All MIBs › CXBCM-MIB › bcmUSapLastDisconnectCause
bcmUSapLastDisconnectCause
Module: CXBCM-MIB
OID (symbolic): CXBCM-MIB::bcmUSapLastDisconnectCause
OID (numeric): 1.3.6.1.4.1.495.2.1.6.48.52.1.47
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the codes for the cause of a disconnect.
Cause Values: For each class, the description of its cause value is given. Note that the value corresponds to the decimal value of the 7 least significant bits since the bit 8 is always set to 1.
Class 000, Normal Events: 1 Unassigned number 2 No route to specified transit network 3 No route to destination 6 Channel unacceptable 7 Call awarded and deliivered in an established channel 16 Normal call clearing 17 User busy 18 No user responding 19 User alerting, no answer 21 Call rejected 22 Number changed 26 Non-selected user clearing 27 Destination out of order 28 Invalid number format (incompatible number) 29 Facility rejected 30 Response to STATUS ENQUIRY 31 Normal unspecified
Class 010, Network Congestion: 34 No circuit/channel available 38 Network out of order 41 Temporary failure 42 Switching equipment congestion 43 User info discarded 44 Requested channel not available 47 Resources unavailable - unspecified
Class 011, Service or Option Not Available: 49 Quality of service unavailable 50 Requested facility not subscribed 57 Bearer capability not authorized 58 Bearer capability not presently authorized 63 Service or option not available, unspecified or Option Not Implemented: 65 Bearer capability not implemented 66 Channel type not implemented 69 Requested facility not implemented 70 Only restricted digital information bearer capability is available 79 Service or option not implemented, unspecified
Class 101, Invalid Message: 81 Invalid call reference value 82 Identified channel does not exist 83 Suspended call exits, but this call identity does not 84 Call identity in use 85 No call suspended 86 Call having the requested call identity has been cleared 88 Incompatible destination 91 Invalid transit network selection 95 Invalid message, unspecified
Class 110, Protocol Error: 96 Mandatory information element is missing 97 Message type non-existent or not implemented 98 Message not compatible with call state or message type non-existent of not implemented 99 Information element non-existent or not implemented 100 Invalid information element contents 101 Message not compatible with call state 102 Recovery on time expiry 111 Protocol error, unspecified
Class 111, Interworking: 127 Interworking, unspecified
Range of Values: 0-127
Default Value: none
What is bcmUSapLastDisconnectCause?
Read-only integer (0-127) giving the Q.931 cause code for why this upper SAP's last call ended, per the extensive cause-code table in the MIB (e.g. 16=normal call clearing, 17=user busy, 34=no circuit/channel available). Check this after an unexpectedly short or failed call to diagnose whether it was a normal hangup, network congestion, or a protocol error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.48.52.1.47 snmpwalk -v2c -c public <target> CXBCM-MIB::bcmUSapLastDisconnectCause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.48.52.1.47.1 snmpget -v2c -c public <target> CXBCM-MIB::bcmUSapLastDisconnectCause.1
Start monitoring Aastra/CX WAN access equipment (BCM bandwidth/connection management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXBCM-MIB::bcmUSapLastDisconnectCause OID value, configure state conditions and alerts, and monitor any Aastra/CX WAN access equipment (BCM bandwidth/connection management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.48 | cxBCM | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.48.52 | bcmUSapTable | CXBCM-MIB |
| 1.3.6.1.4.1.495.2.1.6.48.52.1 | bcmUSapEntry | CXBCM-MIB |
| 1.3.6.1.4.1.495.2.1.6.48.52.1.47 | bcmUSapLastDisconnectCause | CXBCM-MIB |