All MIBs › CXX25-MIB › x25SapSbscrRouteUsingCUDF
x25SapSbscrRouteUsingCUDF
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrRouteUsingCUDF
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.98
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines if this SAP subscribes to the Call User Data facility for routing. This facility applies to incoming calls only.
Each SAP can only subscribe to one of the following routing decisions:
- Route using the call user data field (object x25SapRouteUsingCUDF)
- Route using sub-address (object x25SapRouteUsingSubAddress)
- Route using the called address extension facility (object x25SapRouteUsingCAE)
Options: false (1): Not subscribed. This SAP does not look at the call user data field for routing information.
true (2): Subscribed: This SAP uses digits found in the call user data field of incoming calls as the destination address for routing. The number of digits to be used from the call user data field is defined by object x25SapRouteAddressLength.
Default Value: false (1)
Configuration Changed: administrative and operative
What is x25SapSbscrRouteUsingCUDF?
Controls whether this SAP routes incoming calls using digits found in the Call User Data field rather than the called address, with the number of digits used set by x25SapRouteAddressLength; a SAP can only subscribe to one of CUDF, sub-address, or CAE routing at a time. Default is false (not subscribed); an admin enables this when the routing decision needs to be driven by application-layer data embedded in the call rather than the dialed X.121 address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.98 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingCUDF
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.98.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingCUDF.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.98.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrRouteUsingCUDF OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.98 | x25SapSbscrRouteUsingCUDF | CXX25-MIB |