All MIBs › CXAtmPhy-MIB › atmPhyConfTxClocking
atmPhyConfTxClocking
Module: CXAtmPhy-MIB
OID (symbolic): CXAtmPhy-MIB::atmPhyConfTxClocking
OID (numeric): 1.3.6.1.4.1.495.2.1.6.61.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines how the physical line's transmit clock will be derived. For DS1 and E1 ATM implementations, this object defines the interface clocking, and the corresponding clocking object at the DS1 and E1 layer becomes ineffective. This is contrary to non-ATM implementations where it is the clocking object at the DS1 and E1 layer that defines the interface clocking.
Options: synchronized (1): The transmit clock will be derived from the receive clock. This is more commonly referred to as 'loop' timing.
unsynchronized (2): The transmit clock will be derived internally from an oscillator, and will not be synchronized to the receive clock.
What is atmPhyConfTxClocking?
A read-write enumeration (default synchronized) choosing whether this ATM PHY interface derives its transmit clock from the receive clock (synchronized/loop timing) or from an internal oscillator (unsynchronized); for DS1/E1 ATM interfaces this setting overrides the DS1/E1 layer's own clocking object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.1 snmpwalk -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxClocking
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.1.1 snmpget -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfTxClocking.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.1.1 i <value>
Start monitoring CX Memotec ATM access/gateway device (physical layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmPhy-MIB::atmPhyConfTxClocking OID value, configure state conditions and alerts, and monitor any CX Memotec ATM access/gateway device (physical layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.61 | cxAtmPhy | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.10 | atmPhyInterfaceConfTable | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1 | atmPhyInterfaceConfEntry | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.1 | atmPhyConfTxClocking | CXAtmPhy-MIB |