CTRON-DECIV-ROUTER-MIB :: nwDecIVFwdIfFrameType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVFwdIfFrameType

nwDecIVFwdIfFrameType

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfFrameType

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the framing type for DECnet packets forwarded on the router port for which the entry exists. Some frame types are only valid for specific media types. The comments reflect those valid media types.

What is nwDecIVFwdIfFrameType?

nwDecIVFwdIfFrameType is a read-write enumeration specifying the framing type, such as ethernet(2) or snap(3), used for DECnet packets forwarded on this router port, noting that some frame types are only valid on certain media. An admin must set this to match what the attached media and remote DECnet devices expect, since choosing an incompatible frame type would prevent DECnet peers on that segment from parsing the packets correctly. For example, on an Ethernet segment where DECnet hosts expect SNAP encapsulation, an admin would set nwDecIVFwdIfFrameType to snap(3) rather than leaving it at plain ethernet(2) framing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfFrameType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfFrameType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8.1 i <value>

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfFrameType OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2nwDecIVForwardingCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2nwDecIVFwdInterfacesCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1nwDecIVFwdIfConfigCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1nwDecIVFwdIfTableCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1nwDecIVFwdIfEntryCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8nwDecIVFwdIfFrameTypeCTRON-DECIV-ROUTER-MIB