All MIBs › CXX25-MIB › x25SapFlowControlState
x25SapFlowControlState
Module: CXX25-MIB
OID (symbolic): CXX25-MIB::x25SapFlowControlState
OID (numeric): 1.3.6.1.4.1.495.2.1.6.29.21.1.126
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the status of flow control on this SAP (service access point).
Flow control is initiated by this SAP when overall system resources drop lower than the percentage specified by the global object x25UpperPoolThreshold, and are terminated when the overall system resources exceed the percentage specified by the global object x25UpperPoolThreshold.
Options: flowNormal (1): Data flow is normal. No flow control procedures are active.
flowStopped (2): Flow control procedures are active, since overall system resources have dropped lower than the percentage specified by global object x25LowerPoolThreshold. noFlow (3): Indicates this SAP is configured incorrectly.
Related Objects: x25UpperPoolThreshold
What is x25SapFlowControlState?
Reports whether this SAP is currently under flow control: flowNormal(1) means data flows normally, flowStopped(2) means flow control is active because system resources dropped below x25LowerPoolThreshold, and noFlow(3) indicates the SAP is misconfigured. An admin monitors this to detect resource-pressure-induced throttling on the SAP, correlating with the global x25LowerPoolThreshold/x25UpperPoolThreshold thresholds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.126 snmpwalk -v2c -c public <target> CXX25-MIB::x25SapFlowControlState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.29.21.1.126.1 snmpget -v2c -c public <target> CXX25-MIB::x25SapFlowControlState.1
Start monitoring Memotec/Aastra X.25 WAN access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXX25-MIB::x25SapFlowControlState OID value, configure state conditions and alerts, and monitor any Memotec/Aastra X.25 WAN access devices from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.29 | cxX25 | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1 | x25SapEntry | CXX25-MIB |
| 1.3.6.1.4.1.495.2.1.6.29.21.1.126 | x25SapFlowControlState | CXX25-MIB |