CTRON-DECIV-ROUTER-MIB :: nwDecIVSysOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVSysOperStatus

nwDecIVSysOperStatus

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVSysOperStatus

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.2.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates the current operating condition of DECnet Phase IV Routing Services system-wide. The value of nwDecIVSysOperStatus indicates any problem with your DECnet Phase IV Routing Services configuration. A value of 6 indicates that regardless of the value of nwDecIVSysAdminStatus, DECnet Phase IV Routing Services is not operating because of an invalid configuration.

What is nwDecIVSysOperStatus?

nwDecIVSysOperStatus is a read-only value reporting the actual, current operating condition of DECnet Phase IV Routing Services system-wide, as distinct from the administratively requested state. An admin watches this because a value of 6 specifically flags that Routing Services is not actually running due to an invalid configuration, even if nwDecIVSysAdminStatus was set to enabled, a mismatch worth alerting on. For example, if an admin set nwDecIVSysAdminStatus to enabled but nwDecIVSysOperStatus reads 6, that discrepancy tells them a configuration error, not a deliberate shutdown, is preventing DECnet routing from operating.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.2.2
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVSysOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.2.2.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVSysOperStatus.1

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVSysOperStatus OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1nwDecIVSystemCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.2nwDecIVSysAdministrationCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.2.2nwDecIVSysOperStatusCTRON-DECIV-ROUTER-MIB