All MIBs › CTRON-DECIV-ROUTER-MIB › nwDecIVProtoIfPriority
nwDecIVProtoIfPriority
Module: CTRON-DECIV-ROUTER-MIB
OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfPriority
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the priority of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. Within an area, the router with the highest value for nwDecIVProtoIfPriority becomes the priority or designated router. The highest possible value for nwDecIVProtocolIfPriority is 127. Set this value high to cause your DECnet Phase IV Routing Services-enabled device to become the designated router. Set this value low to guarantee that it does not become the designated router.
What is nwDecIVProtoIfPriority?
nwDecIVProtoIfPriority is a read-write integer, up to a maximum of 127, that sets this port's priority for the DECnet Phase IV distance-vector-based routing protocol, where the router with the highest priority value in the area becomes the designated router. An admin raises this value to make this device's port more likely to win designated-router election, or lowers it to make that unlikely. For example, setting nwDecIVProtoIfPriority to 127 on this port all but guarantees this router becomes the designated router on that segment, since 127 is the highest possible priority value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9 snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9.1 snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9.1 i <value>
Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfPriority OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.3 | nwDecIVRouter | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2 | nwDecIVComponents | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4 | nwDecIVTopology | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1 | nwDecIVDistanceVector | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1 | nwDecIVProto | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2 | nwDecIVProtoInterface | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1 | nwDecIVProtoIfConfig | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1 | nwDecIVProtoIfTable | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1 | nwDecIVProtoIfEntry | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9 | nwDecIVProtoIfPriority | CTRON-DECIV-ROUTER-MIB |