All MIBs › CXAtmPhy-MIB › atmPhyConfTxIdleUnassignedCellPayload
atmPhyConfTxIdleUnassignedCellPayload
Module: CXAtmPhy-MIB
OID (symbolic): CXAtmPhy-MIB::atmPhyConfTxIdleUnassignedCellPayload
OID (numeric): 1.3.6.1.4.1.495.2.1.6.61.10.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the pattern inserted in the idle/unassigned cell payload. Idle/unassigned cells are inserted at this interface when the PHY device detects that the transmit FIFO contains no outstanding cells. The default pattern is 6AH, as defined by the ATM Forum UNI Specification.
What is atmPhyConfTxIdleUnassignedCellPayload?
A read-write INTEGER (0-255, default 106/0x6A per the ATM Forum UNI spec) setting the fill pattern inserted into idle/unassigned cell payloads whenever the transmit FIFO on this interface has no real cells queued.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.24 snmpwalk -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxIdleUnassignedCellPayload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.24.1 snmpget -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxIdleUnassignedCellPayload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.24.1 i <value>
Start monitoring CX Memotec ATM access/gateway device (physical layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmPhy-MIB::atmPhyConfTxIdleUnassignedCellPayload OID value, configure state conditions and alerts, and monitor any CX Memotec ATM access/gateway device (physical layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.61 | cxAtmPhy | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.10 | atmPhyInterfaceConfTable | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1 | atmPhyInterfaceConfEntry | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.24 | atmPhyConfTxIdleUnassignedCellPayload | CXAtmPhy-MIB |