All MIBs › CXGIM-MIB › gimSapProtocolId
gimSapProtocolId
Module: CXGIM-MIB
OID (symbolic): CXGIM-MIB::gimSapProtocolId
OID (numeric): 1.3.6.1.4.1.495.2.1.6.55.10.1.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Defines the protocol format that is used for incoming call or call request packets to the X.25 call data field.
The field consists of 4 hexadecimal octets where the first octet is coded as follows:
ASYNC PAD
bits 8 & 7
- 00 for CCITT use - 01 for national use - 10 reserved for international user bodies - 11 for DTE-DTE use
When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and may be shown as 1, 0, 0, 0.
IP over X.25
The value hex CC is required for IP.
All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future mechanism for providing the called PAD or packet mode DTE (user) with additional information pertaining to the calling party.
A value of 00,00,00,00 will disable the protocol id formatting for x.25 call request packet or validation for incoming call.
Default Value: 01,00,00,00
Configuration Changed: Operative
What is gimSapProtocolId?
Read-write 4-octet hex protocol ID placed into outgoing X.25 call packets or checked on incoming ones; the default 01,00,00,00 marks CCITT ASYNC PAD use, hex CC signals IP-over-X.25, and all-zero (00,00,00,00) disables the check.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.55.10.1.7 snmpwalk -v2c -c public <target> CXGIM-MIB::gimSapProtocolId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.55.10.1.7.1 snmpget -v2c -c public <target> CXGIM-MIB::gimSapProtocolId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.55.10.1.7.1 s <value>
Start monitoring Aastra Generic Interface Module (GIM) access/transport platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXGIM-MIB::gimSapProtocolId OID value, configure state conditions and alerts, and monitor any Aastra Generic Interface Module (GIM) access/transport platform from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.55 | cxGim | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.55.10 | gimSapTable | CXGIM-MIB |
| 1.3.6.1.4.1.495.2.1.6.55.10.1 | gimSapEntry | CXGIM-MIB |
| 1.3.6.1.4.1.495.2.1.6.55.10.1.7 | gimSapProtocolId | CXGIM-MIB |