All MIBs › CXFrameRelayInterfaceModule-MIB › frimSRDestSubRef
frimSRDestSubRef
Module: CXFrameRelayInterfaceModule-MIB
OID (symbolic): CXFrameRelayInterfaceModule-MIB::frimSRDestSubRef
OID (numeric): 1.3.6.1.4.1.495.2.1.6.2.6.1.8
Node type: OBJECT-TYPE
Type: SubRef
Access: read-write
Description: Determines the identifier that one user's traffic segment will have to distinguish it from another user's traffic segment sharing the same 'frimSRDestFrpCircuitAlias'.
Note: If 'frimSRSubRef' and 'frimSRRefRangeEnd' form a range of identifiers that different users' traffic segments on the same outbound PVC can use to remain distinct from each other, the first value for 'frimSRSubRef' will correspond to the first value for 'frimSRDestSubRef, the second value for the former must correspond to the second value for the latter and so on.
Range of Values: 0 - 255
Default Value: none (value set in 'frimSRSubRef'
Configuration Changed: operative
What is frimSRDestSubRef?
Sets the identifier (0-255) that distinguishes one user's traffic segment from another's when they share the destination named in frimSRDestFrpCircuitAlias. An admin coordinates this value with the corresponding frimSRSubRef/frimSRRefRangeEnd range so traffic segments map correctly end to end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.2.6.1.8 snmpwalk -v2c -c public <target> CXFrameRelayInterfaceModule-MIB::frimSRDestSubRef
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.2.6.1.8.1 snmpget -v2c -c public <target> CXFrameRelayInterfaceModule-MIB::frimSRDestSubRef.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.2.6.1.8.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frimSRDestSubRef.1
Start monitoring Legacy Crosscomm CX900/CX1000 router (Frame Relay SAP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelayInterfaceModule-MIB::frimSRDestSubRef OID value, configure state conditions and alerts, and monitor any Legacy Crosscomm CX900/CX1000 router (Frame Relay SAP) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.2 | cxFrameRelayInterfaceModule | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.2.6 | frimSRTable | CXFrameRelayInterfaceModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.2.6.1 | frimSREntry | CXFrameRelayInterfaceModule-MIB |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.8 | frimSRDestSubRef | CXFrameRelayInterfaceModule-MIB |