CXBRI-MIB :: briTxcvrComTestPollResult

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXBRI-MIB › briTxcvrComTestPollResult

briTxcvrComTestPollResult

Module: CXBRI-MIB

OID (symbolic): CXBRI-MIB::briTxcvrComTestPollResult

OID (numeric): 1.3.6.1.4.1.495.2.1.8.4.10.1.25

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates the result of the ISDN U or S/T-interface transceiver internal communication test while in polling mode.

Options: initializationFailed (1): IMP initialization failed

failed (2): transceiver communication test failed in polling mode

passed (3): transceiver communication test passed in polling mode

Default Value: passed (3)

What is briTxcvrComTestPollResult?

This read-only INTEGER reports the result of the ISDN U or S/T-interface transceiver's internal communication self-test as run while the interface is in polling mode, returning initializationFailed(1), failed(2), or passed(3). It lets an admin tell a transceiver communication failure apart from an IMP communication failure on the same BRI port, narrowing down where a persistent line fault lives. For instance, seeing passed(3) here while briImpComTestPollResult reports failed(2) would point the troubleshooting effort at the IMP rather than the transceiver.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.8.4.10.1.25
snmpwalk -v2c -c public <target> CXBRI-MIB::briTxcvrComTestPollResult

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.8.4.10.1.25.1
snmpget -v2c -c public <target> CXBRI-MIB::briTxcvrComTestPollResult.1

Start monitoring Aastra PBX/telephony chassis (BRI ISDN line cards) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXBRI-MIB::briTxcvrComTestPollResult OID value, configure state conditions and alerts, and monitor any Aastra PBX/telephony chassis (BRI ISDN line cards) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.8cxPrivateCXProduct-SMI
1.3.6.1.4.1.495.2.1.8.4cxBriCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.8.4.10briTableCXBRI-MIB
1.3.6.1.4.1.495.2.1.8.4.10.1briEntryCXBRI-MIB
1.3.6.1.4.1.495.2.1.8.4.10.1.25briTxcvrComTestPollResultCXBRI-MIB