All MIBs › CXQLLC-MIB › qllcDteState
qllcDteState
Module: CXQLLC-MIB
OID (symbolic): CXQLLC-MIB::qllcDteState
OID (numeric): 1.3.6.1.4.1.495.2.1.6.38.2.1.32
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the state of this DTE with regards to SNA traffic.
Options:
opened (1): Indicates that this DTE is in data transfer mode (a QSM was sent and a QUA was received).
closed (2): Indicates that this DTE is not in data transfer mode (QSM not sent or QUA not received).
xidcmd (3): Indicates that an XID was sent by the TIU and received by the HIU.
tstcmd (4): Indicates that a TEST was sent by the TIU and received by the HIU.
xiddrsp (5): Indicates that the HIU received an XID response from the TIU, or that the TIU received an XID response from the control unit.
tsttrsp (6): Indicates that the HIU received a TEST response from the TIU, or that the TIU received a TEST response from the control unit.
reset (7): Indicates that an X.25 reset was received.
setmode (8): Indicates that a QSM was received.
disc (9): Indicates that the HIU received a DISC from the host, or that the TIU sent a DISC to the control unit.
reqdisc (10): Indicates that the HIU sent a DISC to the host, or that the TIU received a DISC from the control unit.
unknown (11): Indicates that an unknown condition has occurred.
What is qllcDteState?
qllcDteState reports this DTE's detailed SNA traffic state, such as opened when data transfer is active, closed when it is not, or intermediate states like xidcmd, tstcmd, reset, and disc, giving an admin fine-grained insight into where a stalled SNA session is stuck.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.38.2.1.32 snmpwalk -v2c -c public <target> CXQLLC-MIB::qllcDteState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.38.2.1.32.1 snmpget -v2c -c public <target> CXQLLC-MIB::qllcDteState.1
Start monitoring Aastra/CX Memotec SNA gateway device (QLLC over X.25) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXQLLC-MIB::qllcDteState OID value, configure state conditions and alerts, and monitor any Aastra/CX Memotec SNA gateway device (QLLC over X.25) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.38 | cxQLLC | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.38.2 | qllcDteTable | CXQLLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.38.2.1 | qllcDteEntry | CXQLLC-MIB |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.32 | qllcDteState | CXQLLC-MIB |