx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed after maximum retries while negotiating IPCP." ::= { usrCipPPPCompressionStatisticsEntry 43 } usrCipPPPStatisticsNumIPCPFailUnsupport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed due to unsupported attribute while negotiating IPCP." ::= { usrCipPPPCompressionStatisticsEntry 44 } usrCipPPPStatisticsNumIPCPFailUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed due to unknown reason while negotiating IPCP." ::= { usrCipPPPCompressionStatisticsEntry 45 } usrCipPPPStatisticsConnLCPEntered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls which entered LCP state." ::= { usrCipPPPCompressionStatisticsEntry 46 } usrCipPPPStatisticsConnAuthEntered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls which entered authentication state." ::= { usrCipPPPCompressionStatisticsEntry 47 } usrCipPPPStatisticsConnIPCPEntered OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls which entered IPCP state." ::= { usrCipPPPCompressionStatisticsEntry 48 } usrCipPPPStatisticsTotalCallsWithCompression OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PPP calls which used compression." ::= { usrCipPPPCompressionStatisticsEntry 49 } usrCipPPPStatisticsConnsFailedBeforeLcp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed before LCP negotiated even started. An example is running out of memmory or some other internal failure before LCP begins." ::= { usrCipPPPCompressionStatisticsEntry 50 } usrCipPPPStatisticsConnsReachedLcpOpen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls that have successfully negotiated the LCP options, have reached the LCP Open stane, and have proceeded to the next PPP phase (usually Authentication)." ::= { usrCipPPPCompressionStatisticsEntry 51 } usrCipPPPStatisticsConnsAuthSkipped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls that have negotiated to have no authentication protocol, have reached the LCP Open state, and therefore have skipped the PPP Authentication phase, and proceeded directly to the PPP Network phase." ::= { usrCipPPPCompressionStatisticsEntry 52 } usrCipPPPStatisticsConnsCHAPAuthAborted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed during CHAP authentication at a different layer than CHAP authentication prior to CHAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server." ::= { usrCipPPPCompressionStatisticsEntry 53 } usrCipPPPStatisticsConnsPAPAuthAborted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed during PAP authentication at a different layer than PAP authentication prior to PAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server." ::= { usrCipPPPCompressionStatisticsEntry 54 } usrCipPPPStatisticsConnsMSCHAPAuthAborted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed during MSCHAP authentication at a different layer than MSCHAP authentication prior to MSCHAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server." ::= { usrCipPPPCompressionStatisticsEntry 55 } usrCipPPPStatisticsConnsEAPAuthAborted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls failed during EAP authentication at a different layer than EAP authentication prior to EAP authentication reaching a pass/fail verdict. Examples are receiving a LCP Term Req or physical layer down while waiting for the auth reply from a RADIUS server." ::= { usrCipPPPCompressionStatisticsEntry 56 } usrCipPPPStatisticsConnsAuthPassed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls that have successfully passed the authentication phase, and have proceeded to the PPP Network phase." ::= { usrCipPPPCompressionStatisticsEntry 57 } usrCipPPPStatisticsConnsRenegotiatedAfterSetup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PPP calls that have initiated renegotiation after PPP link reached the fully setup state." ::= { usrCipPPPCompressionStatisticsEntry 58 } usrCipSpeedStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPSpeedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the CIP Speed statistics for all the calls coming in." ::= { usrCip 45 } usrCipSpeedStatisticsEntry OBJECT-TYPE SYNTAX USRCIPSpeedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP Speed statistics of the incoming calls." INDEX { usrCipSpeedStatisticsIndex } ::= { usrCipSpeedStatisticsTable 1 } USRCIPSpeedStatisticsEntry ::= SEQUENCE { usrCipSpeedStatisticsIndex Integer32, usrCipSpeedStatisticsSpeed300 Counter32, usrCipSpeedStatisticsSpeed1200 Counter32, usrCipSpeedStatisticsSpeed2400 Counter32, usrCipSpeedStatisticsSpeed4800 Counter32, usrCipSpeedStatisticsSpeed7200 Counter32, usrCipSpeedStatisticsSpeed9600 