All MIBs › CXBsc-MIB › bscPollIntAfterAckTimer
bscPollIntAfterAckTimer
Module: CXBsc-MIB
OID (symbolic): CXBsc-MIB::bscPollIntAfterAckTimer
OID (numeric): 1.3.6.1.4.1.495.2.1.6.56.10.1.8
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: This object applies only to a service access point functioning as a TIU. Determines the length of time allowed to elapse between the reception of an acknowledgment to a poll and the transmission of the next poll. Certain control units require a delay in order to successfully respond to polls.
Since multiple BSC logical links may share the same SAP (i.e., multiple control units communicating on the same physical link), this timer applies globally to all logical links using this SAP.
Range of values: 1 - 250 (in tenths of a second), a value of 0 disables the timer.
What is bscPollIntAfterAckTimer?
This read-write timer, in tenths of a second (1-250, with 0 disabling it), controls how long a Terminal Interface Unit SAP waits after a control unit acknowledges a poll before sending the next one, since some control units need extra time to respond. Because multiple BSC logical links can share one SAP, an admin tunes this globally for the SAP when a connected device is missing polls due to being too slow to recover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.56.10.1.8 snmpwalk -v2c -c public <target> CXBsc-MIB::bscPollIntAfterAckTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.56.10.1.8.1 snmpget -v2c -c public <target> CXBsc-MIB::bscPollIntAfterAckTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.56.10.1.8.1 i <value>
Start monitoring Memotec CX BSC/SNA protocol converter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXBsc-MIB::bscPollIntAfterAckTimer OID value, configure state conditions and alerts, and monitor any Memotec CX BSC/SNA protocol converter from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.56 | cxBsc | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.56.10 | bscSapTable | CXBsc-MIB |
| 1.3.6.1.4.1.495.2.1.6.56.10.1 | bscSapEntry | CXBsc-MIB |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.8 | bscPollIntAfterAckTimer | CXBsc-MIB |