All MIBs › CXX25-MIB › x25SapSbscrRouteUsingSubAddress
x25SapSbscrRouteUsingSubAddress
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrRouteUsingSubAddress
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.99
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines if this SAP uses the subaddress field for routing. This facility applies to incoming calls only.
Each SAP can only subscribe to one of the following routing decisions:
- Route using the call user data field (object x25SapRouteUsingCUDF)
- Route using sub-address (object x25SapRouteUsingSubAddress)
- Route using the called address extension facility (object x25SapRouteUsingCAE)
Options: false (1): Not subscribed. This SAP does not look at the subaddress field for routing information.
true (2): Subscribed: This SAP uses digits found in the called address of incoming calls as the destination address for routing. The number of digits used as the subaddress is defined by object x25SapRouteAddressLength
Default Value: false (1)
Related Objects: x25SapRouteAddressLength
Configuration Changed: administrative and operative
What is x25SapSbscrRouteUsingSubAddress?
Controls whether this SAP routes incoming calls using digits from the subaddress portion of the called address (counted backward from the last digit, per x25SapRouteAddressLength), instead of the standard called address; mutually exclusive with the CUDF and CAE routing options on the same SAP. Default is false; an admin enables this to route based on an appended subaddress suffix rather than the base called number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.99 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingSubAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.99.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingSubAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.99.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrRouteUsingSubAddress OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.99 | x25SapSbscrRouteUsingSubAddress | CXX25-MIB |