Counter32, usrCipSpeedStatisticsSpeed12000 Counter32, usrCipSpeedStatisticsSpeed14400 Counter32, usrCipSpeedStatisticsSpeed16800 Counter32, usrCipSpeedStatisticsSpeed19200 Counter32, usrCipSpeedStatisticsSpeed21600 Counter32, usrCipSpeedStatisticsSpeed28800 Counter32, usrCipSpeedStatisticsSpeed38400 Counter32, usrCipSpeedStatisticsSpeed57600 Counter32, usrCipSpeedStatisticsSpeed115200 Counter32, usrCipSpeedStatisticsSpeed288000 Counter32, usrCipSpeedStatisticsSpeed751200 Counter32, usrCipSpeedStatisticsSpeed120075 Counter32, usrCipSpeedStatisticsSpeed24000 Counter32, usrCipSpeedStatisticsSpeed26400 Counter32, usrCipSpeedStatisticsSpeed31200 Counter32, usrCipSpeedStatisticsSpeed33600 Counter32, usrCipSpeedStatisticsSpeed32000 Counter32, usrCipSpeedStatisticsSpeed36000 Counter32, usrCipSpeedStatisticsSpeed40000 Counter32, usrCipSpeedStatisticsSpeed44000 Counter32, usrCipSpeedStatisticsSpeed48000 Counter32, usrCipSpeedStatisticsSpeed49333 Counter32, usrCipSpeedStatisticsSpeed50666 Counter32, usrCipSpeedStatisticsSpeed52000 Counter32, usrCipSpeedStatisticsSpeed53333 Counter32, usrCipSpeedStatisticsSpeed54666 Counter32, usrCipSpeedStatisticsSpeed56000 Counter32, usrCipSpeedStatisticsSpeed57333 Counter32, usrCipSpeedStatisticsSpeed58666 Counter32, usrCipSpeedStatisticsSpeed60000 Counter32, usrCipSpeedStatisticsSpeed61333 Counter32, usrCipSpeedStatisticsSpeed64000 Counter32, usrCipSpeedStatisticsResetTime DateAndTime } usrCipSpeedStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the speed statistics display. they are 0-now & 1-total." ::= { usrCipSpeedStatisticsEntry 1 } usrCipSpeedStatisticsSpeed300 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 300." ::= { usrCipSpeedStatisticsEntry 2 } usrCipSpeedStatisticsSpeed1200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 1200." ::= { usrCipSpeedStatisticsEntry 3 } usrCipSpeedStatisticsSpeed2400 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 2400." ::= { usrCipSpeedStatisticsEntry 4 } usrCipSpeedStatisticsSpeed4800 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 4800." ::= { usrCipSpeedStatisticsEntry 5 } usrCipSpeedStatisticsSpeed7200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 7200." ::= { usrCipSpeedStatisticsEntry 6 } usrCipSpeedStatisticsSpeed9600 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 9600." ::= { usrCipSpeedStatisticsEntry 7 } usrCipSpeedStatisticsSpeed12000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 12000." ::= { usrCipSpeedStatisticsEntry 8 } usrCipSpeedStatisticsSpeed14400 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 14400." ::= { usrCipSpeedStatisticsEntry 9 } usrCipSpeedStatisticsSpeed16800 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 16800." ::= { usrCipSpeedStatisticsEntry 10 } usrCipSpeedStatisticsSpeed19200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 19200." ::= { usrCipSpeedStatisticsEntry 11 } usrCipSpeedStatisticsSpeed21600 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 21600." ::= { usrCipSpeedStatisticsEntry 12 } usrCipSpeedStatisticsSpeed28800 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 28800." ::= { usrCipSpeedStatisticsEntry 13 } usrCipSpeedStatisticsSpeed38400 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 38400." ::= { usrCipSpeedStatisticsEntry 14 } usrCipSpeedStatisticsSpeed57600 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 57600." ::= { usrCipSpeedStatisticsEntry 15 } usrCipSpeedStatisticsSpeed115200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 115200." ::= { usrCipSpeedStatisticsEntry 16 } usrCipSpeedStatisticsSpeed288000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 288000." ::= { usrCipSpeedStatisticsEntry 17 } usrCipSpeedStatisticsSpeed751200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 75_1200." ::= { usrCipSpeedStatisticsEntry 18 } usrCipSpeedStatisticsSpeed120075 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 1200_75." ::= { usrCipSpeedStatisticsEntry 19 } usrCipSpeedStatisticsSpeed24000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 24000." ::= { usrCipSpeedStatisticsEntry 20 } usrCipSpeedStatisticsSpeed26400 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 26400." ::= { usrCipSpeedStatisticsEntry 21 } usrCipSpeedStatisticsSpeed31200 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 31200." ::= { usrCipSpeedStatisticsEntry 22 } usrCipSpeedStatisticsSpeed33600 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 33600." ::= { usrCipSpeedStatisticsEntry 23 } usrCipSpeedStatisticsSpeed32000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 32000." ::= { usrCipSpeedStatisticsEntry 