All MIBs › CXSDLC-MIB › sdlcCuWaitForNextSnrmOrXid
sdlcCuWaitForNextSnrmOrXid
Module: CXSDLC-MIB
OID (symbolic): CXSDLC-MIB::sdlcCuWaitForNextSnrmOrXid
OID (numeric): 1.3.6.1.4.1.495.2.1.6.37.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object applies only if this entry is associated with an HIU service access point.
Determines what the HIU does when it receives a UA or XID response from the control unit (on the TIU side of the link).
Options: no (1): The HIU sends the UA or XID response to the host immediately.
yes (2): The HIU holds the UA or XID response until the host repeats the original poll. This is used in cases where the delay on the link between the HIU and TIU can cause the host to time out.
Default Value: no (1)
Configuration Changed: administrative and operative
What is sdlcCuWaitForNextSnrmOrXid?
This read-write value, applicable only to HIU SAPs, controls whether the HIU forwards a UA/XID response to the host immediately, no(1, default), or holds it until the host repeats its original poll, yes(2), which helps when TIU-HIU link delay would otherwise cause the host to time out. An admin sets yes(2) on a slow WAN link between HIU and TIU to prevent host-side poll timeouts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.8 snmpwalk -v2c -c public <target> CXSDLC-MIB::sdlcCuWaitForNextSnrmOrXid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.8.1 snmpget -v2c -c public <target> CXSDLC-MIB::sdlcCuWaitForNextSnrmOrXid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.8.1 i <value>
Start monitoring SNA/SDLC protocol converter or gateway device (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXSDLC-MIB::sdlcCuWaitForNextSnrmOrXid OID value, configure state conditions and alerts, and monitor any SNA/SDLC protocol converter or gateway device (legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.37 | cxSDLC | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.37.2 | sdlcCuTable | CXSDLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.37.2.1 | sdlcCuEntry | CXSDLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.8 | sdlcCuWaitForNextSnrmOrXid | CXSDLC-MIB |