All MIBs › CXAtmPhy-MIB › atmPhyOperPlcpOOFDefectState
atmPhyOperPlcpOOFDefectState
Module: CXAtmPhy-MIB
OID (symbolic): CXAtmPhy-MIB::atmPhyOperPlcpOOFDefectState
OID (numeric): 1.3.6.1.4.1.495.2.1.6.61.30.1.10
Node type: OBJECT-TYPE
Type: ErrorState
Access: read-only
Description: Indicates the current PLCP Out Of Frame (OOF) defect state at this interface. An OOF is declared when an error is detected in both the A1 and A2 octets or when 2 consecutive POHID octets are found in error. AN OOF is removed and framing is declared upon finding 2 valid, consecutive set of frmaing (A1 and A2) octets and 2 valid and sequential path overhead identifier (POHID) octets.
What is atmPhyOperPlcpOOFDefectState?
A read-only ErrorState reporting whether this PLCP-framed interface currently has an Out Of Frame (OOF) defect, declared when both A1 and A2 framing octets are in error or two consecutive POHID octets are bad, and cleared once two valid consecutive framing octets and two valid sequential POHID octets are seen.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.30.1.10 snmpwalk -v2c -c public <target> CXAtmPhy-MIB::atmPhyOperPlcpOOFDefectState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.30.1.10.1 snmpget -v2c -c public <target> CXAtmPhy-MIB::atmPhyOperPlcpOOFDefectState.1
Start monitoring CX Memotec ATM access/gateway device (physical layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmPhy-MIB::atmPhyOperPlcpOOFDefectState OID value, configure state conditions and alerts, and monitor any CX Memotec ATM access/gateway device (physical layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.61 | cxAtmPhy | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.30 | atmPhyOperPlcpTable | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.30.1 | atmPhyOperPlcpEntry | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.10 | atmPhyOperPlcpOOFDefectState | CXAtmPhy-MIB |