CTRON-DECIV-ROUTER-MIB :: nwDecIVFwdIfCtrAdminStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-DECIV-ROUTER-MIBnwDecIVFwdIfCtrAdminStatus

nwDecIVFwdIfCtrAdminStatus

Module: CTRON-DECIV-ROUTER-MIB

OID (symbolic): CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfCtrAdminStatus

OID (numeric): 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets the administrative state of the per-port DECnet packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactive.

What is nwDecIVFwdIfCtrAdminStatus?

nwDecIVFwdIfCtrAdminStatus is a read-write switch controlling whether the per-port DECnet packet and byte counters are actively accumulating on the router port identified by this row, with enabled(3) activating them and disabled(2) turning them off. An admin can disable counting on a specific port to save resources if that port's traffic isn't of interest, while still tracking counters elsewhere. For example, setting nwDecIVFwdIfCtrAdminStatus to disabled(2) on an idle port stops its per-port DECnet counters from incrementing without touching the counters on any other port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2
snmpwalk -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfCtrAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2.1
snmpget -v2c -c public <target> CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfCtrAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nwDecIVFwdIfCtrAdminStatus.1

Start monitoring Cabletron router/multiprotocol switch (legacy DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-DECIV-ROUTER-MIB::nwDecIVFwdIfCtrAdminStatus OID value, configure state conditions and alerts, and monitor any Cabletron router/multiprotocol switch (legacy DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.2ctronExpCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.2.2ctronRouterExpROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2nwRouterROUTER-OIDS
1.3.6.1.4.1.52.4.2.2.2.3nwRtrProtoSuitesROUTER-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.52.4.2.2.2.3.3nwDecIVRouterCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2nwDecIVComponentsCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2nwDecIVForwardingCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2nwDecIVFwdInterfacesCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2nwDecIVFwdIfCountersCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1nwDecIVFwdIfCtrTableCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1nwDecIVFwdIfCtrEntryCTRON-DECIV-ROUTER-MIB
1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2nwDecIVFwdIfCtrAdminStatusCTRON-DECIV-ROUTER-MIB