CXMLPPP-MIB :: mlpppUSapLcInitialMRRU

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCXMLPPP-MIBmlpppUSapLcInitialMRRU

mlpppUSapLcInitialMRRU

Module: CXMLPPP-MIB

OID (symbolic): CXMLPPP-MIB::mlpppUSapLcInitialMRRU

OID (numeric): 1.3.6.1.4.1.495.2.1.6.49.51.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is not implemented in this release.

Determines the Maximum Receive Reconstructed Unit (MRRU) in octets proposed by the local port. The local port's proposed MRRU is negotiated with the remote port's proposed MRRU. The result of the negotiation is displayed in mlpppLSapLsLocalMRRU on the mlpppLSapLsTable table.

If this value is 0, then no negotiation will occur with the remote, and the default MRRU of 1500 octets is used; otherwise, the local PPP link will negotiate for this value with the remote peer.

Range of Values: 0 - 2048

Default Value: 1500

Configuration Changed: administrative

What is mlpppUSapLcInitialMRRU?

This OID is documented as not implemented in this release, and would set the Maximum Receive Reconstructed Unit, in octets, this local port proposes for the bundle, defaulting to 1500. An engineer should not rely on setting this object to affect real behavior until a release note confirms MRRU negotiation support.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.49.51.1.20
snmpwalk -v2c -c public <target> CXMLPPP-MIB::mlpppUSapLcInitialMRRU

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.49.51.1.20.1
snmpget -v2c -c public <target> CXMLPPP-MIB::mlpppUSapLcInitialMRRU.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.49.51.1.20.1 i <value>

Start monitoring Aastra ConvertedX (CX) WAN router (MLPPP bundling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXMLPPP-MIB::mlpppUSapLcInitialMRRU OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN router (MLPPP bundling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.49cxMLPPPCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.49.51mlpppUSapTableCXMLPPP-MIB
1.3.6.1.4.1.495.2.1.6.49.51.1mlpppUSapEntryCXMLPPP-MIB
1.3.6.1.4.1.495.2.1.6.49.51.1.20mlpppUSapLcInitialMRRUCXMLPPP-MIB