CTRON-DECIV-ROUTER-MIB :: nwDecIVNonBroadcastTimer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVNonBroadcastTimer

nwDecIVNonBroadcastTimer

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVNonBroadcastTimer

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.9

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-write

Description: Specifies the periodic interval (in seconds) at which DECnet Routing Services advertises its route table, on any non-broadcast networks attached to any router port configured and enabled for DECnet Phase IV Routing Services.

What is nwDecIVNonBroadcastTimer?

nwDecIVNonBroadcastTimer is a read-write TimeTicks value setting how often, in seconds, DECnet Phase IV Routing Services re-advertises its route table on non-broadcast-capable networks attached to enabled router ports. An admin tunes this on point-to-point or non-broadcast links to balance routing-update freshness against the overhead of periodic route-table advertisements on that link type. For example, on a low-bandwidth non-broadcast WAN link, an admin might raise nwDecIVNonBroadcastTimer so the route table is advertised less frequently, conserving the link's capacity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.9
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVNonBroadcastTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.9.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVNonBroadcastTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.9.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nwDecIVNonBroadcastTimer.1

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVNonBroadcastTimer OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1nwDecIVSystemCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1nwDecIVSysConfigCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.9nwDecIVNonBroadcastTimerCTRON-DECIV-ROUTER-MIB