All MIBs › CXX25-MIB › x25SapSbscrCallingAddressValidation
x25SapSbscrCallingAddressValidation
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrCallingAddressValidation
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.96
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object applies only to lower SAPs (service access points).
Determines if this SAP subscribes to the Calling Address Validation facility. This facility applies to incoming calls only. This facility can be used for security purposes to restrict calls originating from a specific source.
Options: false (1): Not subscribed. This SAP does not insert nor validate any calling address contained within incoming calls.
true (2): Subscribed: This SAP inserts the calling address (x25SapSourceAddress) into incoming call packets that do not contain one, prior to routing the call. For incoming calls that do contain a calling address, this SAP validates it against that specified address (x25SapSourceAddress). If the addresses match, the incoming call is routed, otherwise the incoming call is cleared.
Default Value: false (2)
Related Objects: x25SapSourceAddress
Configuration Changed: administrative and operative
What is x25SapSbscrCallingAddressValidation?
For lower SAPs only, controls whether this SAP validates or inserts the calling address on incoming calls for security: subscribed (true) inserts x25SapSourceAddress into incoming calls that lack a calling address, and validates incoming calls that do carry one against x25SapSourceAddress, clearing the call on mismatch; default is false (no validation). An admin enables this to restrict which calling parties are permitted to originate calls into this SAP, effectively an address-based access control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.96 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrCallingAddressValidation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.96.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrCallingAddressValidation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.96.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrCallingAddressValidation OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.96 | x25SapSbscrCallingAddressValidation | CXX25-MIB |