All MIBs › CXBCM-MIB › bcmUSapAnswerMode
bcmUSapAnswerMode
Module: CXBCM-MIB
OID (symbolic): CXBCM-MIB::bcmUSapAnswerMode
OID (numeric): 1.3.6.1.4.1.495.2.1.6.48.52.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines security for accepting incoming call indications from the DSL.
Options: answer-none (1): incoming calls not accepted
answer-all (2): incoming calls accepted even without match between 'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
answer-address (3): incoming calls accepted if there is an ISDN address fit between 'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
answer-subaddress (4): incoming calls accepted if there is an ISDN subaddress fit between 'bcmUSapLowDirectoryIndex' and 'bcmUSapHighDirectoryIndex'
Default Value: answer-none (1)
Configuration Changed: administrative
What is bcmUSapAnswerMode?
Read-write enum (answer-none/all/address/subaddress, defaults to answer-none) controlling what filtering is applied to incoming calls before this upper SAP accepts them, based on address or subaddress matching against its directory range. Set this to answer-address or answer-subaddress when you need call screening rather than accepting every inbound call unconditionally.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.48.52.1.12 snmpwalk -v2c -c public <target> CXBCM-MIB::bcmUSapAnswerMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.48.52.1.12.1 snmpget -v2c -c public <target> CXBCM-MIB::bcmUSapAnswerMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.48.52.1.12.1 i <value>
Start monitoring Aastra/CX WAN access equipment (BCM bandwidth/connection management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXBCM-MIB::bcmUSapAnswerMode OID value, configure state conditions and alerts, and monitor any Aastra/CX WAN access equipment (BCM bandwidth/connection management) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.48 | cxBCM | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.48.52 | bcmUSapTable | CXBCM-MIB |
| 1.3.6.1.4.1.495.2.1.6.48.52.1 | bcmUSapEntry | CXBCM-MIB |
| 1.3.6.1.4.1.495.2.1.6.48.52.1.12 | bcmUSapAnswerMode | CXBCM-MIB |