24 } usrCipSpeedStatisticsSpeed36000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 36000." ::= { usrCipSpeedStatisticsEntry 25 } usrCipSpeedStatisticsSpeed40000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 40000." ::= { usrCipSpeedStatisticsEntry 26 } usrCipSpeedStatisticsSpeed44000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 44000." ::= { usrCipSpeedStatisticsEntry 27 } usrCipSpeedStatisticsSpeed48000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 48000." ::= { usrCipSpeedStatisticsEntry 28 } usrCipSpeedStatisticsSpeed49333 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 49333." ::= { usrCipSpeedStatisticsEntry 29 } usrCipSpeedStatisticsSpeed50666 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 50666." ::= { usrCipSpeedStatisticsEntry 30 } usrCipSpeedStatisticsSpeed52000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 52000." ::= { usrCipSpeedStatisticsEntry 31 } usrCipSpeedStatisticsSpeed53333 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 53333." ::= { usrCipSpeedStatisticsEntry 32 } usrCipSpeedStatisticsSpeed54666 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 54666." ::= { usrCipSpeedStatisticsEntry 33 } usrCipSpeedStatisticsSpeed56000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 56000." ::= { usrCipSpeedStatisticsEntry 34 } usrCipSpeedStatisticsSpeed57333 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 57333." ::= { usrCipSpeedStatisticsEntry 35 } usrCipSpeedStatisticsSpeed58666 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 58666." ::= { usrCipSpeedStatisticsEntry 36 } usrCipSpeedStatisticsSpeed60000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 60000." ::= { usrCipSpeedStatisticsEntry 37 } usrCipSpeedStatisticsSpeed61333 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with a speed of 61333." ::= { usrCipSpeedStatisticsEntry 38 } usrCipSpeedStatisticsSpeed64000 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with speed of 64000." ::= { usrCipSpeedStatisticsEntry 39 } usrCipSpeedStatisticsResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Time the Speed statistics counters were last reset to value zero." ::= { usrCipSpeedStatisticsEntry 40 } usrCipPacketSizeStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPPacketSizeStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Size of the PPP packets in each direction. packet size of every 64 bytes. ie 0-64, 64-128, 128-192,, 2048. Which gives 32 samples." ::= { usrCip 46 } usrCipPacketSizeStatisticsEntry OBJECT-TYPE SYNTAX USRCIPPacketSizeStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP PPP packet size statistics" INDEX { usrCipPacketSizeStatisticsIndex } ::= { usrCipPacketSizeStatisticsTable 1 } USRCIPPacketSizeStatisticsEntry ::= SEQUENCE { usrCipPacketSizeStatisticsIndex Integer32, usrCipPacketUpLoadSizes Counter32, usrCipPacketDownLoadSizes Counter32 } usrCipPacketSizeStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the PPP packet size samples." ::= { usrCipPacketSizeStatisticsEntry 1 } usrCipPacketUpLoadSizes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The PPP Upload packet size samples." ::= { usrCipPacketSizeStatisticsEntry 2 } usrCipPacketDownLoadSizes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The PPP Download packet size samples." ::= { usrCipPacketSizeStatisticsEntry 3 } usrCipModemDisconectReasonNoError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason no_error." ::= { usrCip 47 } usrCipModemDisconectReasonNoCarrier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason no_carrier." ::= { usrCip 48 } usrCipModemDisconectReasonNoDsr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason no_dsr." ::= { usrCip 49 } usrCipModemDisconectReasonTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason timeout." ::= { usrCip 50 } usrCipModemDisconectReasonReset OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason reset." ::= { usrCip 51 } usrCipModemDisconectReasonCallDropReq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason call_drop_req." ::= { usrCip 52 } usrCipModemDisconectReasonIdleTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason idle_timeout." ::= { usrCip 53 } usrCipModemDisconectReasonSessionTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason session_timeout." ::= { usrCip 54 } usrCipModemDisconectReasonUserReqDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason user_req_drop." ::= { usrCip 55 } usrCipModemDisconectReasonHostReqDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason host_req_drop." ::= { usrCip 56 } usrCipModemDisconectReasonServiceInterruption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason service_interruption." ::= { usrCip 57 } usrCipModemDisconectReasonServiceUnavailable OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason service_unavailable." ::= { usrCip 58 } usrCipModemDisconectReasonUserInputError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason user_input_error." ::= { usrCip 59 } usrCipModemDisconectReasonNasDropForCallback OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason nas_drop_for_callback." ::= { usrCip 60 } usrCipModemDisconectReasonnasDropMiscNonError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason nas_drop_misc_non_error." ::= { usrCip 61 } usrCipModemDisconectReasonNasInternalError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls with disconnect reason nas_internal_error." ::= { usrCip 62 } usrCipStatisticsResetCallDuration OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Daily time we reset all the call statistics counters." ::= { usrCip 63 } usrCipStatisticsResetPPPUploadPackets OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Daily time we reset all the ppp upload packets counters." ::= { usrCip 64 } usrCipStatisticsResetPPPDownloadPackets OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Daily time we reset all the PPP download packets counters." ::= { usrCip 65 } usrCipStatisticsResetCallDisconnectReasons OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Daily time we reset all the call disconnect reason counters." ::= { usrCip 66 } usrCipStatistics100PercentModemUtilization OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of minutes at modems 100 % utilization." ::= { usrCip 67 } usrCipModemCompressionStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF USRCIPModemCompressionStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the Modem Compression statistics for all the calls coming in." ::= { usrCip 68 } usrCipModemCompressionStatisticsEntry OBJECT-TYPE SYNTAX USRCIPModemCompressionStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIP Modem Compression statistics" INDEX { usrCipModemCompressionStatisticsIndex } ::= { usrCipModemCompressionStatisticsTable 1 } USRCIPModemCompressionStatisticsEntry ::= SEQUENCE { usrCipModemCompressionStatisticsIndex Integer32, usrCipModemCompressionStatisticsModemCompNone Counter32, usrCipModemCompressionStatisticsModemCompV42Bis Counter32, usrCipModemCompressionStatisticsModemCompMnp5 Counter32, usrCipModemCompressionStatisticsResetTime DateAndTime } usrCipModemCompressionStatisticsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the Modem Compression statistics display. they are 0-now& 1-total." ::= { usrCipModemCompressionStatisticsEntry 1 } usrCipModemCompressionStatisticsModemCompNone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls that has No Modem Compression." ::= { usrCipModemCompressionStatisticsEntry 2 } usrCipModemCompressionStatisticsModemCompV42Bis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls that has V_42Bis modem compression." ::= { usrCipModemCompressionStatisticsEntry 3 } usrCipModemCompressionStatisticsModemCompMnp5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls that has mnp5 modem compression." ::= { usrCipModemCompressionStatisticsEntry 4 } usrCipModemCompressionStatisticsResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "Time the Speed statistics counters were last reset to value zero." ::= { usrCipModemCompressionStatisticsEntry 5 } usrCipTelnetConnectionTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "For host rotation a configurable connection timeout" --CONFIGURABLE ::= { usrCip 71 } usrCipTelnetBuffering OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "For a login user, whether CIP to TELNET buffering should be turned on or off flag" --CONFIGURABLE ::= { usrCip 72 } usrCipPDSNAcctStyle OBJECT-TYPE SYNTAX INTEGER { defaultPDSNStyle(1), emulateIWUStyle(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This flag determines whether the PDSN emulates the IWU while sending the interim accounting packets." DEFVAL { defaultPDSNStyle } --CONFIGURABLE ::= { usrCip 77 } usrCipPppTotalReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released for any reason after the PPP session was fully set up, i.e. has successfully exited the IPCP stage and was in the operations stage and then got released. This counter was added for Wireless IP to monitor PPP over the A10 R-P (Radio Node - PDSN) link over which runs multiple PPP over GRE over IP." ::= { usrCip 78 } usrCipPppUserReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released by