CXAtmDxi-MIB :: atmDxiSapMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › CXAtmDxi-MIB › atmDxiSapMode

atmDxiSapMode

Module: CXAtmDxi-MIB

OID (symbolic): CXAtmDxi-MIB::atmDxiSapMode

OID (numeric): 1.3.6.1.4.1.495.2.1.6.58.11.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Defines the DXI operating mode to be used at the service access point.

What is atmDxiSapMode?

Selects the DXI operating mode for this service access point (interface) — mode-1a is the default; modeTransparent and modeLoopback support pass-through and diagnostic loopback configurations respectively.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.58.11.1.5
snmpwalk -v2c -c public <target> CXAtmDxi-MIB::atmDxiSapMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.58.11.1.5.1
snmpget -v2c -c public <target> CXAtmDxi-MIB::atmDxiSapMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.58.11.1.5.1 i <value>

Start monitoring CX Memotec WAN access gateway (ATM-DXI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAtmDxi-MIB::atmDxiSapMode OID value, configure state conditions and alerts, and monitor any CX Memotec WAN access gateway (ATM-DXI) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.58cxAtmDxiCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.58.11atmDxiSapTableCXAtmDxi-MIB
1.3.6.1.4.1.495.2.1.6.58.11.1atmDxiSapEntryCXAtmDxi-MIB
1.3.6.1.4.1.495.2.1.6.58.11.1.5atmDxiSapModeCXAtmDxi-MIB