CXQLLC-MIB :: qllcDteType

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › CXQLLC-MIB › qllcDteType

qllcDteType

Module: CXQLLC-MIB

OID (symbolic): CXQLLC-MIB::qllcDteType

OID (numeric): 1.3.6.1.4.1.495.2.1.6.38.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines the type of interface (HIU or TIU) associated with this DTE.

Options: terminalInterfaceUnit (1): The SAP type is a TIU, which means it is connected to one or more control units (secondary link stations). The TIU emulates a primary link station, and polls the attached control units. The SDLC interface can support a total of 64 control units across all TIU SAPs.

hostInterfaceUnit (2): The SAP type is an HIU, which means it is connected to an SNA host (primary link station). The HIU emulates the control units connected to a TIU. It responds to polls issued by the host.

Default Value: terminalInterfaceUnit (1)

Configuration Changed: administrative

What is qllcDteType?

qllcDteType sets whether this DTE acts as a terminalInterfaceUnit(1), polling attached control units as a primary link station, or a hostInterfaceUnit(2), emulating control units toward an SNA host; the SDLC interface supports up to 64 control units total across all TIU SAPs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.38.2.1.4
snmpwalk -v2c -c public <target> CXQLLC-MIB::qllcDteType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.38.2.1.4.1
snmpget -v2c -c public <target> CXQLLC-MIB::qllcDteType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.38.2.1.4.1 i <value>

Start monitoring Aastra/CX Memotec SNA gateway device (QLLC over X.25) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXQLLC-MIB::qllcDteType OID value, configure state conditions and alerts, and monitor any Aastra/CX Memotec SNA gateway device (QLLC over X.25) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.38cxQLLCCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.38.2qllcDteTableCXQLLC-MIB
1.3.6.1.4.1.495.2.1.6.38.2.1qllcDteEntryCXQLLC-MIB
1.3.6.1.4.1.495.2.1.6.38.2.1.4qllcDteTypeCXQLLC-MIB