All MIBs › CXSDLC-MIB › sdlcCuMaxRetry
sdlcCuMaxRetry
Module: CXSDLC-MIB
OID (symbolic): CXSDLC-MIB::sdlcCuMaxRetry
OID (numeric): 1.3.6.1.4.1.495.2.1.6.37.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object applies only if this entry is associated with a TIU service access point.
Determines the number of times an unacknowledged DISC, SNRM, or XID is retransmitted during slow polling. A poll is retransmitted if an acknowledgment has not been received from the control unit before the sdlcCuSlowPollTimer expires. This timer is reset each time a DISC, SNRM, or XID is transmitted.
When this counter is exceeded, the link with this control unit is abandoned and a connection cleared message is forwarded to the SNA link conversion layer.
Range of Values: 1 - 50
Default Value: 3
Related Objects: sdlcCuPollAckTimer
Configuration Changed: administrative and operative
What is sdlcCuMaxRetry?
This read-write value (1-50, default 3), applicable only to TIU SAPs, sets how many times an unacknowledged DISC, SNRM, or XID is retransmitted during slow polling before the link to this control unit is abandoned and a connection-cleared message is sent up to SNALC. An admin raises this to give a slow-to-respond control unit more chances before the session is torn down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.7 snmpwalk -v2c -c public <target> CXSDLC-MIB::sdlcCuMaxRetry
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.7.1 snmpget -v2c -c public <target> CXSDLC-MIB::sdlcCuMaxRetry.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.37.2.1.7.1 i <value>
Start monitoring SNA/SDLC protocol converter or gateway device (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXSDLC-MIB::sdlcCuMaxRetry OID value, configure state conditions and alerts, and monitor any SNA/SDLC protocol converter or gateway device (legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.37 | cxSDLC | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.37.2 | sdlcCuTable | CXSDLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.37.2.1 | sdlcCuEntry | CXSDLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.37.2.1.7 | sdlcCuMaxRetry | CXSDLC-MIB |