CTRON-DECIV-ROUTER-MIB :: nwDecIVProtoIfFloodDelay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVProtoIfFloodDelay

nwDecIVProtoIfFloodDelay

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfFloodDelay

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this object has no effect.

What is nwDecIVProtoIfFloodDelay?

nwDecIVProtoIfFloodDelay is defined by the MIB as a common object inherited from the shared Cabletron Routing Services framework, and the description explicitly states it does not apply to this protocol and that setting it has no effect. An admin should not expect this object to control any flooding-delay behavior for DECnet Phase IV route advertisements on this port, since the protocol doesn't implement the feature the object was defined for. For example, unlike a link-state protocol that uses a flood delay to pace advertisements, writing to nwDecIVProtoIfFloodDelay here has no impact on this port's DECnet behavior.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfFloodDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfFloodDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7.1 i <value>

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfFloodDelay OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4nwDecIVTopologyCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1nwDecIVDistanceVectorCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1nwDecIVProtoCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2nwDecIVProtoInterfaceCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1nwDecIVProtoIfConfigCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1nwDecIVProtoIfTableCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1nwDecIVProtoIfEntryCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7nwDecIVProtoIfFloodDelayCTRON-DECIV-ROUTER-MIB