All MIBs › CXX25-MIB › x25SapSbscrCalledAddressInsertion
x25SapSbscrCalledAddressInsertion
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapSbscrCalledAddressInsertion
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.80
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object applies only to lower SAPs (service access points).
Determines if this SAP inserts the called address in Call Accept packets, and if the called address is validated. The behavior of this facility changes depending on the whether this SAP routes calls to an upper or lower SAP. See the X25RouteTable for more information on routes. This object only applies to the source SAP in a route.
Options: false (1): Not subscribed: no action is taken.
true (2): Subscribed: When this SAP receives a Call Accepted packet that contains a called address, it verifies the address against the called address contained in the Incoming Call packet. If they do not match, the call is cleared.
When this SAP receives a Call Accepted packet that does not contain a called address, the action it takes depends on the type of route.
If routing to an upper SAP, then the called address from the Incoming Call packet is inserted into the Call Accepted packet.
If routing to a lower SAP, no action is taken.
Default Value: true (2)
Configuration Changed: administrative and operative
What is x25SapSbscrCalledAddressInsertion?
For lower SAPs only, controls whether this SAP inserts and validates the called address on Call Accepted packets: when subscribed (true, the default), a called address present in the Call Accepted is checked against the original Incoming Call and the call is cleared on mismatch, and a missing called address is auto-inserted when routing to an upper SAP. An admin disables this (false) if the connected equipment doesn't handle called-address facilities correctly during call acceptance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.80 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapSbscrCalledAddressInsertion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.80.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapSbscrCalledAddressInsertion.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.80.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapSbscrCalledAddressInsertion OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.80 | x25SapSbscrCalledAddressInsertion | CXX25-MIB |