All MIBs › CTRON-IP-ROUTER-MIB › nwIpWgIfOperStatus
nwIpWgIfOperStatus
Module: CTRON-IP-ROUTER-MIB
OID (symbolic): CTRON-IP-ROUTER-MIB::nwIpWgIfOperStatus
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The operational status of this interface (port) entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup defined for this entry's nwIpWgIfDefIdent or if the operational status for the workgroup in the definition table is not ok. It will be `addressConflict' if an entry in nwIpAddressTable is a conflict with the workgroup address of the definition. If there is no conflict and this entry's row status has just been activated, this operational status will be `resetRequired'. It will be `linkDown' if there are no physical connections on this interface and `routingDown' if routing or forwarding has been adminstratively disabled. If unspecified internal problems occur the status will be `internalError'.
What is nwIpWgIfOperStatus?
Reports the detailed operational state of this port's workgroup membership: workgroupInvalid if the referenced workgroup definition doesn't exist or isn't ok, addressConflict if an IP Address Table entry clashes with the workgroup's address, resetRequired right after this row is first activated, linkDown if the port has no physical connection, and routingDown if routing/forwarding has been administratively disabled on it, giving an admin a specific reason rather than a generic failure when workgroup membership isn't working.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6 snmpwalk -v2c -c public <target> CTRON-IP-ROUTER-MIB::nwIpWgIfOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6.1 snmpget -v2c -c public <target> CTRON-IP-ROUTER-MIB::nwIpWgIfOperStatus.1
Start monitoring Cabletron Systems IP router/Layer 3 switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-IP-ROUTER-MIB::nwIpWgIfOperStatus OID value, configure state conditions and alerts, and monitor any Cabletron Systems IP router/Layer 3 switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.1 | nwIpRouter | CTRON-IP-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2 | nwIpComponents | CTRON-IP-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11 | nwIpWorkGroup | CTRON-IP-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2 | nwIpWgIfTable | CTRON-IP-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1 | nwIpWgIfEntry | CTRON-IP-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6 | nwIpWgIfOperStatus | CTRON-IP-ROUTER-MIB |