All MIBs › CXTRDIo-MIB › trdSapAdmDataGenerator
trdSapAdmDataGenerator
Module: CXTRDIo-MIB
OID (symbolic): CXTRDIo-MIB::trdSapAdmDataGenerator
OID (numeric): 1.3.6.1.4.1.495.2.1.6.51.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether the Data Generator is enabled. The Data Generator is used for testing purposes.
Options:
disabled (1)
enabled (2)
enabled-verify (3): The Data Generator is enabled, and checks data it receives against data it has sent. The result of the test is displayed in trdStatOprRxGenErrors.
Default Value: disabled (1)
Configuration Changed: administrative
Further Action: to activate changed value, click on Action in EMS menu bar, then click on Reset with Save.
What is trdSapAdmDataGenerator?
This sets the planned state of the port's built-in test data generator: disabled, enabled, or enabled with receive verification. An admin configures this to schedule a data generator test for the next time the configuration is applied, noting that activating the new value requires a Reset with Save action in the management console. For example, setting this to enabled-verify and then performing a Reset with Save schedules a verify-mode loopback test on that port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.51.2.1.8 snmpwalk -v2c -c public <target> CXTRDIo-MIB::trdSapAdmDataGenerator
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.51.2.1.8.1 snmpget -v2c -c public <target> CXTRDIo-MIB::trdSapAdmDataGenerator.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.51.2.1.8.1 i <value>
Start monitoring 3Com/CXProduct WAN switch hardware (Token Ring interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXTRDIo-MIB::trdSapAdmDataGenerator OID value, configure state conditions and alerts, and monitor any 3Com/CXProduct WAN switch hardware (Token Ring interface) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.51 | cxTrdIo | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.51.2 | trdSapAdmTable | CXTRDIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.51.2.1 | trdSapAdmEntry | CXTRDIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.51.2.1.8 | trdSapAdmDataGenerator | CXTRDIo-MIB |