All MIBs › CXAtmPhy-MIB › atmPhyConfPlcpBypass
atmPhyConfPlcpBypass
Module: CXAtmPhy-MIB
OID (symbolic): CXAtmPhy-MIB::atmPhyConfPlcpBypass
OID (numeric): 1.3.6.1.4.1.495.2.1.6.61.10.1.4
Node type: OBJECT-TYPE
Type: Switch
Access: read-write
Description: Defines whether all internal FIFOs are bypassed when this interface is configured for the PLCP framing format (object atmPhyConfFrameFormat value 'atmPlcp'). FIFO bypass can be used to reduce latency at this interface (through the PHY device).
This object will take on value 'disabled' in the initial phase since the ATM layer does not support cell rate decoupling, and idle/unassigned cell processing.
What is atmPhyConfPlcpBypass?
A read-write Switch (default disabled) that, when enabled, bypasses internal FIFOs on an interface configured for PLCP framing to reduce cell latency; the description notes it stays disabled in this implementation since the ATM layer does not yet support cell rate decoupling or idle/unassigned cell processing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.4 snmpwalk -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfPlcpBypass
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.4.1 snmpget -v2c -c public <target> CXAtmPhy-MIB::atmPhyConfPlcpBypass.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.61.10.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmPhyConfPlcpBypass.1
Start monitoring CX Memotec ATM access/gateway device (physical layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmPhy-MIB::atmPhyConfPlcpBypass OID value, configure state conditions and alerts, and monitor any CX Memotec ATM access/gateway device (physical layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.61 | cxAtmPhy | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.10 | atmPhyInterfaceConfTable | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1 | atmPhyInterfaceConfEntry | CXAtmPhy-MIB |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.4 | atmPhyConfPlcpBypass | CXAtmPhy-MIB |