All MIBs › CXAtmPhy-MIB › atmPhyConfTxFifoDepth
atmPhyConfTxFifoDepth
Module: CXAtmPhy-MIB
OID (symbolic): CXAtmPhy-MIB::atmPhyConfTxFifoDepth
OID (numeric): 1.3.6.1.4.1.495.2.1.6.61.10.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the size of the transmit FIFO in cells. Reducing the FIFO depth permits cell latencies to be minimized at this interface (through the PHY device).
It is not recommended that the FIFO depth be set to 1 cell, since half the bandwidth will be lost to idle/unassigned cells. For minimum latency and maximum throughput, a FIFO depth of 2 cells is suggested..
What is atmPhyConfTxFifoDepth?
A read-write INTEGER (1-4 cells, default 4) sizing the transmit FIFO on this interface; a depth of 2 cells is recommended for minimum latency and maximum throughput, while a depth of 1 wastes half the bandwidth on idle/unassigned cells.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.9 snmpwalk -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxFifoDepth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.9.1 snmpget -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxFifoDepth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.9.1 i <value>
Start monitoring CX Memotec ATM access/gateway device (physical layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmPhy-MIB::atmPhyConfTxFifoDepth OID value, configure state conditions and alerts, and monitor any CX Memotec ATM access/gateway device (physical layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.61 | cxAtmPhy | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.10 | atmPhyInterfaceConfTable | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1 | atmPhyInterfaceConfEntry | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.9 | atmPhyConfTxFifoDepth | CXAtmPhy-MIB |