All MIBs › CXX25-MIB › x25SapModulo
x25SapModulo
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapModulo
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.31
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object applies only to lower SAPs (service access points).
Determines the range of sequence numbers available for packet numbering at this SAP (service access point). The modulo specified for this object must match that specified on the destination SAP for a route to be successful. If not, this SAP will refuse the call.
Options: modulo8 (1): Sequence numbers range from 0 to 7, supporting a maximum window size of 8.
modulo128 (2): Sequence numbers range from 0 to 128, supporting a maximum window size of 128
Default Value: modulo8 (1)
Related Objects: x25SapRxWindowSize x25SapTxWindowSize x25PvcRxWindow x25PvcTxWindow
Configuration Changed: administrative
What is x25SapModulo?
Selects the packet sequence-numbering range for this lower SAP: modulo8(1), the default, allows sequence numbers 0-7 (window up to 8), while modulo128(2) allows 0-127 (window up to 128) for higher-throughput links. The modulo configured here must match the destination SAP's setting or the call is refused, and it directly bounds the legal range for x25SapRxWindowSize/x25SapTxWindowSize.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.31 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapModulo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.31.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapModulo.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.31.1 i <value>
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapModulo OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.31 | x25SapModulo | CXX25-MIB |