CXFrameRelayInterfaceModule-MIB :: frimSapFrWindowSize

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXFrameRelayInterfaceModule-MIB › frimSapFrWindowSize

frimSapFrWindowSize

Module: CXFrameRelayInterfaceModule-MIB

OID (symbolic): CXFrameRelayInterfaceModule-MIB::frimSapFrWindowSize

OID (numeric): 1.3.6.1.4.1.495.2.1.6.2.3.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates the maximum number of outstanding data buffers supported by this SAP. This object is meaningful only if 'frimSapType' for this SAP is set to 'lower'.

Range of Values: 3 - 300

Default Value: 150

Configuration Changed: administrative

What is frimSapFrWindowSize?

On a lower-type SAP, sets the maximum number of outstanding data buffers the SAP supports, from 3 to 300 with a default of 150. An admin increases this to allow more frames in flight on a higher-bandwidth or higher-latency frame relay link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.2.3.1.9
snmpwalk -v2c -c public <target> CXFrameRelayInterfaceModule-MIB::frimSapFrWindowSize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.2.3.1.9.1
snmpget -v2c -c public <target> CXFrameRelayInterfaceModule-MIB::frimSapFrWindowSize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.2.3.1.9.1 i <value>

Start monitoring Legacy Crosscomm CX900/CX1000 router (Frame Relay SAP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelayInterfaceModule-MIB::frimSapFrWindowSize OID value, configure state conditions and alerts, and monitor any Legacy Crosscomm CX900/CX1000 router (Frame Relay SAP) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.2cxFrameRelayInterfaceModuleCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.2.3frimSapTableCXFrameRelayInterfaceModule-MIB
1.3.6.1.4.1.495.2.1.6.2.3.1frimSapEntryCXFrameRelayInterfaceModule-MIB
1.3.6.1.4.1.495.2.1.6.2.3.1.9frimSapFrWindowSizeCXFrameRelayInterfaceModule-MIB