All MIBs › CXX25-MIB › x25SapSbscrPermissionToRedirect
x25SapSbscrPermissionToRedirect
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrPermissionToRedirect
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.93
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines if this SAP subscribes to the Permission to Redirect facility. This facility applies to incoming calls only.
Options: false (1): Not subscribed. This SAP refuses incoming calls even if the outgoing side subscribes to the Call Redirection facility and supplies a redirection address.
true (2): Subscribed: This SAP redirects incoming calls to the redirection address specified by the outgoing side which refused the outgoing call. The redirection address is only supplied by an outgoing side if it subscribes to the Call Redirection facility, and is configured with a redirection address.
Default Value: false (1)
Configuration Changed: administrative and operative
What is x25SapSbscrPermissionToRedirect?
Controls whether this SAP subscribes to the Permission to Redirect facility on incoming calls: subscribed (true) allows this SAP's incoming calls to be redirected to an address supplied by an outgoing side that subscribes to Call Redirection; not subscribed (false), the default, causes such calls to be refused even if redirection was offered. An admin enables this on the originating SAP so its calls can be transparently redirected elsewhere when the primary destination is unavailable, per X.25 Section 6.25.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.93 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrPermissionToRedirect
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.93.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrPermissionToRedirect.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.93.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrPermissionToRedirect OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.93 | x25SapSbscrPermissionToRedirect | CXX25-MIB |