the user (LCP Term Req). This counter was added for Wireless IP to track the number of Mobile initiated releases which occured after connection was fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released." ::= { usrCip 79 } usrCipPppRpReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released via the 3G R-P interface. This counter was added for Wireless IP to track the number of RAN initiated releases which occured after the PPP connection was fully setup (after IPCP). The RAN (Radio Access Node) aka RN (Radio Node) aka RNN (Radio Network Node) aka PCF (Packet Communication Facility) initiates the release by de-registering that mobile PPP connection by sending a Mobile-IP-like Registration Request with a lifetime of zero for that mobile over the 3GPP2 A11 R-P interface. Note that the PPP session itself is carried over a GRE tunnel that forms the A10 portion of the 3GPP2 R-P interface." ::= { usrCip 80 } usrCipPppFaReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released by request of the FA (Mobile IP Foreign Agent) process in this PDSN. This is only counted when the PPP session is fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released." ::= { usrCip 81 } usrCipPppFacnReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released by request of the FACN (Foreign Agent Control Node). This typically occurs when a handoff has occured for a Mobile Station to another PDSN, and the FACN notifies us of this fact so that the PPP resources can be released faster. This is only counted when the PPP session is fully setup, i.e. has successfully exited the IPCP stage and was in the operations stage, then was released." ::= { usrCip 82 } usrCipPppLocalAdminReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released by a local administrative command. This counter was added for Wireless IP to track the number of PDSN initiated releases (Admin Command) which occured after the PPP connection was fully setup (after successful IPCP)." ::= { usrCip 83 } usrCipPppIdleTimeoutReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released due to local Idle Timeout. This counter was added for Wireless IP to track the number of PDSN initiated releases (Idle Timeout) which occured after the PPP connection was fully setup (after successful IPCP)." ::= { usrCip 84 } usrCipPppL2tpTunnelReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released locally due to attached an L2TP tunnel being released. This counter was added for Wireless IP to track the number of PDSN initiated releases (L2TP tunnel release) which occured after the L2TP connection was fully setup." ::= { usrCip 85 } usrCipPppInsufResourceReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Count of PPP sessions which got released locally due to insufficient resources. This counter was added for Wireless IP to track the number of PDSN initiated releases (Insufficient resources) which occured after the PPP connection was fully setup (successful IPCP). This unnecessary counter has been removed." ::= { usrCip 86 } usrCipPppIngressFilteringReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released locally due to PPP renegotiations triggered by Ingress Filtering. This counter was added for Wireless IP to track the number of PDSN initiated releases (Ingress Filtering) which occured after the PPP connection was fully setup (successful IPCP)." ::= { usrCip 87 } usrCipPppLocalMiscReleases OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of PPP sessions which got released locally due to miscellaneous other reasons not otherwise covered. This counter was added for Wireless IP to track the number of PDSN initiated releases (Miscellaneous Reason) which occured after the PPP connection was fully setup (successful IPCP)." ::= { usrCip 88 } usrCipCallCurrentIs95cPppConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Current Active IS-95C PPP Connections." ::= { usrCip 89 } usrCipCallActivePppConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Active PPP Connections." ::= { usrCip 90 } usrCipShortTimeBillingSolnEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the switch to enable/disable the Solution to Short Time Billing feature" DEFVAL { disabled } --CONFIGURABLE ::= { usrCip 91 } usrCipShortTimeBillingSolnTimer OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the Short Term Billing Solution Timer" DEFVAL { 5 } --CONFIGURABLE ::= { usrCip 92 } END -- End CIP-MIB definitions -- ************************************************************************ -- -- -- usr_pppml.mib - The CommWorks PPP Mult-Link MIB module -- -- Author: --