All MIBs › CXX25-MIB › x25SapSbscrRouteUsingCAE
x25SapSbscrRouteUsingCAE
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrRouteUsingCAE
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.100
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines if this SAP uses the called address extension facility for routing. This facility applies to incoming calls only.
Each SAP can only subscribe to one of the following routing decisions:
-Route using the call user data field (object x25SapRouteUsingCUDF)
-Route using sub-address (object x25SapRouteUsingSubAddress)
-Route using the called address extension facility (object x25SapRouteUsingCAE)
Options: false (1): Not subscribed. This SAP does not look at the called address extension facility for routing information.
true (2): Subscribed: This SAP uses digits found in the called address extension facility of incoming calls as the destination address for routing. The number of digits used for routing is specified as part of the facility within the incoming call. This SAP will refuse the incoming call if the called address extension facility is not present.
Default Value: false (1)
Configuration Changed: administrative and operative
What is x25SapSbscrRouteUsingCAE?
Controls whether this SAP routes incoming calls using the Called Address Extension facility, refusing any incoming call that lacks this facility if enabled; mutually exclusive with the CUDF and subaddress routing options. Default is false; an admin enables this when the connected network signals routing information via the standard CAE facility rather than the called address or subaddress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.100 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingCAE
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.100.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrRouteUsingCAE.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.100.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrRouteUsingCAE OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.100 | x25SapSbscrRouteUsingCAE | CXX25-MIB |