CTRON-DECIV-ROUTER-MIB :: nwDecIVFwdIfOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVFwdIfOperStatus

nwDecIVFwdIfOperStatus

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfOperStatus

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates the current operating condition of DECnet Phase IV Routing Services on the router port for which the entry exists. The value of nwDecIVFwdIfOperStatus indicates any problem with the configuration of DECnet Phase IV Routing Services on the router port. value of 6 indicates that regardless of the value of nwDecIVFwdIfAdminStatus, DECnet Phase IV Routing Services is not operating because of an invalid port-level configuration.

What is nwDecIVFwdIfOperStatus?

nwDecIVFwdIfOperStatus is a read-only value reporting the actual operating condition of DECnet Phase IV Routing Services on the specific router port identified by this row, separate from the administratively requested state. An admin watches for a value of 6, which specifically means Routing Services is not operating on that port because of an invalid port-level configuration, regardless of what nwDecIVFwdIfAdminStatus was set to. For example, if a port's nwDecIVFwdIfAdminStatus is enabled but nwDecIVFwdIfOperStatus reads 6, the admin knows a configuration problem on that particular port, not a deliberate shutdown, is blocking DECnet routing there.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfOperStatus.1

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfOperStatus OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2nwDecIVForwardingCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2nwDecIVFwdInterfacesCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1nwDecIVFwdIfConfigCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1nwDecIVFwdIfTableCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1nwDecIVFwdIfEntryCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3nwDecIVFwdIfOperStatusCTRON-DECIV-ROUTER-MIB