All MIBs › CTRON-DECIV-ROUTER-MIB › nwDecIVProtoIfAdvertisement
nwDecIVProtoIfAdvertisement
Module: CTRON-DECIV-ROUTER-MIB
OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfAdvertisement
OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the interval, in seconds, at which the DECnet Phase IV distance-vectorbased routing protocol advertises its route table on the router port for which the entry exists. Change this value to cause the DECnet Phase IV distance-vector-based routing protocol to advertise its route table more or less frequently on the router port.
What is nwDecIVProtoIfAdvertisement?
nwDecIVProtoIfAdvertisement is a read-write integer setting, in seconds, the interval at which the DECnet Phase IV distance-vector-based routing protocol advertises its route table on the router port identified by this row. An admin changes this to make the protocol advertise its routes more frequently for faster convergence, or less frequently to reduce control-traffic overhead on that specific port. For example, lowering nwDecIVProtoIfAdvertisement on a port with an unstable neighbor speeds up how quickly route changes propagate out through that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6 snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfAdvertisement
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6.1 snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfAdvertisement.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nwDecIVProtoIfAdvertisement.1
Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVProtoIfAdvertisement OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.2 | ctronExp | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.2.2 | ctronRouterExp | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2 | nwRouter | ROUTER-OIDS |
| 1.3.6.1.4.1.52.4.2.2.2.3 | nwRtrProtoSuites | ROUTER-OIDS |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.3 | nwDecIVRouter | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2 | nwDecIVComponents | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4 | nwDecIVTopology | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1 | nwDecIVDistanceVector | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1 | nwDecIVProto | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2 | nwDecIVProtoInterface | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1 | nwDecIVProtoIfConfig | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1 | nwDecIVProtoIfTable | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1 | nwDecIVProtoIfEntry | CTRON-DECIV-ROUTER-MIB |
| 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6 | nwDecIVProtoIfAdvertisement | CTRON-DECIV-ROUTER-MIB |