CTRON-DECIV-ROUTER-MIB :: nwDecIVProtoIfRequestDelay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVProtoIfRequestDelay

nwDecIVProtoIfRequestDelay

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfRequestDelay

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.

What is nwDecIVProtoIfRequestDelay?

nwDecIVProtoIfRequestDelay is defined by the MIB as a common object inherited from the shared Cabletron Routing Services framework, and the description explicitly states it does not apply to this protocol and that setting it has no effect. An admin should not rely on this object to pace any route-request retransmissions for DECnet Phase IV on this port, since the protocol doesn't use the mechanism the object was defined for. For example, an admin trying to slow down request retransmission timing for this port's routing protocol would find that setting nwDecIVProtoIfRequestDelay has no effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfRequestDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfRequestDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8.1 i <value>

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfRequestDelay OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4nwDecIVTopologyCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1nwDecIVDistanceVectorCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1nwDecIVProtoCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2nwDecIVProtoInterfaceCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1nwDecIVProtoIfConfigCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1nwDecIVProtoIfTableCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1nwDecIVProtoIfEntryCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8nwDecIVProtoIfRequestDelayCTRON-DECIV-ROUTER-MIB